AME: MMI releases manufacturing trends for 2014-2015

Jacob Prak, CEO of Michigan Manufacturing International (MMI), provided an overview of manufacturing trends for the next 12 months. A mechanical engineer, Prak founded MMI in 1991. He has seen many changes over the last 23 years and is well-positioned to provide a comprehensive overview of the trends in manufacturing.

04/14/2014


According to Prak, U.S. manufacturing is getting a significant boost from the shale oil and gas boom. Cheaper natural gas feed stocks are making U.S.-produced plastics and other materials less expensive than in other parts of the world. This, in turn, will mean that finished products that rely on these materials will be more competitive.

Technology

Communication technology, he said, will continue to diminish obstacles associated with bringing together geographically disparate manufacturing expertise. Manufacturing will need to react to market trends more quickly as demand can now be developed nearly instantaneously through social and other media. Companies that are able to recognize and satisfy needs the fastest will be able to generate the highest rates of return. This means production lines and supply chains will need the flexibility to adapt quickly. Regarding the sales cycle, Prak said that product lifespans are shrinking and thus require a faster decision-making process.

Challenges

When asked what he sees as the biggest challenge for the manufacturing industry for the second half of 2014, Prak said, “Throughout the world, industry is facing headwinds due to taxation, regulation and political unrest. In many countries, governments are responsible for an ever-increasing share of buying decisions either through direct taxation and spending or by regulation. In many places, the rules that govern the economy can change on a whim, which makes production planning and the associated capital investment extremely risky. This leads to further economic erosion, which creates a challenge when it comes to manufacturing.”

Research and Development

Research and development spending, like any investment, only occurs when it is possible to envision a return, according to Prak. Because there is a great deal of uncertainty in the economy, any proposed research project will require both a higher expected rate of return and shorter payback schedule. Because of this, it is his view that fewer research endeavors will be undertaken.

3D Printing

It is Prak’s opinion that 3-D printing will have a positive effect on manufacturing because it will allow for inexpensive prototyping and sample production runs. “At the same time, 3-D printing does not pose a threat to traditional processes because the materials used in 3-D printing are not appropriate for the vast majority of applications. Furthermore, the cost of 3-D printing techniques is at least an order of magnitude higher than traditional methods when more than a few parts are made,” he said.

Localizing

When asked if there will be a focus on localizing products according to geographies, Prak said, “In our industry, shipping and distribution costs have been a relatively small portion of the overall cost of a particular product, but this is changing. As cost structures around the world equalize, it is probable that some production will move closer to the consumer.”

Conclusion

The next 12 months will be exciting in the field of manufacturing. Companies that are well aware of the changing situations and flexible enough to adapt will be in the best position to grow and succeed. With locations in China, India, Korea, Mexico and Vietnam, MMI is making an investment in sales and engineering, and adding personnel to meet the demand.

Jacob Prak is CEO of MMI. This post was originally published in AME's Target Online Magazine.



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
August 2018
Choosing an automation controller, Lean manufacturing
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me