AME: Building a more skilled labor market

How the manufacturing sector can close the skills gap.

07/11/2014


Courtesy: AME

 “Shop class” suffers from a long-standing image problem. The skills training taught there is increasingly viewed as a relic and an unnecessary expense as high schools have shifted their focus to placing students in four-year colleges while working within ever-tightening school budgets.

The Miller Center’s Milstein Commission on New Manufacturing , co-chaired by former Mississippi Governor Haley Barbour and former Indiana Governor and Senator Evan Bayh, was recently convened to identify and advance ideas that would encourage the growth of small and medium-size manufacturing enterprises (SMEs) and the middle-class jobs they provide.

Part of their focus was the skills gap widely acknowledged among manufacturing experts as a significant impediment to SME growth. Today, growing manufacturing enterprises frequently have trouble finding qualified workers.

And, what was one of the solutions proposed by commission members to close that gap and build a more skilled and responsive labor market?

You guessed it: shop class. 

A four-year college degree used to promise a more assured path to the American Dream, so educators emphasized preparation for higher education over vocational training. That simply is no longer the case. Droves of college graduates now enter the workforce overloaded with debt from student loans and experiencing greatly diminished prospects than college graduates before them.

At the same time, the manufacturing sector has undergone technological innovations that offer expanded opportunities for “makers” working within the 21st century marketplace. It is time for a new and slightly re-envisioned shop class to better link the skilled workforce with labor needs.

The Milstein Commission has proposed to expand skills training opportunities, particularly in the technology and engineering sectors as part of the high school curriculum. The commission proposes taking another step by recommending that high school students earn a certified, industry-recognized skill before graduating high school. Those certifications would function much like advanced placement tests, which offer transferrable college credits to students who score at a certain level on the placement exam.

“Manual skills alone aren’t enough, and neither is a 4-year college degree,” said John Aughenbaugh, a Project Lead the Way (PLTW) teacher at Warhill High School in Williamsburg, Virginia. PLTW is a program sponsored by the Association for Manufacturing Excellence that introduces high-school students to technical training through a host of elective courses, ranging from wood- and metal-working to computer modeling and 3-D design. Aughenbaugh noted high retention rates in these classes; more than half take more than two of the elective courses and approximately 25 percent take more than three; and highlights the importance of students gaining the technical expertise to move from designing something to actually making it.

Raven Sickal, a Warhill High School senior who took PLTW courses in computer-animated design, introduction to engineering and computer-integrated manufacturing, said a world opened up for her when she took those courses and visited local manufacturers as part of a PLTW-sponsored Manufacturing Day. After her graduation, she hopes to pursue an engineering career through the two-year professional track offered at the Newport News Apprentice School.

Skills training at the high school level offers three important benefits. It provides high school graduates immediately entering the workforce with skills that increase their likelihood of employment and entry into the middle class; it equips students pursuing four-year degrees business and technical acumen beyond what a four-year degree may offer; and it works to better align industry needs with the skills of an emerging workforce.

It should be viewed as an essential part of a well-rounded education, not as the ghost of a bygone era. 

Juliana Bush is the coordinator of Student and Policy Programs at the University of Virginia’s Miller Center. This content originally appeared on AME’s Target Online Magazine. Edited by Brittany Merchut, Project Manager, CFE Media, bmerchut(at)cfemedia.com. 



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
August 2018
Choosing an automation controller, Lean manufacturing
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me