Alcoa-Deschambault demonstrates overall leadership

Doing the right things right is perhaps the best description one can give to the maintenance operations at the Alcoa aluminum smelter in Deschambault, Quebec, Canada. By demonstrating superior performance in just about every area of evaluation, Alcoa-Deschambault earned the North American Maintenance Excellence (NAME) Award for 2002.


Alcoa-Deschambault profile

Doing the right things right is perhaps the best description one can give to the maintenance operations at the Alcoa aluminum smelter in Deschambault, Quebec, Canada. By demonstrating superior performance in just about every area of evaluation, Alcoa-Deschambault earned the North American Maintenance Excellence (NAME) Award for 2002.

Originally built as an Alumax plant, the smelter started pioneering before it started operations. In cooperation with the local school board, management developed a training program for the mechanical and electrical apprentices that were to become the maintenance workforce. This training was coupled with a 2-week training camp at another smelter, and in February 1992 the plant went on line with a maintenance team of about 60 apprentices — believed to be a first for an aluminum smelter startup.

Since that time, the plant has become part of Alcoa, and the maintenance group has grown to 155 employees characterized by their multicraft skills, enthusiasm, pride of ownership, and knowledge.

Alcoa-Deschambault has developed a reliability program that has become the model for other Alcoa smelters. Each maintenance team includes a Failure Analysis Team, or FAT, to improve overall effectiveness of its equipment. The FATs analyze and resolve recurrent equipment breakdowns to improve reliability. Each team includes a maintenance realiability engineer, electrician, mechanics, and operators.

NAME Award evaluators rated the maintenance planning and scheduling process as world-class. At the heart of the program are the maintenance tactic guides that have been developed for each piece of equipment. To develop these guides, teams analyzed what kind of maintenance (preventive, reactive, proactive, etc.) was the most applicable and economical for each piece of equipment. Thus, the appropriate type of maintenance is adapted to the needs of the equipment.

Another important initiative is the plant's kaisen approach to maximize reliability of bottleneck equipment. Equipment is designated a bottleneck when its operational availability is lower than or equal to the period of time it must operate to meet client demand. Dedicated teams have been formed to reduce bottleneck equipment problems. There are just three active bottleneck teams at any given time to prevent resources from being spread too thin. Each team addresses seven aspects to solving bottleneck problems:

  • Training

  • Communications

  • Visibility (special signage)

  • Material and tools

  • Methods and procedures

  • n Equipment maintenance

  • Management.

    • Work and parts connected with the bottleneck kaizen projects are given priority. Dedicated toolboxes with essential tools and spare parts are located near the equipment for rapid response.

      Throughout all of its maintenance operations, Alcoa-Deschambault has emphasized training, planning, scheduling, communication, and documentation. The efforts have paid off with a standard of excellence that serves as a model for other plants in the corporation.

      Alcoa-Deschambault profile

      Business: primary aluminum smelter

      Capacity: 240,000 metric tons of aluminum (design capacity 215,000 metric tons)

      Electric current: 333,000 Amp

      Employment: 550

      Operation: 24/7/365

      ISO 9002 and 14001 certified

      Maintenance organization:

Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
GAMS preview, 2018 Mid-Year Report, EAM and Safety
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
August 2018
Choosing an automation controller, Lean manufacturing
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me