AHR attendees are optimistic about new year

According to a recent survey of more than 1,000 AHR Expo exhibitors worldwide, nearly three-fourths of the total respondents expect a better year in 2012.

01/04/2012


The 2012 AHR Expo will be Jan. 23-25 in Chicago, with more than 1,900 exhibitors and an expected attendance of around 50,000 people. Photo courtesy: AHR ExpoManufacturers appear to be very optimistic about the economic outlook for the HVACR industry. According to a recent survey of more than 1,000 AHR Expo exhibitors worldwide, nearly three-fourths of the total respondents expect a better year in 2012.

The AHR survey found 82% of respondents expect sales to increase in 2012, with 29% anticipating increases of more than 10%. An additional 36% said sales would increase between 5% and 10%.

Ethan Hoberman, sales manager at Pridiom, said that following an anticipated 40% growth in 2011, the company is “expecting to double sales in 2012.”

This optimistic 2012 outlook may be due in part to the fact that 76% of the respondents believe there is pent-up industry demand for new products. “After several years of slow growth and sales, replacement/new equipment should start to grow as equipment becomes too old/obsolete/worn-out to be repaired,” Hoberman said. 

The 2012 AHR Expo will be Jan. 23-25 in Chicago, and 72% of the exhibitors plan on introducing new products at this year’s expo. “We anticipate 2012 will be a much better year, based on the industry-leading products we have launched in the last two years and what we will be launching in 2012,” said Don Winter, vice president of marketing, McQuay International.

Other major findings of the survey were:

  • The industry segments expecting the strongest demand for their products in 2012 are light commercial (24%), heavy commercial (13%), industrial (26%), residential (26%), and institutional (11%).

  • The industry categories expecting the strongest demand for products are new construction (37%), replacement (36%), and renovation/upgrade (26%).

“These survey results and the fact that this will be the largest AHR Expo in the showʼs 82-year history bodes well for the HVACR industry outlook,” said Clay Stevens, president of International Exposition Co., which produces and manages the AHR Expo. “Manufacturers know that their customers will finally need to replace their worn-out equipment with more energy-efficient technology so they have reserved exhibit space in record numbers to meet this demand.”

Information provided by AHR Expo.


2012 AHR Expo facts

When: January 23-25, 2012

Where: McCormick Place, Chicago

Who: More than 1,900 exhibitors are expected at this year's event. More than 50,000 people attended the 2011 event, making it one of the largest industrial trade shows in the U.S.

Sponsors: The American Society of Heating, Refrigerating and Air Conditioning Engineers (ASHRAE) and the Air-Conditioning, Heating and Refrigeration Institute (AHRI). The Heating, Refrigeration and Air-Conditioning Institute (HRAI) of Canada is an honorary sponsor.

Website: www.ahrexpo.com



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
October 2018
Tools vs. sensors, functional safety, compressor rental, an operational network of maintenance and safety
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
October 2018
2018 Product of the Year; Subsurface data methodologies; Digital twins; Well lifecycle data
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
October 2018
Complex upgrades for system integrators; Process control safety and compliance
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me