Advanced Manufacturing Center focused on five emerging trends

The Advanced Manufacturing Center's (AMC) presentation will focus on the five trends and technologies that are moving manufacturing forward like additive manufacturing and data-driven manufacturing.

08/18/2014


The Advanced Manufacturing Center's (AMC), presented by Gardner Business Media and titled, "Manufacturing's Solutions Network," will focus on the five trends and technologies that are moving manufacturing forward. Displays and presentations will explore presentations and topics on:

The additive manufacturing process that "grows" or "prints" functional parts through the process that adds one precise layer at a time. This technology makes it possible for manufacturers to economically produce complex components in quantities that would be too small to justify die or mold tooling or produce geometric features such as internal honeycomb structures or curving channels that would be impossible to create any other way. The display by Linear Mold & Engineering / Oak Ridge National Laboratory and the technical presentation by Greg Morris of GE Aviation will allow visitors to learn how to take advantage of the opportunities that additive manufacturing can provide.

Automation that increases the value of an individual employee rather than being a replacement by freeing this person to focus attention on the work that requires human knowledge or human judgment. The display and presentation is by Rethink Robotics—in partnership with Industrial Automation North America and Motion, Drives, Automation North America.

Automotive 2025 is intended to raise fuel economy standards to an equivalent of 54.5 mpg by 2025 for cars and trucks. A display incorporating a General Motors Silverado body and a presentation by Ron Krupitzer of the Steel Market Development will share insights on moving to structures that are strong, light, and capable.

The results of the fourth edition of Modern Machine Shop's Top Shops benchmarking survey. Results from this year's survey will be presented at the AMC with Top Shops Honors Program winners being announced for the survey's four main categories: machining equipment, shop floor practices, business strategy and human resources. Representatives from those four shops will be on hand to participate in a presentation, as well as a Q&A with visitors.

Data-driven manufacturing implies that decisions controlling the manufacturing process should be based on facts, not guesses, wishes, theories or opinions. An exhibit provided by ITAMCO "Google Glass & MTConnect"/XOEye and a presentation by Dean Bartles of the Digital Manufacturing & Design Innovation Institute will teach how emerging technology is enabling both people and equipment to collect and process the facts they need to achieve better results.

CFE Media will sponsor the 2014 Global Automation and Manufacturing Summit on Sept. 10 starting at 8:15 a.m. in Room W190 in the West Wing of McCormick Place.

To learn more about IMTS, the IMTS 2014 Conference, and to register, visit IMTS.com. Conversations within the IMTS community are going on at:

Twitter: https://twitter.com/IMTS_2014 or @IMTS_2014

LinkedIn: http://www.linkedin.com/groups/IMTS-2014 

Facebook: https://www.facebook.com/IMTS.show 



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
August 2018
Choosing an automation controller, Lean manufacturing
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me