Achieve and sustain organizational excellence at the AME 2011

Annual Excellence Inside International Conference expects 2,500 manufacturing practitioners to gain insights from keynote speakers, share best practices, network, Oct. 24-28, 2011, in Dallas, TX.

07/01/2011


With the economic recovery phase underway and the unemployment rate slowly decreasing, companies—especially those in the manufacturing sector—must continually strive to find new ways to achieve and sustain organizational excellence during this critical time. Attendees of the 2011 Annual Excellence Inside International Conference, hosted by the Association for Manufacturing Excellence (AME), will find new opportunities to master the enterprise excellence journey.

From October 24-28, 2011, an expected 2,500 manufacturing practitioners from around the world will gather in Dallas, TX to gain insights from keynote speakers, share best practices with other professionals, explore world-class facilities and network.

The conference will boast eight inspiring keynote speakers:

  • Temple Grandin, Ph.D.; Professor of Animal Sciences, Colorado State University; New York Times Bestselling Author; and one of Time magazine’s 2010 “The 100 Most Influential People in the World”
  • Mike Rother; Bestselling author; and engineer, researcher and teacher affiliated with the University of Michigan, the Industrial Technology Institute, the Fraunhofer Institute and the Technical University Dortmund
  • Charles “Gus” Whalen, Jr. ; Chairman of The Warren Featherbone Company
  • Gregory Hall; Senior Vice President of Technical Operations at FedEx Express
  • Gary Convis; Consultant to Dana Holding Corporation
  • Sarah Patterson; Executive Vice President and Chief Operating Officer at Virginia Mason Medical Center
  • James Womack, Ph.D.; Founder of and Senior Advisor to the Lean Enterprise Institute, Inc.
  • Robyn Benincasa; Professional adventure racer, firefighter and teamwork-building extraordinaire who inspires people to become high-performance leaders

During 40 workshops, 60 presentations and 10 special interest sessions, conference attendees will have countless networking and best practice sharing opportunities. . From “Mastering Lean Product Development” and “Sustainability Unplugged,” to “Lean Accounting” and “Value Stream Mapping,” the AME conference features dozens of learning opportunities for professionals of all levels, in any industry.

According to AME members, facility tours are a prime way to learn first-hand how companies achieve and sustain operational excellence. This year, conference attendees will have the option to take part in any of 40 scheduled tours, including major medical device, food, transportation and health care manufacturers.

The conference will also include an exhibition hall, with more than 60 exhibitors, showcasing practical Lean knowledge-based product and service solutions. These exhibitors will enrich the conference experience with the tools and resources to help organizations eliminate waste and improve effectiveness.

www.ame.org

The Association for Manufacturing Excellence

- Edited by Gust Gianos, Plant Engineering, www.plantengineering.com



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2017 Top Plant.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
March 2018
SCCR, 2018 Maintenance study, and VFDs in a washdown environment.
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
December 2017
Product of the Year winners, Pattern recognition, Engineering analytics, Revitalize older pump installations
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
April 2018
Implementing a DCS, stepper motors, intelligent motion control, remote monitoring of irrigation systems
February 2018
Setting internal automation standards

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Maintenance & Safety
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
Industrial Analytics
This digital report explains how plant engineers and subject matter experts (SME) need support for time series data and its many challenges.
IIoT: Operations & IT
This digital report will explore several aspects of how IIoT will transform manufacturing in the coming years.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me