Access control equipment market for US Government sector poised to grow again this year

IMS Research reports that the market for access control equipment is expected to grow 3.5% in 2013 because of increased demand for identification and verification equipment and upgrades to existing infrastructure.

09/11/2013


Despite spending cuts from a sequestered budget and a still-recovering economy, suppliers of innovative, high-security access control solutions to the U.S. government can expect modest growth this year, according to a new report entitled “The World Market for Electronic Physical Access Control Equipment – 2013 Edition” from IMS Research, now part of IHS Inc. 

The market in 2013 for access control equipment intended for the U.S. government sector is projected to reach approximately $198 million, up from $191 million in 2012. This year’s anticipated growth of 3.5% actually improves on the 1.8% expansion enjoyed last year, based on 2011 revenue levels of $188 million. 

“The implications of Homeland Security Presidential Directive 12—or HSPD 12—which mandates a standard for a secure and reliable form of identification to be used by all federal employees and contractors, continues to resonate through the access control industry, particularly for the private sector,” said Blake Kozak, senior analyst for access control, fire and security at IHS. 

“Comparable to Personal Identity Verification (PIV) cards, Commercial Identity Verification (CIV) cards continue to gain interest in the private sector. But while CIV credential specifications are technically compatible with those of PIV-I—both of which were designed to take advantage of the infrastructure of the PIV program—a CIV credential issuer does not need to comply with the strict policy framework associated with issuance and use of both PIV and PIV-I credentials. These cards are specifically to be used for organizations that want greater internal identity and access control, which is based on PIV technology.” 

More directly related to government applications is the recent update of Federal Information Processing Standard Publication (FIPS) 201 to FIPS 201-2, which demotes the Cardholder Unique Identifier (CHUD) as an authentication device. This will help to drive the market for high-assurance readers in the government space, although the rollout time frame currently remains unknown. But even if CHUD readers will more accurately verify identity, that market is expected to remain in its infancy because of the higher price point of the readers, at least in the short term. 

Finally, other government programs such as Global Entry could also help drive growth for access control technologies like biometrics. Global Entry is a U.S. Customs and Border Protection (CBP) program that allows expedited clearance for preapproved, low-risk travelers upon arrival in the United States. Historically, only fingerprinting has been used for this program, but discussions have taken place on expanding the hardware to include iris and facial recognition. If iris and facial recognition are used in this application, more private--as well as less secure—locations may also decide to adopt the technology. 

Moving forward, the U.S government is expected to continue adopting new technology and to update its policies in order to protect critical infrastructure, despite budget cuts. For their part, security solutions at high-risk locations will need to continue to evolve in the digital era with other technologies to avoid security leaks that make networks vulnerable to malicious activity.

In their aim to create a more secure and seamless network, governments around the world have begun to ramp up security protocols and integration with transportation. It is only a matter of time, then, before private-sector organizations follow suit.  

“The World Market for Electronic Physical Access Control Equipment – 2013 Edition, in its seventh edition, featuring more than 300 tables and figures and 115 pages of qualitative analysis. The report includes unit shipments, average sales prices and revenues estimated for 2012 and forecast through 2017. The market is segmented by country, product type and sales channel. It is an essential tool for executives assessing or seeking an in-depth understanding of this market.



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2017 Top Plant.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
March 2018
SCCR, 2018 Maintenance study, and VFDs in a washdown environment.
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
December 2017
Product of the Year winners, Pattern recognition, Engineering analytics, Revitalize older pump installations
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
April 2018
Implementing a DCS, stepper motors, intelligent motion control, remote monitoring of irrigation systems
February 2018
Setting internal automation standards

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Maintenance & Safety
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
Industrial Analytics
This digital report explains how plant engineers and subject matter experts (SME) need support for time series data and its many challenges.
IIoT: Operations & IT
This digital report will explore several aspects of how IIoT will transform manufacturing in the coming years.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me