A 'triple win' on energy management

GM's energy reduction effort delivers profits and cuts costs while helping the environment

04/15/2013


GM's energy reduction effort delivers profits and cuts costs while helping the environment. Courtesy: General MotorsA two-year effort by General Motors to meet the U.S. EPA’s Energy Star Challenge for Industry has allowed the global automaker to cut its energy intensity by 26% across 54 facilities worldwide. For GM’s energy manager, the results can be measured both inside and outside a GM plant.

“Energy management saves money and reduces the greenhouse gases, and it also improves our maintenance practices. It’s a triple-win,” said Al Hildreth, who leads the U.S. effort on energy for the Detroit automaker. “The beautiful part is that the money I save is pure profit, but I don’t have to do a trade-off. What makes this fun is that I can help the business and help the environment.”

The voluntary Energy Star program has helped focus the GM effort on both energy use reduction and the corresponding drop in costs. GM has saved more than $90 million in energy costs, more than four times the annual budget for energy management within GM’s U.S. operation.

It’s a cooperative, coordinated effort that includes GM’s manufacturing facilities around the world, as well as benchmarking with other global automakers to see what best practices are in place.

The effort to better manage energy costs at GM has been underway over the past 20 years. Now GM manages energy as it does other business units within the organization. “We manage safe, quality, and materials costs. That’s all part of our business plan. Now we include energy in that,” said Hildreth. “It’s not just a one-time event. It’s really a continuous process. We’re now able to measure energy produced per vehicle manufactured.”

For a company that annually spends $1 billion on energy to run its facilities and make cars, a reduction in energy spending that doesn’t impact production is a significant profit generator. The company has attacked many basic areas—improving lighting controls, managing HVAC systems to handle peak loads, and repairing and improving compressed air usage. Now GM wants to attack process energy to continue the cost reduction.

“Our paint shop is a major energy user,” Hildreth said. “Some of our paint systems are newer, some are legacy systems. As we start to do upgrades and retrofits, we’re seeing significant savings in these areas.”

Another area that GM has addressed is the move toward more renewable energy and less dependence on carbon-based fuels. Hildreth said GM is the leading user of solar energy among U.S. automakers, and it will eliminate coal as a fuel to make steam by 2015.

There is a significant change in the way energy is treated in a manufacturing plant. The days of blindly paying invoices for gas, electricity, and steam generation are over. Energy is now seen as a raw material that can be measured, managed— and wasted. While Energy Star recognitions are nice, the realization that wasted energy is wasted money is driving energy improvements in manufacturing today.

And as Hildreth knows, it takes a commitment from management to provide the support to make those changes. “It does take a commitment from management,” he said. “We’re pretty fortunate. I get a $20 million budget to spend on energy efficiency. We run it as a business—we get a budget, we spend the budget, and we get good results.”

“The job is always to always keep on top of things,” Hildreth added. “We’re continuously monitoring the processes. It is a continuous process.”



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
August 2018
Choosing an automation controller, Lean manufacturing
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me