A review of China’s machinery production for 2010, 2011

Machinery production for China in 2010 was strong, growing by 28.2%. 2011 saw a strong start in the beginning of the year before dropping in the final six months to 17%.

02/20/2012


In 2009, the Chinese Government implemented stimulus policies to maintain economic growth and expand domestic demand. They have led the machinery industry to a recovery from the second half of 2009.

In 2010, China has surpassed Japan in terms of nominal GDP, becoming the world’s second largest economy. Meanwhile, as the economy recovered and as many delayed orders released, China's industrial economy bounced back strongly. Its machinery production grew 28.2% to $285.9 billion, higher than the levels of preceding years.

For Chinese machinery production, the material handling machinery was estimated to be the largest sector by value, accounting for 20.1% of total revenues in 2010. The next largest sector was agricultural machinery, with 13.4%. The machine tool sector was third, with 8.8%. Production of semiconductor and robotics machinery remains limited in China. Because of the strict regulations that took effect in the wind-turbine industry in 2011, this sector contracted for the first time.

2011 was the first year of the “12th Five-year Plan”. In the first half of 2011, China’s machinery production maintained the rapid growth of 2010. As you all know, Chinese machinery industry is closely related to investment, export and consumption; and all three factors did not go well in the second half.  

  1. Investment: Fixed-asset investments accounted for more than 50% of China’s GDP in 2010.Government fixed-asset investments grew rapidly in 2009 and 2010. With persistent inflation, the Chinese Government didn’t introduce follow-up stimulus policies in 2011. 
  2. Exports: The spreading debt crisis in Europe and a fragile US recovery still affect China's exports of machinery. Most machine builders felt export orders fell a lot at the end of 2011. The growth of China's machinery exports will slow this year because of the weakening global economy and increasing protectionism in developed countries. 
  3. Consumption: Although Chinese Government wants to increase workers’ wages, it still has a long way to go. Because of high inflation, price increases have reduced personal disposable income. Domestic consumption is still puny.

Consequently, as machine buyers are uncertain whether they should purchase more machines for the future, demand for machinery is slowing down. As a result, the machinery production growth rate in 2011 came down gradually to 17.0%, with output reaching $334.6 billion. Moreover, the growth rate of China’s machinery production is projected to continue to fall steadily in 2012.

Profile photo of Jay Tang, an analyst for IMS Research. Courtesy: IMS ResearchGoing forward, the Chinese Government is promoting transformation and upgrade in the 12th “Five-year Plan”. China will focus not only on how fast the economy grows, but also on the quality of that growth. We project the growth rate of machine production to fall further in the next five years, but remain at around the 13% mark. By 2016, we predict that machinery production in China will reach well over $600 billion.

As part of the Machinery Production Yearbook programme, IMS Research produces China’s machinery production yearbook yearly. The data is from “Machinery Production Yearbook-China-2012 Edition”.



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
GAMS preview, 2018 Mid-Year Report, EAM and Safety
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
Choosing an automation controller, Lean manufacturing
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me