A model training resource

On most plants, a dedicated training department is something on the wish list. At R.J. Reynolds Tobacco Company's (RJRT) manufacturing facility in Tobaccoville, NC, it's a reality. In fact, it could be considered a model. Here's why. "At RJRT, learning is seen as a process not a project," says Sharon Robertson manager of Operations Technical Training (OTT).

08/01/2001


On most plants, a dedicated training department is something on the wish list. At R.J. Reynolds Tobacco Company's (RJRT) manufacturing facility in Tobaccoville, NC, it's a reality. In fact, it could be considered a model. Here's why.

"At RJRT, learning is seen as a process not a project," says Sharon Robertson manager of Operations Technical Training (OTT). "Our goal is to provide superior quality training that ensures students know how to correctly perform their duties in a safe manner, requires the student to demonstrate the retention of knowledge, provides these services when our customers need them, and does so in the most cost-effective manner possible."

And the cost is considerable with a staff of 47 people and a 42,000-sq ft training center. Over the years, RJRT has invested a tremendous amount of resources in operation cost and equipment for the training center. Classes are taught on the same equipment used in the manufacturing plants.

To accomplish its goal, OTT provides 183 courses and other training services in these areas:

  • Electronics & instrumentation

  • Basic craft skills

  • Electrical

  • Mechanical

  • Operative

  • Industrial vehicles

  • Team leader & train-the-trainer workshops

  • Technical documentation

  • Job analysis

  • Development of technical courses.

    • During its 32 yr of operation, OTT has reached some significant performance goals. Among them:

      • Courses are competency based with validated skill retention checks included to ensure that transfer of knowledge has occurred.

      • Courses are designed to provide 70% hands-on activities and no more than 30% theory, which OTT believes to be the most effective way to deliver technical instruction.

      • For each job, courses are structured in a training path and must be taken in a specified order with each course building upon the skill learned in the previous course.

      • All jobs have specific training paths, and employees know what they are required to learn in order to complete qualification for a given job.

      • A Personnel Administration System (PAS) captures each employee's training history and what classes they require for their current position. Classes are also scheduled through the PAS system.

      • OTT has partnered with two local community colleges to develop two mechanical certificate programs that are taught on their campuses. These mechanical certificate programs are available to current and future employees that wish to become eligible for RJRT's mechanical apprenticeship program.

        • On average, OTT provides more than 1500 classes and 5600 days of instruction to about 2400 people each year.

          Now, the reach of the Operations Technical Training department is reaching even further. It has teamed with other departments at RJRT to form a "Corporate Learning Center" that can be accessed through the company intranet by all employees.

          As might be expected, OTT frequently receives requests to develop new training programs, Robertson says. "However, the first step that must be taken is to conduct a training-needs analysis. This is a critical step and, frequently, the one most overlooked in many organizations. Training professionals have to constantly remind themselves that training is not always the answer to a problem," she cautions.

          RJRT's commitment to superior training is clearly evident through the work of OTT. The benefits this department provide to both employees and the company played a significant part in Reynolds Tobacco being recognized as one of the "100 Best Companies to Work For" in 2000 by Fortune



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
GAMS preview, 2018 Mid-Year Report, EAM and Safety
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
Choosing an automation controller, Lean manufacturing
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me