77% of US mission critical license holders would like mobile broadband

Mobile broadband networks are something mission critical users would like to have, according to a survey, but less than a fifth of those polled view it as an essential feature.

08/17/2011


Next to narrowbanding, the biggest issue in the North American licensed mobile radio market over the next few years will be the demand for private LTE networks for mission-critical communication users. Much has been written about the issues relating to spectrum allocation and funding for these new networks, but what about the actual demand from users?

IMS Research will be exploring this fully in its upcoming report “Broadband LMR/PMR - World – 2011”; however, a recent survey of around 400 US license holders gave us some early insight into the use of data at present and what the pent up demand is for more advanced data services. This blog explores some of the results from this survey.

The positive news is that there does appear to be a large amount of pent up demand for mobile broadband data services. When asked about the importance of mobile broadband as a feature of a mission critical communication network, 77% of mission critical radio license holders indicated that this was a feature that they’d like to have. The slightly worrying issue for the industry though was that only 19% stated that is was an “essential” feature. For most it was viewed as a “nice to have” feature. This does beg the question, how much extra would these license holders be prepared to pay for just a “nice to have” feature? 

Figure 1: Graph polling importance of

The use of mobile data within this user group is already relatively widespread. 69% of public safety license holders from our survey indicated that they were already using mobile data services.

Figure 2: Graph of mission-critical LMR license holders that currently use mobile data. Courtesy: IMS Research

However, for more than half of the respondents this was accomplished not with the LMR network, but by using a commercial cellular service. In some cases the respondent used the LMR network for some data services, but switched to cellular for others when the LMR networks capabilities were insufficient. 

Figure 3: Graph showing what devices are used to access data services. Courtesy: IMS Research

The data applications currently used by respondents tended to be those that did not demand high-speed data. For example only 8% used real-time video services. Applications such as access to email, remote access to databases, location and image transfer were the most common. However, the reason the real-time video wasn’t used appeared to be down to network performance. If network performance was good enough and the application well enough integrated into the wider communication network, 39% of public safety respondents indicated that real-time video would be an application they would use.  A positive result for those proponents of LTE for mission critical communications!

But what about just using the commercial cellular networks then? If there is this demand for mobile broadband and companies such as Verizon, AT+T and Sprint are going to roll our LTE, would these license holders not just use these networks? Why do they need private networks? The survey answered these questions to some extent, but they will be explored further in an upcoming report from IMS Research that focuses specifically on the demand for Broadband LMR/PMR (for more info please click here). In terms of this survey’s respondents, 59% of public safety users were already using commercial cellular services. At first perhaps a worrying stat for the industry. But when explored further the news was more positive. Although commercial cellular use was high, 86% stated that they could never completely replace their LMR network with a commercial cellular service. It would appear that in many cases the respondents were using the commercial networks for data purely as there was no other option.  

Figure 4: Graph comparing LMR versus cellular, reliability perceptions, and public safety versus non-public safety. IMS Research

IMS Research will be publishing a new report examining the demand and future market for broadband mission critical communication, for more information on this report, including information on pre-publication discounts, please click here.



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
April 2018
Implementing a DCS, stepper motors, intelligent motion control, remote monitoring of irrigation systems
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
Maintenance & Safety
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me