5S: A process for your business

5S is a thought process designed to resolve a type of problem that occurs throughout your business. Apply that seemingly simple tool accordingly and you'll be surprised by all the costly clutter that you can eliminate.

03/14/2016


5S is a thought process designed to resolve a type of problem that occurs throughout your business. Apply that seemingly simple tool accordingly and you'll be surprised by all the costly clutter that you can eliminate. Courtesy: CFE MediaHave you ever considered taking your 5S broom to your entire business?

Most people consider 5S an entry-level lean tool for the shop floor. They can tell you what each of the five S's is and too often suggest that the bottom line is "a place for everything and everything in its place." They lay down yellow tape to outline where the trash can goes, create shadow boards for tools, and issue monthly trophies. None of that is inherently bad, but the concept behind 5S is so much more than that.

Why settle for 5 percent of the power of 5S thinking?

Like most lean tools, 5S is a concept designed to eliminate waste. Costly clutter exists far beyond the shop floor; in fact, it exists in every aspect of even the best organizations.

Have you 5S'd your customer base? What about your products, and the components that go into your products? Over time those things get just as cluttered as the shop floor, and they can certainly benefit by applying 5S thinking to them as well.

Just as some people want to hang on to tools that haven't been used in years, so too do many companies hang on to customers that simply do not make sense for the business any longer. Get rid of them. They sap valuable resources better used elsewhere.

The same is true for product offerings. It takes resources to support products that long ago lost their market luster. Additionally, too many choices can make it hard for your customer to find just what they're looking for. For many companies Life Cycle Management is about birthing products, failing to ever kill them.

One client had over 50 different switches in use to accomplish the same function in very similar products. They have reduced that to less than 10 now, and haven't given up. Modular design can improve this problems immensely, but so can applying 5S thinking to your existing designs and part numbers.

Some of your suppliers are partners, focused on mutual benefit with you. A quick look at your supplier lists will undoubtedly reveal companies you shouldn't be doing business with any longer. They can't help you succeed and aren't interested in your help in improving their capabilities. Why are they still on your list?

And just as on the shop floor, 5S thinking for your business has to become a way of being—not an annual event.

5S is a thought process designed to resolve a type of problem that occurs throughout your business. Apply that seemingly simple tool accordingly and you'll be surprised by all the costly clutter that you can eliminate.

- Rebecca Morgan is an author for the Association for Manufacturing Excellence (AME). This article originally appeared on www.ame.org. AME is a CFE Media content partner. Edited by Erin Dunne, production coordinator, CFE Media, edunne@cfemedia.com 



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
October 2018
Tools vs. sensors, functional safety, compressor rental, an operational network of maintenance and safety
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
October 2018
2018 Product of the Year; Subsurface data methodologies; Digital twins; Well lifecycle data
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
October 2018
Complex upgrades for system integrators; Process control safety and compliance
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me