4SIGHT helps facilities capitalize on productivity using real-time data

Yard and Dock Management System integrates intelligent software with simple interface, uniting gaps between industrial warehousing, transportation

01/18/2011


4SIGHT Yard and Dock Management System takes your operation to the next level by integrating your facility with intelligent software to monitor, schedule, and communicate trailer movement, load assignment, and loading dock status in a simple, easy-to-use interface.4Sight Yard-Dock Management System

4SIGHT bridges the gap between warehousing and transportation, thereby alleviating common logistics problems. This system combines RFID, GPS and sensor technologies to provide companies with real-time yard and loading dock visibility, enabling them to improve trailer coordination and turn time management. The robust event-management capabilities and alert notifications reportedly help reduce the labor associated with moving and managing yard assets.

The 4SIGHT solution offers full automation, visibility and optimization from the time a vehicle approaches the inbound gate, throughout dock activity and trailer movement around the yard, to the time a vehicle leaves through the outbound gate.

Components of 4SIGHT include:

  • Graphic Interface of the yard and loading dock provides color-coded, exact location mapping and activity display.
  • Gate Management provides visibility of inbound and outbound equipment.
  • Load Assignment and Dock Door Scheduling allows managers to assign loads to specific trailers and optimize dock door usage.
  • Productivity and Activity Reports provide data on the utilization of trailers, dock doors, equipment status, switchers, etc.

In addition to its productivity tools, 4SIGHT also allows facilities to maintain their loading dock equipment based on actual usage as opposed to a traditional time-based maintenance schedule. Dock usage data is collected and displayed, and the system automatically identifies loading docks that reach a usage threshold. Once the threshold has been reached, an automated email will be sent to service providers and maintenance managers, and affected doors can be locked out for maintenance. 4SIGHT also includes a value-added benefit of increased security around the loading dock area, incorporating security cameras and built-in sensors to identify unauthorized dock door or trailer movement.

http://www.4frontes.com/

4 Front Engineered Solutions



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
March 2018
SCCR, 2018 Maintenance study, and VFDs in a washdown environment.
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
April 2018
Implementing a DCS, stepper motors, intelligent motion control, remote monitoring of irrigation systems
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Maintenance & Safety
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
Industrial Analytics
This digital report explains how plant engineers and subject matter experts (SME) need support for time series data and its many challenges.
IIoT: Operations & IT
This digital report will explore several aspects of how IIoT will transform manufacturing in the coming years.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me