4 levels of asset reliability at steelmaker ArcelorMittal

Effective planning leads to effective maintenance, which ArcelorMittal learned during the economic downturn

10/29/2013


In building its World Class Equipment Reliability System at global steelmaker ArcelorMittal, USA maintenance division manager Scott Piech noted that the company had to teach some old dogs some new tricks.

“There was a lot of winning over folks who were doing things a certain way for a lot of years,” said Piech at the 2013 Bentley Systems Year In Infrastructure event in London on Oct. 29. “It takes a lot of coaching to convince them that it’s the right thing to do.”

Overcoming worker skepticism and a recession that slowed the process, the message seems to have taken hold. ArcelorMittal was one of three finalists for the Bentley award in Asset Performance Management.

Changing management always is a challenge, and it was for this company as well. “We thought the journey of going from reactive maintenance to proactive maintenance would take three to five years. It’s going to take seven to 10 years,” Piech said. The 2008 recession slowed their efforts to convert all U.S. plants to the WCER System, and the effort was streamlined to focus on critical areas.

“When we started the program,” Piech said, “the market for steel was red-hot. Tried to implement in all departments, but then the downturn hit and we didn’t have the resources. We just couldn’t do it for everything, so we focused on critical areas within the plants.” 

Piech said there were four primary levels of reliability at ArcelorMittal:

  • Planning and scheduling
  • Autonomous maintenance
  • Pareto and root cause failure analysis (RCFA)
  • Proactive maintenance  

While all were important, planning and schedule were the keys, especially in the retraining effort. “Planning and scheduling is the backbone of what you do,” said Piech. “If you’re not doing effective planning and scheduling, you’re not really doing good maintenance. We trained everyone at our USA plants to do this.

“Now have operators doing inspections. We were trying to get rid of that old idea where operators operate and maintainers maintain. We want everyone to own the equipment.”

They also rerouted maintenance workers from predictable routes to ones based on the analysis of data through the Bentley Ivara system. While some workers migrated to work orders through handheld or tablet devices, others continued to use paper. While the system didn’t require a preference, Piech has seen an uptick with tablet use lately. “When workers are going to be doing their inspection routes, the information can be downloaded to the tablets.”

Piech made several other key points:

  • There is a manager for proactive maintenance separate from a manager for planning and for corrective maintenance. “Firefighting always seems to come first, especially in maintenance,” he said.
  • The company knows some of its maintenance personnel have upwards of 30 years of experience. That experience will be retiring soon. “The people we hire as maintenance personnel will require a lot of training,” he said. That’s why standardizing training, maintenance and metrics was so important to the overall rollout of the WCER System at ArcelorMittal.
  • And as in most cases, good maintenance often goes overlooked. Maintenance only becomes visible when something breaks. “If you’re doing great maintenance, you’re there to support production,” Piech said.


Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
August 2018
Choosing an automation controller, Lean manufacturing
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me