2013 Product of the Year finalists: Safety

Finalists in the Safety category for the Plant Engineering 2013 Product of the Year competition.


Plant Engineering 2013 Product of the Year finalist: Liquiphant FLT8x, Endress+HauserLiquid level switch

The Liquiphant FLT8x level switch features a fail-safe design and high reliability for monitoring minimum and maximum liquid levels in safety applications up to SIL3. The FTL8x series of point level switches have two relay outputs, a 4 to 20 mA output that connects to a fail-safe switching unit with a two-channel output, safety contacts, and a safety locking function. For high reliability, built-in diagnostics monitor the tuning fork-type sensor for damage, corrosion, material buildup, and mechanical blocking. If a problem occurs, the live signal changes to notify the operator, and a fault relay sends a signal switch to an annunciator or PLC.


Plant Engineering 2013 Product of the Year finalist: Miller AirCore, Honeywell Safety ProductsHarness with aluminum hardware

The Miller AirCore harness is available with lightweight, corrosion-resistant aluminum hardware to provide superior performance and comfort. The aluminum materials and components are designed to reduce fatigue for all-day endurance and increased productivity. The breathable, open-core padding technology provides optimal airflow while reducing heat and moisture entrapment, keeping a worker drier and cooler. The AirCore harness is designed with patented Miller DuraFlex stretchable webbing that provides greater flexibility and increased comfort. The unique cam buckles on the shoulder straps allow for easy vertical webbing adjustments, and the webbing design creates an original and vibrant style for greater visibility.

Honeywell Safety Products

Plant Engineering 2013 Product of the Year finalist: Miller AirCore, Honeywell Safety ProductsOverhead rotational boom anchor

The unique design of the Miller SkyORB overhead rotational boom anchor utilizes the weight of the vehicle being loaded, unloaded, or serviced as a counterweight to provide a safe overhead anchorage point. The unit features a 20-ft long telescoping mast and a boom that rotates 360 degrees, allowing it to be easily positioned above a worker’s head to minimize free-fall distance and swing fall when used with a self-retracting lifeline. In addition, its patented energy-absorbing technology reduces forces on the system. The Miller SkyORB anchor is designed for use with elevated platforms ranging from 6 to 14 ft above the ground and provides a working radius of up to 14 ft.

Honeywell Safety Products

Plant Engineering 2013 Product of the Year finalist: PAC vest, ITW VortecAir conditioning vest

The re-designed and re-engineered Personal Air Conditioning (PAC) vest is an innovative solution to protect industrial workers in extreme temperature environments. Key design enhancements include an integrated belt with a heat-resistant Nexus belt buckle and an adjustable waist belt that provides a quick connection to cool or warm air with the Dual Action PAC switching quickly from hot to cold. The lightweight vest can be worn under other protective clothing and can be adjusted easily by the user, even with gloved hands. The PAC vest is available in three sizes to accommodate a range of body types.

ITW Vortec

Plant Engineering 2013 Product of the Year finalist: Jackson Safety Hard Hat Interchange System, Kimberly-Clark ProfessionalHard hat interchange system

The Jackson Safety Hard Hat Interchange System allows users to easily add, remove, or switch between their welding helmet and face shield, all without removing their hard hat. This system keeps workers protected continuously to help reduce injuries and maintain compliance. It works by touch only, so there is no need to remove the hat as the user changes his or her personal protective equipment (PPE). The vertical lock-in function on the Hard Hat Interchange System eliminates helmet/face shield creep. The easy-to-use system keeps productivity up and keeps workers compliant with ANSI Z87.1-2010 standards while reducing inventory of various parts and pieces.

Kimberly-Clark Professional

Plant Engineering 2013 Product of the Year finalist: Jackson Safety Balder W-70 BH3 ADF, Kimberly-Clark ProfessionalWelding helmet

The Jackson Safety Balder W-70 BH3 ADF welding helmet provides a uniform shade level over the entire viewing area without noticeable and annoying brightening at the edges of the filter, which creates a murky and hazy weld pool. The proprietary technology of the W-70 BH3 decreases angular dependence to virtually undetectable levels, increasing welder comfort and productivity. The 1.24-lb helmet meets the ANSI Z87.1 high impact 2010 standards and is solar-powered. The W-70 BH3 offers better protection of the face, ears, and throat, and an aerodynamic shell designed for better fume deflection.

Kimberly-Clark Professional

Plant Engineering 2013 Product of the Year finalist: Safe-Lite, Liftow LimitedPedestrian warning spotlight

The Safe-Lite is a pedestrian warning spotlight that alerts workers of forklifts approaching blind corners or forklifts entering and exiting trailers. The blue LED light projects an intense spotlight 10 to 20 ft ahead of the forklift to alert the pedestrian of nearby traffic. The Safe-Lite can be installed on the front or back of any forklift, sweeper, or any other piece of industrial equipment. The spotlight has two LED lights and lenses to ensure a visible blue spot on the floor. The Safe-Lite has a 50,000-hr LED life rating, a 140-degree swivel mounting bracket, and an 8-ft cable length with clips.

Liftow Limited

Plant Engineering 2013 Product of the Year finalist: PIG 5-gal Latching Pail Lid, New Pig CorporationLatching pail lid

The PIG 5-gal Latching Pail Lid is designed to fit both steel and poly 5-gal pails. The durable, powder-coated steel lid easily opens and closes with a single latching hasp. A reinforced hinge, latching mechanism, and nitrile gasket create a tight seal around the lid, helping to keep pail contents pure and decrease vapor emissions. The fast-latch ring makes installation easy on steel or poly open-headed 5-gal pails with an 11.25-in. inside diameter. The Latching Pail Lid helps users comply with 40 CFR 261.4, which requires excluded solvent contaminated wipes to be accumulated and stored in closed containers while they are managed on-site.

New Pig Corporation

Plant Engineering 2013 Product of the Year finalist: Ultra-Ever Dry, UltraTech InternationalSuperhydrophobic, oleophobic coating

Ultra-Ever Dry is a superhydrophobic (water) and oleophobic (hydrocarbon) coating that completely repels any liquid. It uses proprietary nanotechnology to coat an object and create a barrier of air on its surface. This coating can be used for various applications, such as to prevent wetting, corrosion, icing, and contamination, and for self-cleaning and extending product life. The two-part spray-on coating can be applied with a compressor/air sprayer or, for smaller applications, with available pump or trigger sprayers. Ultra-Ever Dry can be used on various materials, such as steel, aluminum, other metals, plastic, leather, fabric, wood, and concrete.

UltraTech International

Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
October 2018
Tools vs. sensors, functional safety, compressor rental, an operational network of maintenance and safety
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
GAMS preview, 2018 Mid-Year Report, EAM and Safety
October 2018
2018 Product of the Year; Subsurface data methodologies; Digital twins; Well lifecycle data
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
October 2018
Complex upgrades for system integrators; Process control safety and compliance
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me