2011 Product of the Year features early entry discount

Entries now open to honor innovation with 24th annual Product of the Year contest

05/09/2011


There is no deadline for innovation, but there is a deadline to share your innovative new products in manufacturing with the world. And this year, there are two deadlines.

The 24th annual Plant Engineering Product of the Year entries are now being accepted at www.PlantEngineering.com. The most sought-after honor by manufacturing suppliers, Product of the Year is unique in the industry because Plant Engineering’s global readers vote on the Product of the Year award winners from entries received. Winners will be announced at the 2012 Manufacturing/Automation Summit next March in Chicago, and in the April issue of Plant Engineering magazine, as well as online.

All entries must be submitted online. In 2011, the Product of the Year entry deadline is Friday, September 12 at 5 p.m. CST, and entry fees are $395. For the first time, 2011 will feature an early entry opportunity, and a $100 discount on entry fees. All submissions received before June 30, 2011 will be able to enter for just $295.

“We think this second deadline will be attractive to those companies who may have new products coming out now but who may forget to enter them when the September deadline draws closer,” said Plant Engineering content manager Bob Vavra. “It also creates an incentive for early entry for any of the products. We will be reporting on this new entry progress as the summer goes along.”

The other rules for Product of the Year remain the same. An eligible product must have been introduced in the U.S. market between Oct. 1 2010 and Sept. 30, 2011. It must be substantially new; next-generation entries of past products must demonstrate how the product is significantly different than past versions. There are 18 categories of product entries, and companies may enter as many eligible products as they would like in any category.

Once the finalists have been determined from the entries and announced in the November issue of Plant Engineering, eligible Plant Engineering readers (those with buy-specify authority, as determined by their subscription card) will be sent an electronic voting form. Those votes will be tabulated, and winners informed in early January.

The product that receives the single highest vote total in all categories will received the coveted Product of the Year Grand Award, won in 2010 by Zoneworks.

For more information about Product of the Year, call content manager Bob Vavra at (630) 571-4070, ext. 2212 or email him at bvavra@cfemedia.com.

www.plantengineering.com Plant Engineering



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
April 2018
Implementing a DCS, stepper motors, intelligent motion control, remote monitoring of irrigation systems
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
Maintenance & Safety
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me