1Q12 UPS service revenues down 1% year-over-year

Revenues from the sale of UPS services in the first quarter of 2012 are roughly 1% less than in the same period last year.

06/21/2012


Revenues from the sale of uninterruptible power supply (UPS) services in the first quarter of 2012 are roughly one percent less than in the same period last year. IMS Research, recently acquired by IHS Inc., has been tracking quarterly changes in this market since 2009. Over the years, the first quarter has proven to be seasonally slow, but never has it shown negative growth year-over-year.

The UPS service market includes service contracts, warranties, installation, battery replacements and preventive maintenance on UPS hardware. Growth trends in the UPS service market closely follow those seen in the UPS hardware market, which, according to IMS Research’s UPS hardware tracker, slowed down in the fourth quarter of 2011 and slowed down further in the first quarter of 2012.

Service revenues tend to lag hardware revenues by roughly a year. For example, while UPS hardware revenue growth slowed in 2008, service revenues continued to grow strongly until 2009, when the service market finally felt the effects of decreased hardware sales. The lag is attributed to the nature of service contracts, which are typically attached to UPS 12-18 months after sale of the UPS itself. Given that contracts account for roughly half of the total market, the effect is significant.

UPS Service vs. UPS Hardware Revenue Growth. Source: IMS Research

The outlook for the global market may not be so dim given that much of the decline is confined to Europe, whose economy continues to struggle. The weakening of the Euro against the dollar inflated the decline year-over-year for that region, since revenues are aggregated in US dollars. The Americas has a slightly better picture with positive growth year-over-year in Q1. Asia showed the greatest percentage increase year-over-year of the three major regions, as tends to be the case with most markets for data center infrastructure that IMS Research tracks. Liz Cruz, the analyst for this market, suggests that “much of the explanation for the slow quarter can indeed be attributed to seasonality and that Q1 is the slowest quarter for services. However, if the UPS hardware market growth continues to slow, service revenues in 2012 may grow significantly less than in 2011, when they increased by 15 percent.” 



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
October 2018
Tools vs. sensors, functional safety, compressor rental, an operational network of maintenance and safety
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
October 2018
2018 Product of the Year; Subsurface data methodologies; Digital twins; Well lifecycle data
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
October 2018
Complex upgrades for system integrators; Process control safety and compliance
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me