1.3 GW of PV installations eliminated by EU anti-dumping duties in 2013; double-digit global growth still likely

IHS reports that European PV installations are expected to fall 6 GW in 2013, but the overall growth is projected to be at a double-digit rate because of very strong demand from Asia.

09/10/2013


European photovoltaic (PV) installations are forecast to fall by more than 6 GW in 2013, with 1.3 GW of this decline attributed to incoming EU anti-dumping duties on Chinese modules according to a recently released analysis from IHS

Despite this dramatic fall, IHS still predicts global installations will grow at a double-digit rate to 35 GW in 2013 driven by a surge in demand in Asia. 

In its latest quarterly analysis on global PV installation demand, IHS cut has cut its forecast for the second half of 2013 in Europe by more than 1.3 GW, citing the anti-dumping tariffs that came into force on June 6. As a result of these duties, and several other factors, including changes to incentive systems, IHS predicts total European PV installations will fall to 11.6 GW in 2013, down 33% from 17.7 GW in 2012. 

”Although the E.U. Commission has given a small window of opportunity by reducing the tariff to 11.8% for 60 days, IHS still expects dampened demand,” said Ash Sharma, senior director of solar research at IHS. “This decline comes in stark contrast to the sharp increase in module shipments from China as buyers stockpile ahead of the next tariff increase in August, As a result IHS has cut its European forecast for the second half of 2013 by 1.3 GW—a nearly 20% reduction from our previous outlook.” 

The analysis found that the EU duties will accelerate the decline in European installations with biggest falls in Germany and Italy. 

“Germany will account for the majority of this decline with installations 3 GW lower in 2013 than the previous year,” Sharma added. “Italy will also contract by another 2 GW.” 

Double-digit growth still expected

Despite this huge fall in European demand, IHS still predicts that the global PV market will grow in 2013, with installations hitting 35 GW, up 11% from 31 GW in 2012. 

However, unlike most previous years, Asia will be the driving force for growth, with installations in the region predicted to exceed 15 GW for the first time and thus account for 45% of global demand. This will make the Asian market larger than Europe for the first time. 

IHS reports that European PV installations are expected to fall 6 gigawatts (GW) in 2013, but the overall growth is projected to be at a double-digit rate because of very strong demand from Asia. Courtesy: IHSChina and Japan will account for the majority of this and IHS predicts they will become the two largest markets in 2013 based on volume. Japan will lead in terms of revenue, as IHS previously announced

In addition, no European countries in 2013 will rank among the top three markets for the first time ever, and IHS’ PV Demand Tracker’s Top 10 ranking forecast for 2013 is now much more evenly balanced across all geographic regions. 

Emerging markets provide relief—but not in 2013

While the solar market is continuing to fragment geographically in terms of end demand, solar companies cannot fully rely on so-called emerging markets to provide support amid waning demand in Europe in 2013. 

IHS predicts that emerging markets will add 5.9 GW in 2013 up from 3.4 GW in 2012. However, this will be made up by more than 60 countries globally. 

“The good news, however, is that installations in these regions will grow to 9 GW in 2014 and to more than 16 GW in 2017 highlighting the need for solar companies to focus on emerging markets—but more importantly picking the right ones,” Sharma concluded. 

The IHS Global PV Demand Tracker is published quarterly and contains detailed analysis of PV installations in 60 countries.



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
October 2018
Tools vs. sensors, functional safety, compressor rental, an operational network of maintenance and safety
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
October 2018
2018 Product of the Year; Subsurface data methodologies; Digital twins; Well lifecycle data
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
October 2018
Complex upgrades for system integrators; Process control safety and compliance
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me