Trial by Fire: Behind the Iron Curtain, in the early industrial computer age

Stephen M. Buck tells of the early struggle to bring computer technology to behind-the-Iron-Curtain Communist Poland, in the book, “Trial by Fire: Tales from the Dawn of the Computer Age.” Excerpt follows.

10/08/2012


Stephen M. Buck, retired Honeywell International site support specialist, wrote the book, “Trial by Fire: Tales from the Dawn of the Computer Age.”In the excerpt below, Stephen M. Buck tells of the early struggle to bring computer technology to behind-the-Iron-Curtain Communist Poland, in the book, “Trial by Fire: Tales from the Dawn of the Computer Age.” Other tales in the book go to post-Franco Spain, Socialist Venezuela, and post-World War II Brazil. The intersection of political ideology, human nature, and advanced technology creates a drama that is humorous, appalling, dangerous, and even lethal, he said.

Buck retired from Honeywell International as a site support specialist in 2003, after 37 years in the field.

Book excerpt: Technology to Poland

One of the Honeywell project managers that I knew came over and sat down at my table. “Would you be interested in installing a computer system in Poland?” he asked me.

“Of course,” I answered immediately. And then I thought about it for a second. “Wait a minute,” I said, “Isn’t Poland behind the Iron Curtain?” Of course it was. What was I thinking? Poland, since World War II, had been part of the USSR. It was referred to as a Satellite Country in that it had a “puppet government” but was actually controlled by the Soviet Politburo in Moscow. We were in a Cold War with the USSR. Why in the world, in 1980, were we selling them a process computer system?

It was a long story, and not a simple one. American companies were prevented from selling state-of-the-art computer equipment or anything else to Soviet Russia. However, it was permitted by the U.S. government to sell process computer systems or other computerized products to satellite countries provided that the technology was not the very latest. That was not a serious problem for Honeywell, since we were still using General Electric technology in our computer systems that dated back to the ‘sixties. So, technically, it was a “go.”

With these facts in mind, then, Honeywell applied for an export license to sell a 4400 process computer system to Zaklady Chemiczne, a chemical company in Inowroclaw, Poland. This raised all kinds of eyebrows at the federal level and generated tons of paperwork, but finally, after 18 months of wrangling, the official export license had been issued. And now I was being asked to accompany a software engineer to install the system. Of course, I said “yes.”

But dealing with the bureaucracy of a Communist nation was extremely difficult, if not impossible. I kept in touch with Phoenix as the months rolled by and we attempted to establish the necessary credentials, work permits, and visas. Finally, the paperwork was done and the date of departure was scheduled in early May. But I still had not received my airplane tickets from the Polish Government. I complained to Phoenix, and then I got a strange call from Warsaw. It was the worst connection in the world, and I struggled to make it clear that I needed a ticket to Poland from Seattle, Washington. I did not know if I had communicated successfully…

“Trial by Fire: Tales from the Dawn of the Computer Age,” is a book by retired Honeywell International site support specialist Stephen M. Buck.Weeks went by. The departure date was getting close, but I still had no tickets. Finally, with only a week to go, the tickets arrived. Or should I say the ticket. It was a one-way passage from Washington, D.C. to Warsaw. I couldn’t believe it. They had confused Washington State with Washington D.C.…It was way too late to make any changes, so I decided to use my company Air Travel Card to book a flight from Seattle to J.F.K. in New York and to use the ticket I had received from Poland to go to Warsaw. That would take care of that problem. But wait a minute! This was only a one-way ticket! I was going behind the Iron Curtain on a one-way ticket...That sounded like a recipe for disaster.

About the book

For more information about the book from Outskirts Press Inc., visit http://outskirtspress.com/trialbyfire.

- Introduction edited by Mark T. Hoske, content manager, CFE Media, Control Engineering and Plant Engineering, mhoske@cfemedia.com.



The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
Pipe fabrication and IIoT; 2017 Product of the Year finalists
The future of electrical safety; Four keys to RPM success; Picking the right weld fume option
A new approach to the Skills Gap; Community colleges may hold the key for manufacturing; 2017 Engineering Leaders Under 40
Control room technology innovation; Practical approaches to corrosion protection; Pipeline regulator revises quality programs
The cloud, mobility, and remote operations; SCADA and contextual mobility; Custom UPS empowering a secure pipeline
Infrastructure for natural gas expansion; Artificial lift methods; Disruptive technology and fugitive gas emissions
Power system design for high-performance buildings; mitigating arc flash hazards
VFDs improving motion control applications; Powering automation and IIoT wirelessly; Connecting the dots
Natural gas engines; New applications for fuel cells; Large engines become more efficient; Extending boiler life

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
This digital report explains how plant engineers and subject matter experts (SME) need support for time series data and its many challenges.
This digital report will explore several aspects of how IIoT will transform manufacturing in the coming years.
Maintenance Manager; California Oils Corp.
Associate, Electrical Engineering; Wood Harbinger
Control Systems Engineer; Robert Bosch Corp.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me