Energy, safety themes fuel manufacturing market optimism

Energy and safety have been the central themes of automation suppliers at the 2011 Hannover Messe, with many companies introducing products to specifically address current issues.

04/08/2011


Energy and safety have been the central themes of automation suppliers at the 2011 Hannover Messe. With energy prices the only obvious barrier, manufacturing leaders see a clear path to continued robust growth in the manufacturing sector.

The optimism at Hannover this year has been palpable. The return of crowds after a recession and a volcano has matched the return of sales for most major companies. Most manufacturers are back to 2008 levels and projections show double digit growth on the near horizon for motors, drives and automation companies.

“We have registered pleasingly high growth across all geographical areas and branches of industry. Our existing customers have regained their previous strength and have been joined by new customers and new fields of business,” says Beckhoff Managing Director Hans Beckhoff. “One of the main growth areas is the Asian market, but we also grew by 45 % even in North America and Germany last year.”

Other sectors are seeing growth because the push to get as energy-efficient as possible to cut costs is getting plant managers to look at new equipment. Atlas Copco, for example, introduced a new oil-free compressor at Hannover Messe that the company says offers up to 9% cost savings when compared with traditional turbo compressors.

“This is a relatively mature project,” said Stephan Kuhn, president of Atlas Copco’s worldwide compressor business. “The shape of the impeller, the direct drive technique and the magnetic bears all help to drove efficiency.” The compressor uses two high-speed motors and no gearbox, which drives a large part of the savings.

The move to get this kind of incremental improvement comes from a more Euro-centric approach to energy, Kuhn noted. “Europe pays a lot of attention to this issue,” he said. “We have 23% of our plants in Germany that run on nuclear power. Seven of them have been shut down to check for safety. Now there is discussion in Germany that if we didn’t bring them back on line, the cost would go up. And it’s already high today.”

Festo is planting its stake in the compressed air efficiency areas as well. The company cited four tips to consider when designing a decentralized compressed air preparation system:

  • What is the maximum flow rate required?
  • What connection sizes are required?
  • Do all consuming devices need the same compressed air quality?
  • What compressed air quality does the compressor actually provide?

Another company that is pushing the energy button is Bosch Rexroth, both for itself and its customers. “Bosch Rexroth has set itself the goal of lowering CO2 emissions in all Rexroth plants worldwide by 20% by 2020. We are now offering to share the expertise acquired as a result of this goal with other industrial organizations,” said Dr. Karl Tragl, chairman of the executive board of Bosch Rexroth AG. “The specially trained energy efficiency consultants from Rexroth have an in-depth understanding of all drive and control technologies, and a wealth of experience with almost all machine types. Pilot projects are showing that the investment is often amortized within the first year thanks to significant energy savings.”

Lenze is working at both ends of the drive efficiency issue. They released their 8400 decentralized inverter drive line, which promises a 30% reduction in energy consumption. They’ve also developed the Drive Solution Designer, which allows users to model the complete drive train to determine the most efficient design for the system. They see uses in the material handling industry, or other applications when long operations are needed and efficiency loss multiplies.

“With the long running time in material handling applications, energy use is one of the major cost factors – and one of the first places we look to reduce costs,” said product manager Craig Dahlquist.



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2017 Top Plant.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
March 2018
SCCR, 2018 Maintenance study, and VFDs in a washdown environment.
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
December 2017
Product of the Year winners, Pattern recognition, Engineering analytics, Revitalize older pump installations
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
April 2018
Implementing a DCS, stepper motors, intelligent motion control, remote monitoring of irrigation systems
February 2018
Setting internal automation standards

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Maintenance & Safety
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
Industrial Analytics
This digital report explains how plant engineers and subject matter experts (SME) need support for time series data and its many challenges.
IIoT: Operations & IT
This digital report will explore several aspects of how IIoT will transform manufacturing in the coming years.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me