CMMS Horror Stories: Five reasons a CMMS implementation can fail

As much as some CMMS vendors don’t like to admit it, not every CMMS implementation has been a resounding success.

11/01/2012


As much as some CMMS vendors don’t like to admit it, not every CMMS implementation has been a resounding success.

The right software can foster a positive institutional change, radically altering the trajectory of a company.

But if you speak with enough maintenance managers, you’re bound to hear at least one or two CMMS horror stories. These are cases where organizations didn’t get everything they hoped for – where software had to be scrapped shortly after installation.

Fortunately, with the right research and preparation, you can avoid these potential pratfalls. Here are five of the most common reasons a CMMS implementation sometimes doesn’t pan out – and how to avoid them.

1. Lack of Vendor Support

Oftentimes, the failure of a CMMS has less to do with your maintenance staff and more to do with the initial purchasing decision by upper management.

Not all CMMS packages were created equally. Sometimes a low advertised price comes with some pretty big asterisks: critical features end up costing extra, and your organization won’t always have the budget to handle the hidden costs.

Moreover, some CMMS companies seem to have a sell-and-run mentality. These vendors are happy selling software, but don’t have the resources to properly support customers post-implementation.

Avoid the Problem: When making a CMMS purchasing decision, look for vendors with an established history of providing excellent service and support to their customers. Be wary of vendors who’ve been around for less than five years.

2. Lack of Training

Another popular oversight in the implementation stages of a CMMS is that minor little issue of making sure your staff (and management) knows how to use the software you paid for.

Some modern CMMS software packages, like MicroMain Maintenance, are designed to be easy to use. But any solution that offers a worthwhile feature-set will still require adequate training in order to take full advantage of it.

Some companies go into their CMMS implementation with the belief that they’re going to accomplish all the preparation they need with four hours of online training.

It’s probably not going to happen. What ends up happening is your maintenance staff will develop their own individual approaches for using the software, leading to a database that is messier and more confusing than it needs to be. Meanwhile, time-saving features you paid for will be sitting unused – and not just because your staff doesn’t know how to use them, but because your staff doesn’t even know they exist.

Avoid the Problem: Find a CMMS vendor with extensive training opportunities – and plan your budget accordingly. Good training will pay great dividends later on.

3. Lack of Clearly-Defined Objectives

Implementing a CMMS with no clear objective is like making a vague New Year’s Resolution. Telling yourself you’re going to eat better and exercise more is never as effective as having a fleshed-out exercising itinerary with specific dieting plans.

Similarly, it’s best to develop a project plan with your CMMS. Ask yourself exactly what you’re hoping to accomplish. Are you hoping to reduce paperwork? Optimize preventive maintenance? Reduce the time it takes to manage work orders? Increase the accuracy of your reports?

Your goals can only be achieve if they’re properly laid-out and understood.

Avoid the Problem: Develop a project plan with clear objectives and timelines. The more complete your roadmap, the more likely be to you’ll follow it.

4. Lack of Communication With Technicians

It’s often said that communication is the key to success. Well, yeah. Sounds pretty obvious. But when it comes to maintenance management software, sometimes that’s taken for granted.

Too many software implementation decisions happen without key staff members in the loop. Opening the floor for communication will prevent problems down the road and give you a better sense of what you’re hoping to accomplish.

Who should be in the loop? Your technicians using the software, your finance department, your IT staff—anyone whose job is going to be affected. Even if your CMMS doesn’t upset your fundamental maintenance habits, it will produce systemic changes. That’s a good thing! That’s what you’re paying for. But it’s important to include your team in the decision-making process.

Avoid the Problem: Schedule team-wide meetings to open the floor for discussion. Take input from everyone who is going to use the software to make the best purchasing discussions and help develop your project plan.

5. Keep Maintenance Management Best Practices In Place

The right CMMS can do a lot for your company. It can assign and track labor. It can help control part inventories. It can improve fleet management. It can optimize preventive maintenance scheduling.

But what it can’t do is perform the actual maintenance for your team. The maintenance best practices you’ve developed are paramount for your company, and although a CMMS will make maintenance management easier, it won’t offset inadequate maintenance habits. Some companies have had problems with technicians falsifying data, which no CMMS can guard against. The key to maintenance success lies in your hands.

Avoid the Problem: Continue following the maintenance best practices you’ve developed. Use your CMMS as a tool to accomplish your maintenance best practices—not replace them.



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
August 2018
Choosing an automation controller, Lean manufacturing
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me