Bentley debuts energy simulator, announces two acquisitions at event

BeInspired conference in Amsterdam features outstanding design and construction projects worldwide

11/08/2011


At the opening of Bentley Systems’s BeInspired event in Amsterdam Monday, the information management software company announced two major acquisitions and a new software launch that will assist with energy modeling at all stages of a building construction project.

 

Be Inspired is an invitation-only event featuring presentations by the Be Inspired Awards finalists as well as executive roundtables focusing on critical issues in business, technology, and practice facing infrastructure professionals around the world.

 

Bentley announced the immediate availability of its new AECOsim Energy Simulator software. Its AECOsim Building Designer software will be available in early 2012, while the AECOsim Compliance Manager for LEED certification was released in May. 4

 

The Bentley energy products enable best practices in integrated building systems design and performance simulation. The AECOsim Energy provides comprehensive simulation for both quick and comparative evaluations, as well as for detailed engineering.

 

The EnergyPlus simulation engine is maintained by the U.S. Department of Energy, and it can greatly improve project quality with accurate simulations that closely correspond to actual building performance.

 

“AECOsim Energy Simulator engages building systems engineers’ expertise in specifying detailed building mechanical systems – along with all the other relevant building information and its context – and then again takes full advantage of its EnergyPlus engine to rigorously and reliably simulate performance,” said Dru Crawley, Bentley director, Building Energy Performance Products. "This will enable building designers, engineers, energy consultants, and owners to finally have confidence that the building will deliver on predicted energy performance.”

 

“AECOsim Energy Simulator gives us a precise and quick way to consider energy usage and efficiency to produce better-performing buildings,” said Gerry Kettler, managing principal, CEO, Facility Performance Associates. “Compared to other software available, it is more powerful and flexible while still being very easy to use. We have been doing energy modeling for ten years, and we’ve always wanted to be able to evaluate all of the key variables at once within the context of the architectural model, including lighting, materials, and heating and cooling systems. AECOsim Energy Simulator gives us the ability to do all of this with unmatched power and flexibility.”

 

Bentley Systems also announced it has acquired two other companies to expand its 2D and 3D modeling capabilities into cloud computing. Bentley acquired Pointools Ltd, a hardware-neutral provider of point cloud software technology, in order to integrate point cloud processing in innovative ways throughout its product portfolio. Point cloud inclusion supports Bentley’s commitment to advance information mobility in the rapidly-expanding world of point cloud file sharing.

 

Bentley also has acquired FormSys, based in Perth, Australia. The acquisition will expand Bentley’s SACS offerings for the design and analysis of floating structures, further extending the company’s reach in the offshore energy market

 

“I’m pleased that we are further expanding our leadership role in deeper offshore opportunities with this acquisition,” said CEO Greg Bentley. “We are mindful that ‘offshore’ makes up 70% of the Earth’s surface, and we would like to contribute even more toward its vital role in sustaining infrastructure.”

 

The BeInspired event culminates Wednesday with an awards ceremony recognizing outstanding achievement and innovation in infrastructure design, construction, and operations by winners selected from 57 project finalists by five independent panels of jurors. In total, nominations from 270 organizations in 42 countries were submitted in this year’s awards program.

 

 



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
August 2018
Choosing an automation controller, Lean manufacturing
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me