Advanced Blending Solutions heats up plastic-based packaging innovation

Application story: PC-based control and EtherCAT help reduce programming time and panel costs by 25%.


Focusing on the plastic film and fiber markets, ABS equipment supports higher end applications, such as food and medical packaging as well as fiber and resin compounding. Courtesy: Beckhoff AutomationPC-based control and EtherCAT help reduce programming time and panel costs by 25%: "Paper or plastic?" is a question many are asked at the local grocers’ check-out lines. Of course, we know that paper products are derived from trees, but what about plastic products? It’s no shock that plastic is a manufactured product that doesn’t occur naturally and must be specially produced. The plastic manufacturing industry can count the food, medical, and electronics markets as major growth areas for flexible packaging. Run by high-performance and open PC-based control technologies, the Menominee, Mich.-based Advanced Blending Solutions LLC (ABS) aims to remain competitive in the flexible packaging industry by offering custom plastic blending and extrusion control packages and flexible solutions that are robust, affordable, and innovative.

ABS is a supplier to the plastics industry of auxiliary equipment for material handling, blending, and controls. Focusing on the plastic film and fiber markets, ABS equipment supports higher end applications, such as in food and medical packaging, as well as fiber and resin compounding.

“To have competitive offerings for applications that range from simple to complex, we strive to provide innovative solutions that enable modern plastic film and fiber processing plants to maximize product quality while optimizing company OEE,” explained James Wood, ABS director of engineering. Striving to provide results-oriented solutions for each application, ABS works with customers to evaluate needs and deliver the most efficient and financially viable result possible.

“Offering our standard systems with available custom control packages is what distinguishes us from the competition,” Wood said.

Advanced Blending Solutions, based in Menominee, Mich., is a supplier to the plastics industry of auxiliary equipment for material handling, blending, and controls. Courtesy: Beckhoff AutomationInside the 99,000-sq-ft ABS production facility, Simplicity Series blenders, vacuum receivers, pump packages, and weigh hoppers are just a few of the advanced machines manufactured on site. Continuous blenders from the Simplicity Series perform simultaneous metering of all components, which eliminates the need for mechanical mixing while consistently producing the desired blend. ABS Smart Stands are used to verify raw materials to match recipes. The company also manufactures Angel Hair Removal systems, which are used to remove stringers (referred to as “angel hair” in the industry) from the resin.

ABS is committed to being a single-source provider for customers’ industrial blending and extrusion needs, from system design to on-site installation.

“Our machinery handles and stores the raw material upon first arrival to the customer’s facility and then conveys the resins to ABS blending equipment, which in turn blends the resins prior to extrusion. In many applications, our equipment functions in one of two modes: either as the master controller on the machine line, overseeing all aspects of the process, or as a slave device, integrated to and communicating through another vendor’s downstream plastic processing equipment,” said Wood.

Panel PCs and software PLC convey all the right benefits

Beckhoff PC- and EtherCAT-based controls handle many major functions in Advanced Blending Solutions’ systems, including blending/extrusion control throughout custom ABS equipment. Courtesy: Beckhoff AutomationDuring an ambitious campaign to all at once overhaul design, boost controller performance, and improve system communication, ABS decided to offer its Simplicity Series blenders with an industrial PC (IPC) technology in 2007. Since then, progress to modernize the architecture of ABS systems has been significant. Today PC- and EtherCAT-based controls handle many major functions in Advanced Blending Solutions’ systems, including blending/extrusion control throughout custom ABS equipment.

Industrial PCs were chosen after learning more about overall machine automation capabilities. Considering the number of systems ABS manufactures per year, using IPCs “gave us the ability to more easily manage our equipment by standardizing on a uniform control platform,” consisting of panel PCs, PLC software, and EtherCAT I/O modules, explained Wood.

Intuitive and feature-rich control systems from ABS are enabled by touchscreen panel PCs. With integration of a 15-in. built-in panel PC, equipped with an Intel Celeron 1.9 GHz dual-core processor, ABS can efficiently and effectively control machine construction and plant engineering applications. Power, functionality, and flexibility led ABS to use the panel PC as the “standard” control display for its applications.

ABS Continuous “Simplicity Series” blenders perform simultaneous metering of all components, which eliminates the need for mechanical mixing while consistently producing the desired blend. Courtesy: Beckhoff AutomationThe IPC “gives us everything we need, such as impressive power from multi-core processor technology,” Wood said. Compact Flash storage media means “it’s an exceptionally stable piece of hardware which is of critical importance in the harsh environments typical of plastics applications.” PC-based control also enables ABS to scale up and down to various system sizes and provides the ability to run on Microsoft Windows 7 OS and another software vendor’s human-machine interface (HMI) platform, used to program the system visualization.

Advanced Blending Solutions continued its machine modernization campaign with the addition of powerful programming software that integrates real-time control with a PLC system, motion control, and a programming environment in one package.

Beckhoff’s high-performance EtherCAT I/O and Bus Terminal I/O is distributed throughout Advanced Blending Solutions’ blending/extrusion systems. Courtesy: Beckhoff Automation“The power behind the software and ability to organize our plastics application code into libraries has been great for programming and using structured text versus our original system,” Wood explained. Blending, extrusion control, and material handling are all functions that the programming software “expertly supports in ABS blending/extrusion systems,” he said, adding other features along with Microsoft Windows 7, such as enhanced data collection, custom reporting, and remote access for ABS support teams and customers. In addition, it helped establish worldwide ABS network integration.

On the networking side, high-performance EtherCAT I/O and other I/O modules are used in ABS blending/extrusion systems, including velocity control equipment, which manages airflow/speed that’s moving material through the vacuum pump and migratory feeder machines that perform simultaneous metering of all components. In addition, the EtherCAT I/O system provides simple connectivity to the CANopen components used on ABS machines. EtherCAT I/O nodes, couplers, and a CANopen master terminal make it possible to transmit data from all connected CANopen devices over one standard Ethernet cable and one EtherCAT network.

With the Beckhoff CP6202, a 15-in “built-in” panel PC with a powerful Intel Celeron 1.9 GHz dual-core processor, ABS can efficiently control machine construction and plant engineering applications. Courtesy: Beckhoff AutomationEtherCAT is the standard network for the control solution. Almost all the IPCs and related I/O devices have EtherCAT connections, Wood said. “Considering the ease of installation using standard Ethernet cabling and components along with extremely fast update speeds, EtherCAT met all of our requirements. CANopen is primarily reserved for our special applications that interface with machinery from other manufacturers that use the CANopen protocol. However, EtherCAT master/slave gateway terminals that easily connect with legacy fieldbus technologies quickly eliminate any possible stumbling blocks in this area,” Wood said.

Adding savings to the mix

With the blend of TwinCAT, EtherCAT I/O, and panel PCs working together, ABS has reduced programming time, making it much easier to streamline and shorten the company’s product development cycles. Courtesy: Beckhoff AutomationWith so many additional capabilities available to Advanced Blending Solutions today, the company can progress to a higher level of innovation and continuous development. With the blend of TwinCAT, EtherCAT I/O, and panel PCs, ABS has reduced programming time, making it much easier to streamline and shorten its product development cycles.

The unified programming software “has enabled us to simplify the entire programming process, which is extremely beneficial to us,” explained Wood. “We took full advantage of PC-based controls, and there’s no need to implement a separate stand-alone PLC.” The unified programming software “is a clear driver for simplifying our engineering processes.” The panel PC technology “saved ABS between 20% and 30% on control hardware costs,” Wood said.

Beckhoff Automation products helped ABS blending machines be more effective. Courtesy: Beckhoff AutomationAdvanced Blending Solutions also can offer customers energy savings with its velocity control product. “Utilizing PC-based control and EtherCAT to moderate speed and manage our control algorithms, we’ve achieved energy savings of 30% in the material conveying process through better velocity control of the pumps,” said Wood.

With so many remarkable results piling up, Advanced Blending Solutions has successfully fulfilled its goals of creating custom control solutions while continuing to innovate and develop long-term competitive advantages for customers. However, development of high-performing, flexible, and cost-effective plastic processing equipment from ABS is far from over.

Future plans are well underway for additional control system upgrades with new automation technology.

“With powdered resins growing in popularity as raw material for plastics blending and extrusion, we are working on a line of automated feeders that will convey and blend powders. Based off our previous successes, we will work ... to come up with another innovative control solution for these new systems in development,” explained Wood.

- Submitted by Beckhoff Automation. Edited by Mark T. Hoske, content manager, CFE Media, Control Engineering and Plant Engineering,

The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
Pipe fabrication and IIoT; 2017 Product of the Year finalists
The future of electrical safety; Four keys to RPM success; Picking the right weld fume option
A new approach to the Skills Gap; Community colleges may hold the key for manufacturing; 2017 Engineering Leaders Under 40
Control room technology innovation; Practical approaches to corrosion protection; Pipeline regulator revises quality programs
The cloud, mobility, and remote operations; SCADA and contextual mobility; Custom UPS empowering a secure pipeline
Infrastructure for natural gas expansion; Artificial lift methods; Disruptive technology and fugitive gas emissions
Power system design for high-performance buildings; mitigating arc flash hazards
VFDs improving motion control applications; Powering automation and IIoT wirelessly; Connecting the dots
Natural gas engines; New applications for fuel cells; Large engines become more efficient; Extending boiler life

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
This digital report explains how plant engineers and subject matter experts (SME) need support for time series data and its many challenges.
This digital report will explore several aspects of how IIoT will transform manufacturing in the coming years.
Maintenance Manager; California Oils Corp.
Associate, Electrical Engineering; Wood Harbinger
Control Systems Engineer; Robert Bosch Corp.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me