View All Sustainability
Additive manufacturing (AM) is being utilized to drive the future of sustainable technology forward and encouraging innovation. Six indirect impacts and two direct impacts are highlighted.
Digital twins can provides actionable data that can capture the effects of micro- and macro-scale changes on a real environment, allowing users to make more informed decisions on creating greener built spaces.
The E&P industry is under increasing scrutiny as demands are growing for a more sustainable energy system.
The Internet of Things (IoT) can help industrial facilities gather more information and use it to make their operations more sustainable and efficient. See four industrial IoT OEE benefits.
IfM Engage, University of Cambridge and ABB have teamed up to develop a blueprint for better and more sustainable ways of working.
It is crucial to understand business goals and requirements up front and to have ways to test requirements and measure automation project success. Control system integration projects reduced waste to zero in the first year; the other reduced delays and backlogs.
It is critical to develop meaningful strategies to achieve net-zero targets and to begin to act now.
Combining highly efficient lighting technology, smart control and sensors, mean every aspect of the luminaire can be fully optimized.
Yokogawa's survey on environmental sustainability revealed the number of manufacturers moving forward with industrial autonomy is increasing.
Rheality has partnered with Clean Engineering to commercialize a "smart" AI-based system designed to optimize fluid production.
Laser-guided vehicles (LGVs) are used in manufacturing and distribution facilities for good reason
As businesses rise to an increasingly complex set of energy and sustainability challenges, the need for sustainable solutions is greater than ever. Michael Hyde offers some insight into what can be done today to optimize steam systems.
Duke Energy helps customers with conservation, sustainability and carbon goals
Spent lithium-ion batteries have metals that are hard to separate for recycling, but new tech by University of Illinois researchers uses electrochemistry to separate and recover the metals.
Sustainable resource processing method can reduce the cost of production, lower greenhouse gas emissions and create jobs
The plant's sustainability features could be relevant for other projects, regardless of product or processing
With net zero deadlines getting closer, more emphasis is being put on the need to cut carbon footprints.
With the use of renewables, green energy will become the norm, powered by LEED and PEER standards
Webcast presenter David Auton answered questions about topics such as predictive maintenance strategies, P-F curves, energy consumption as a prediction of failure, and more.
Project Manager, Dennis Group, Duluth, GA, United States
Hunter’s HVLS product development looked at moving air from all sides.
Natural gas helps to maximize the efficiency of the stadium’s operations for a better bottom line.
The Society of Tribologists and Lubrication Engineers (STLE) announced Greg Croce, a technical manager for Chevron Products Company, has been named president of the group for 2018-19.
Webcast presenter Tom Wenning from Energy Efficiency Research & Analysis (EERA) answered additional questions about topics such as artificial demand, dilute/dense phase transport replacement, and why you shouldn't open manual drain valves.
Improved efficiency, inexpensive fuel source, control over power and heat, and access to high-quality onsite-generated power and heat make combined heat and power (CHP) an increasingly attractive prospect.
A field-proven comparison method will provide an accurate test on each steam trap by using three or more test points on the steam trap station.
A process model can be anything from a simple spreadsheet to a complex model that includes all aspects of a real-world manufacturing plant, which includes only what is necessary to answer vital questions.
With margins getting narrower and facing intense competition from giants in every industry, many companies are looking to optimize their inventory and maintenance management. Well maintained equipment can mean the difference between a profitable year or a heavy loss.
Reliability Leader, Mid-Continent Business Unit, Chevron, Midland, Texas
Is it time for a boiler replacement? Maybe a controls and burner replacement will solve the problem.
A fuel cell creates electricity from hydrogen, or hydrogen-rich fuel, and oxygen, and can be used in a wide range of applications including transportation, stationary, portable, and backup power applications.
A new line of heat exchangers are made with the industry's highest density fins, allowing the liquid to be cooled to lower temperatures.
Calculate seasonal energy efficiency for your HVAC system.
Absorption refrigeration and freezing using ammonia-cycle chillers is useful if the thermal source is byproduct heat that would otherwise be wasted.
Get a better sense of the big picture and make adjustments to your operation.
The variable volume pump immediately responds to changes in the discharge line to provide optimum delivery of a liquid with changing viscosity.
The Solid Oil bearings have added enhanced formulas to benefit more applications such as food processing equipment, cranes, machinery, and conveyors where manual greasing would raise safety issues.
Respondents to the Plant Engineering 2016 Energy Management Study identified six high-level findings impacting the manufacturing industries today.
Switching your ac motors to include a soft starter may result in an initial payout. Because of the reduced power consumption and maintenance, they will typically pay for themselves very quickly, and the benefits will be fully experienced from that point forward.
The latest report from the Consortium for Energy Efficiency (CEE) offers a complete analysis of the current state of energy management in the United States and Canada, and a road map for future opportunities for manufacturing.
The GORDONRAY DF gas-fired infrared heaters are designed for commercial, industrial, and institutional applications.
Pneumatics is considered extremely simple, convenient, and flexible. With just a few tricks, engineers can save time and optimize system performance. Here are ten practical tips.
Key findings from The Association for Packaging and Processing Technologies Research.
The Autogard 820 Remote-Reset Torque Limiter reduces downtime for manufacturers in heavy-duty industries such as energy, metal processing, mining, aggregates, automotive, food processing, and pulp and paper.
One approach to deciding between a thicker door and a faster door is found in a recent report by the Door and Access Systems Manufacturers Association High-Performance Door Division.
VFD impact on TEFC motors, squirrel cage rotors and condition monitoring issues discussed.
Respondents to the Plant Engineering 2015 Energy Management Study identified six high-level findings impacting the manufacturing industries today. See findings and access full report.
Respondents to the Plant Engineering 2015 Maintenance Study identified six high-level findings impacting the manufacturing industries today. See findings and access full report.
Respondents to the Plant Engineering 2015 Safety Study identified six high-level findings impacting the manufacturing industries today. See findings and access full report.
To use a flowmeter to its full potential, always focus on knowing the flow application parameters and requirements long before deciding to use one type of flowmeter versus another.
Steam is not the easiest medium to measure, but you still can get reliable measurement of steam flowrates.
Here are 9 reasons why using steam is good for your plant.
Measure, compare and uncover the “energy vampires” in your operation to decrease energy use and improve reliability
The Americas are projected to be the fastest growing regional market for operator terminal revenues to 2018
Spirax Sarco's SX80 and SX90 process controllers arelow-cost and flexible temperature controllers, offering accurate process control.
Articles about improving your proactive maintenance plan, reducing HVAC energy consumption, correcting induction motor power, the EPA’s clean water regulations, and achieving energy efficiency were Plant Engineering’s five most-clicked articles from last week, May 19-25. Were you out last week? Miss something? You can catch up here.
According to the data in this report, 33% of manufacturing facilities have energy reduction goals of at least 10% for the upcoming year, and another 40% are aiming to cut energy consumption by 5% to 10%.
At Plant Engineering's May 15 Webcast, Ethan Rogers, Senior Program Manager for Industry with ACEEE, discussed the types of programs targeting SMMs as well as those serving the industrial sector as a whole.
The National Tooling and Machining Association (NTMA) is finding ways to fill the manufacturing skills gap through developing a new online and hands-on education inititiave called NTMA-U.
Biofuels have become a popular subject in the energy community, but how does this energy source actually work, and are there any downsides to using them?
Reducing an HVAC system's energy usage can often mean a costly equipment upgrade, but new products on the marketplace can assist in reducing an exsisting HVAC system's energy consumption with add-on software.
Meeting tightened standards with new solutions
Making a commitment to reduce energy
By any standard, 2013 was a big rebound year for manufacturing, and the momentum continues into 2014.
From its effective use of developing products for the manufacturing sector, water is seen as a critical opportunity, and a critical challenge
The digital revolution, globalization, and market forces are upending the manufacturing industry, causing manufacturers to face unprecedented challenges
Why a steam system should not be thought of as individual functional items but as an interdependent ecosystem.
After you’ve done the basics on energy management, where do you look next for cost savings?
Despite efforts from some U.S. states to re-evaluate their net-energy metering policies, the impact of any potential changes on the U.S. photovoltaics industry is expected to be negligible in 2014, according to IHS Inc.
Dramatic efficiency gains possible
Make the best long-term decision
Finalists in the Energy Management category for the Plant Engineering 2013 Product of the Year competition.
For commercial and industrial facilities the benefits of condensate recovery can be measured in several ways: energy reductions, increased operational efficiency, chemical treatment cost savings, water conservation and emission control.
Each flowmeter technology has its pros and cons; learn how to select the best flowmeter based on your specific flow criteria.
You can’t control what you can’t measure, so effective monitoring and targeting is typically an important step in any campaign to save energy.
New designs offer increased efficiency, more turndown
The global market for microinverters will expand by a factor of four from 2013 through 2017 as microinverters are adopted in greater numbers outside the U.S., according to IHS.
View lost compressed air like any other material loss
Measure the problem, then set out on a repair journey
One of the most important principles of good water treatment is to provide the boiler with the best quality feedwater that we economically deliver.
Dept. of Energy wants all the sub-$100 meters we can manufacture to cut energy consumption
The ETP Hyloc provides hub shaft connection even with high torque and radial loading and can be reset at diffrerent positions without losing concentricity
LED lighting is an easy way for many building owners to cut down on energy bills and reduce potential maintenance and safety costs
Developments for the SunShot Initiative are underway to reduce the cost of energy systems and make the technology more robust for future users.
Many plants continue to consume far more power than is necessary to run their pump systems, simply because there is a lack of awareness of the losses. Recent educational efforts are starting to bring those issues to the forefront.
A new system under development converts natural gas and sunlight into a fuel called syngas, which power plants can burn to make electricity
Global PV inverter market revenue last year rose to $7.1 billion, up from $6.7 billion in 2011.
Practical energy sustainability for industry
Profit engines for industry
Heat recovery options
The WFH LED luminaire is tested and rated for 60,000 hours of maintenance free use and carries a five-year warranty
How to make the right choice between a soft starter and a variable frequency drive
A new survey of more than 400 global photovoltaic inverter customers has revealed a rapidly growing need for energy storage in PV systems.
The introductory letter to the new report issues by MAPI and The Aspen Institute on the need for accelerated policy changes in the manufacturing sector.
The concept of full selective coordination has changed the way engineers must think when designing electrical distribution systems.
The Rumford Paper Mill has seen its energy costs reduced thanks to aggressive energy management strategies
Chuck Edwards, president of Lenze Americas, discussed some of the issues facing U.S. manufacturing with Plant Engineering.
Frost & Sullivan research analyst Anna Mazurek discussed the importance of intrinsic safety systems.
Piercarlo (PC) Romano is chairman-elect of the board of the Control System Integrators Association (CSIA) and president, Avid Solutions Inc., a CSIA Certified member headquartered in Winston-Salem, N.C.
Hackers are changing their tactics by targeting employee groups of up to 250 people at one time with fake emails or by targeting the smaller company in a merger and acquisition.
Manufacturers are starting to look to veterans and the skills they learned during their tours of duty as a way to shrink the Skills Gap.
Keeping your data center from overheating is important, but it's not the only element for proper maintenance.
Investment continues to recover following the economic downturn, during which many projects were either postponed or cancelled altogether, with industrial capital expenditure forecast to grow by 6.8% from 2011 to 2012.
Mori Seiki opened its first U.S. manufacturing facility in Davis, Ca.
The Get Skills to Work" program is a major step forward in addressing the Skills Gap by getting military veterans to use their applicable talents and skills in manufacturing.
ISM report jumps above 50% level for first time since May as new orders expand
Achieving effective changeovers should start with eliminating those that are unnecessary.
There was at once a sense of urgency and purpose as manufacturers and educators gathered to address the lack of skilled workers for manufacturing.
Does it really cost too much to be sustainable with industrial/electrical systems?
$300 million investment will allowed production of 70 million Kisses a day
In distribution centers, production lines, warehouses and other industrial settings, automated guided vehicles (AGVs) increase efficiency and reduce costs. However, the poor performance of their battery-based systems diminishes these cost-savings and efficiencies.
Ahead of 2012 PACK EXPO, PMMI releases global growth report
Production Manager, The Raymond Corp., Greene, N.Y.
Homeland Security official to deliver event keynote
Investment in plants and people drives a stampede toward growth.
As part of Plant Engineering's Mid-Year Report, "Bullish on Manufacturing", Dave Besser, senior vice president at Crown Equipment Corp. talks exclusively online about how the company's integrated manufacturing approach has helped streamline operations.
Mike Morrison, executive director of manufacturing services at Dell, discusses the company's move into the manufacturing supplier space and what it has learned as a manufacturer over the years.
Lift trucks are essential in many industries and nearly all warehouse operations. Many fuels are used, including diesel, LP and electric batteries. The newest, and possibly the ideal fuel candidate is starting to make its place known. It’s compressed natural gas (CNG). Today CNG is an attractive energy source because of its economy, cleanliness, safety and rapid refueling characteristics
Defined roles can bring greater benefits from each software solution.
Photovoltaic (PV) installations in China are set to reach over 4 GW in the second half of the year, according to a new report.
Rapid growth in the retrofit flat panel detector (FPD) market is predicted to signal the start of a new era in “modular” X-ray for general radiography.
Daily Insight: Airbus in Alabama and what ‘Made In America” means
The market for distribution automation and smart grid networking hardware in the Americas is anticipated to grow to nearly $1.7 billion in 2012, with suppliers of both automation equipment and networking infrastructure experiencing sustained growth over 2011.
The Raymond Corp.'s Youth Apprenticeship Program graduated latest group of students from New York school district.
The industry has now had a chance to take stock of the U.S. Dept. of Commerce’s announcement that it will impose an import tariff on PV cells, or PV modules that contain cells, manufactured in China.
This year, the IMS Research mobile radio division exhibited and presented at the TETRA World Congress in Dubai.
For many manufacturing plants, “green” has become a somewhat muddied color. No other sector of the economy comes close to manufacturing in terms of generating industrial waste and pollution.
Energy use in manufacturing plants and commercial buildings accounts for nearly half of all energy consumption in the U.S. Industrial and commercial facilities are also responsible for nearly half of U.S. greenhouse gas emissions, which contribute to climate change.
Data center power distribution in Europe accounts for a very small amount of the $440 million accumulated in 2011. The potential for a growing market exists, but a lack of visibility and investment remains a hurdle.
Increased focus on providing optimum patient care in the most cost efficient way is fuelling demand for intelligent infusion devices termed “Smart Pumps.”
Businesses look to implement, embrace sustainability as a critical success factor for long-term value for their customers, our common planet. Sustainability is also strongly linked to making the most of the organization’s energy.
Companies are crowd-sourcing their RF databases to aid GPS and improve indoor location accuracy as well as create a stronger alignment with satellites.
Installing a good CMMS can have a profound impact on your maintenance operations – and your bottom line.
From Sapphire to Lumens, conference will bring unparalleled coverage of the LED lighting, backlighting markets to display week 2012
The Society for Information Display is very excited to host LED Lighting Evolution: From Sapphire to Lumens on June 6, 2012 as part of Display Week 2012.
Product lifecycle management technology provides the ability to share information across an enterprise, including product design and the manufacturing cycle, and should be utilized by all plant managers.
Integrating an enterprise resource planning solution with carbon accounting software aids in a company’s efforts to better track, manage and reduce its overall carbon footprint.
The volume of smart cards sold for use on mass transit systems is estimated to have approached 400 million in 2011; and announcements such as those last week from the UK government to extend the Oyster card nationwide, are aiding in cementing transportation as the 4th largest smart card application, behind SIMs, payments and government ID.
Apriso and IDC study looks at integrating divergent facilities and people.
New U.S. Industry VP sees manufacturing addressing critical issues.
S&C Electric Co. plans to expand facilities in Franklin, Wis. to meet smart grid growth needs.
Several areas should be considered when looking for potential opportunities to reduce energy consumption via the drive system.
As 2012 begins, manufacturing continues to lead the U.S. economy in its slow climb back to prosperity.
Sara Greenstein from Underwriters Laboratory explains how the average consumer's expectations of a product correlates with manufacturing production and how that affects the industry at large.
Sustainable engineering is moving to the forefront as U.S. manufacturers look to become more and more viable in a growing global industry, particularly as the U.S. moves out of a recession.
Safety networking is on the rise, especially in Asia, but not as fast as total networking on a global level.
Wen Jiabao, the Premier for the People's Republic of China, is expected to open the event on April 22 in Germany, accepting the German government's official invitation.
The 2012 AHR Expo took place Jan. 23-25, 2012 in Chicago. Among the new products introduced at the show were:
Cost containment, talent and global issues among the top 13 issues
Select the correct fixture for the appropriate environment
Company leaders describe how specialists from the Illinois Manufacturing Extension Center enabled the company to increase efficiency, contain operating costs, and achieve ISO 9001:2008 registration.
Evans Manufacturing is an Illinois maker of cylindrical steel parts for equipment.
Although the UK saw record demand for PV modules up until the December 12th Feed-in tariff cut, on average December saw module prices in the UK decline in response to the heavy cuts that took place, albeit temporarily.
Holding the ideal level
Flow metering a key to efficiency
Plant earns $2 million in recycling revenue last year
Global revenues for the industrial hydraulics market are expected to exceed $10 billion by 2013, which is a growth of 30% from 2010's revenues.
New company begins operation with emphasis on water distribution in commercial and industrial sectors.
Frito-Lay, inspired by the idea of taking one of their plants off the energy grid, turned their Casa Grande, Ariz. manufacturing plant into a 'near net-zero' facility, running on renewable resources.
Energy efficiency efforts have risen in recent years as environmental and economic concerns have grown, particularly with the recent economic recession.
Finalist in Lighting in Plant Engineering’s 2011 Product of the Year competition
Finalist in Material Handling Systems in Plant Engineering’s 2011 Product of the Year competition
Relentless focus on customer value reduces time to market.
Inventory management requires much more than just knowing the numbers. Knowing the relevant formulae is the easy part
The spinoff was necessary strategically, regardless of how it may have been handled PR-wise or whether customers were ready for the change. It’s really about Netflix moving towards being a streaming-only business as fast as they can.
While prices are declining for modules, the industry is expected to level off with increased demand in the fourth quarter of 2011.
Maintenance Manager, Noranda Alumina
Facility Operator, BP
Rice Lake Weighing Systems purchased a manufacturing facility in Fernley, NV, to expand their manufacturing for heavy-capacity customers.
Association members and media company begin new content partnership
Association members, media company to deliver information to manufacturing industry
The matter of generating energy is well-engineered and well-understood. How we use energy, and how much of it we use, on the other hand, is still mostly a mystery for most end users.
Collaboration between Cisco and Schneider Electric will provide solutions that manage energy use across the entire building portfolio
Outstanding Efficiency Possible Without Plant Remodeling
New event features an industry summit to set the course for the domestic manufacturing industry
Society of Hispanic Professional Engineers (SHPE) to bring together professionals, students and educators on October 26-30, 2011, in Anaheim, Calif.
Annual Excellence Inside International Conference expects 2,500 manufacturing practitioners to gain insights from keynote speakers, share best practices, network, Oct. 24-28, 2011, in Dallas, TX.
Energy efficiency is a critical issue for plant managers, so suppliers are working hard to come up with new ways to deliver solutions and strategies that are easy to implement and deliver a return on investment.
Any manufacturer that wants to survive and flourish in today’s environment must bring the powerful principles of Lean manufacturing to bear on reducing costs and improving manufacturing cycle times.
A worker assisting in abandonment operations died Monday morning at a non-producing natural gas platform owned by Hilcorp Energy Co. in the Gulf of Mexico, U.S. officials said.
The blowout preventer that failed on a BP well last year was four years overdue for maintenance under driller Transocean Ltd.’s internal guidelines, a U.S. regulator said.
The blowout preventer that failed to stop last year’s Gulf of Mexico oil spill hadn’t been tested to see if it could cut through a bent drill pipe, said a senior official of the company that made the device.
After a terrible 2009 and a promising 2010, indicators look positive for the IAEE industry to show continued growth in 2011 and 2012.
Webinar: April 19, 2011
Students from Lower Dauphin High School, in Hummelstown, Pa., bring their cell phone-driven energy management system for schools, businesses to TecToYou pavilion at Hannover Messe’s conference
Pace Integrated Systems Inc. assets, daily operations have been acquired by Schneider Electric – to deliver building management, security solutions
Siemens interactive manufacturing game nears 10,000 visitors in less than a week
Schneider Electric has acquired Summit Energy Services Inc., a provider in outsourced energy procurement and sustainability services to industrial and institutional enterprises
With the continuing emphasis on energy efficiency, the move toward CFL bulbs has intensified, and the final U.S. manufacturing plant that made incandescent bulbs closed last September
Energy efficiency is more than a business driver; it is a moral imperative, according to the results of a recent Harris Interactive Poll commissioned by Schneider Electric.
Most than 80 percent of manufacturers participating in survey say green supply chains will become more important in the next three years
Research on corrosion has shown us that there are two main mechanisms of corrosion, electrochemical and chemical oxidation. Both of these types have many forms and ramifications, some more accentuated than others but the mechanism with which they degrade a substance or material can always be traced back to one of these two types.
Steam systems provide heating, cooling, humidification, water heating and process heat for hundreds of different industrial activities. According to the U.S. Dept. of Energy (DOE), 45% of all the energy purchased by U.S.
The electric power system is in the midst of monumental changes driven by the need to address rising energy costs and demand.
Every quarter, IMS Research personnel in China, Europe, Korea, Taiwan and the USA survey companies representing both the supply side and the demand side of the LED market in order to assess the health and outlook of the LED market. The latest report showed that Q3’10 was another record quarter for GaN LED MOCVD installations with a record 230 merchant tools shipped.
Now more than ever, plant owners are looking for ways to maintain their facilities with tighter budgets and higher uptime demands. Consequently, managers must pursue strategies that ensure plant uptime and reliability.
In a recent post on the DisplaySearch Blog, the merits and challenges of Google TV in today's competitive environment were discussed. Though I agree on some of the points made, there are several where I politely disagree:
"Global strategic alliance" to bring professionals, students together
Realignment and new message announced at Editor's Conference; 'We're going to show you a Schneider Electric you may not know...'
The conference will cover a host of new technologies and service solutions that can help cut facility costs, reduce equipment downtime, improve equipment reliability, and increase employee safety.
The majority of the energy coming into the plant is used to power machinery, to convert raw materials into intermediate products, to generate steam, or to facilitate production. If it’s used inefficiently, you can make behavioral and programming changes to use energy more productively.
To meet rising human expectations without inflicting irreparable damage on the environment or consuming an undue share of the resources that will be needed by future generations, many manufacturers are re-examining the way they conduct their operations to find ways to make them more sustainable. The goal is to do more with less: in less time, using less energy, water and raw materials, and with less waste and emissions.
Outdoor and indoor commercial lighting was the main focus, and residential retrofit bulbs less so. Although it is a lighting show rather than an LED show, many of the major LED companies such as Nichia and Seoul Semiconductor had a good presence at the show.
Dual Technology Wall Switch Sensors are designed to provide optimum energy management and control for a variety of industrial and commercial applications. A self-adaptive option adjusts time delays based on usage patterns, assigning delays from seven to 30 minutes. It even differentiates electrical noise from human motion.
Siemens Industry Inc. will provide power metering equipment and services for the U.S. Navy’s Southwest Advanced Metering Infrastructure project by teaming with American Systems. The contract to furnish and install advanced electrical metering infrastructure at various locations throughout the Navy’s Southwest Region is funded by the American Recovery and Reinvestment Act of 2009 (AR...
Manufacturers should consider energy as a cost component of manufacturing production, measure where and how energy is used, and create an implementation plan for using energy more efficiently.
Industrial and infrastructure companies can meet their automation needs and deliver on growing energy management requirements with Schneider Electric PlantStruxure architecture, the company says
Rising energy costs are accelerating the installation of energy management systems (EMS). But, once these systems are installed, what do you do with the data provided? Do these data show you where to save energy? Do they show how much energy you are wasting? While few things can replace the eye of a trained energy engineer, even the most skilled among them can use help in recognizing abnormal e...
Oct. 29 live event will highlight ways to build continuous energy improvement
Aberdeen research shows top companies already have a monitoring plan in place
The 18th annual Automation Fair, sponsored by Rockwell Automation, is Nov. 11 and Nov. 12 at the Anaheim Convention Center. More than 8,000 industry leaders and vendors are expected to attend two days of presentations on automation solutions and industry insights. “While this year has been extremely challenging, we can help our customers prepare for the economic recovery by showing them h...
Researchers seek input from plant managers on energy strategies
Today's news reports seem to contradict those broadcast yesterday. One day, the economy is poised for recovery; the next day, the end of this recession is nowhere near. It reminds me of the predictions of that infamous groundhog each Feb. 2. But at this point, the critter seems to be better at predicting the future.
With the goals of increasing energy security, energy efficiency and promoting cleaner, alternative energy at U.S. military bases, GE announced it has been awarded $2 million in Federal stimulus funding from the U.S. Department of Defense (DOD) for a smart microgrid demonstration project at Twentynine Palms Base, CA.
Recently released software interactively guides operators to improve effectiveness by up to 15%.
Power and energy continue to be daily buzzwords in nearly every industry – not just automation. But, some argue that the global recession has all but extinguished the energy efficiency topics that burned like a bonfire most of last year. Klaus Helmrich, CEO of the Drives Technologies Division at Siemens, told Control Engineering editorial director David Greenfield in an exclusive intervie...
Broad-based solutions part of "war on waste" in energy systems
Aberdeen report finds business, environmental needs merging
But Johnson Controls/IFMA study finds barriers to action
Lean culture the subject of educational sessions in Charleston, SC
Compare financial health of up to 20 companies in China as a result of a Panjiva and Sinosure agreement to deliver information on millions of Chinese manufacturers.
The Obama Administration stimulus package proposed a strategic investment to catalyze private efforts to build a clean energy future. The plan includes investments in renewable generation, grants to institutional entities for energy sustainability and reimbursement for qualifying projects enabling the transition from the nation’s current outdated electricity grid to a new digital grid.
EZPlantView is a software tool that provides engineers and managers visualization into the plant from the convenience and efficiency of their desks.
The Gasoila line of gauging pastes for the petroleum market includes all-purpose, regular and gas-gauging varieties.
RTDs are designed for precision, repeatability and have a high signal-to-noise ratio.
Looking for help in reducing energy costs? Look on your plant's electric bill
Unlike other commodities, electricity must be consumed almost immediately after it is created. As such, electricity needs to be in a constant balance between supply (generation) and demand (consumption). This dynamic forces the electric industry to be on standby with enough generation capabilities to handle an amount slightly greater than the maximum amount that all consumers at once could dema...
The cost of energy has risen dramatically in recent years, and the effect on operating costs and profits is keenly felt across industry. The process industry is no different. The ARC Advisory Group is conducting a survey to identify best practices in energy management in the process industries.
Company makes several announcements at Greenbuild Conference
The Institute for Supply Management (ISM) offers its Sustainability Survey report for the answer.
Identifying and prioritizing opportunities for improvement is key to crafting a sustainability program that sticks
ARC study to look at how manufacturers are cutting energy costs
Kurt Vonnegut once wrote that a “flaw in the human character is that everybody wants to build and nobody wants to do maintenance.”
A recent Los Angeles Times article about the 99 Cents Only Store contained the following quotation from its CEO: “There’s no question we’re going to need to do something. When you are part of a family that comes up with a concept, sometimes you’re the last to admit that it needs to be changed.
Honda of America Manufacturing has invested more than $1.5 billion in its Anna, OH, Engine Plant since the facility first opened in 1985.
Fluke launches new Website to provide online help for maintenance and management personnel
When National Manufacturing Week opens Sept. 23, attendees can choose from design engineering to sustainability, interests of all kinds will be covered as the show again joins five other expositions through Sept. 25 at the Stephens Convention Center in Rosemont, IL.
This in-situ combustion flue gas oxygen analyzer helps optimize burner fuel-to-air ratio to reduce emissions.
The expansion set of cable outlet sizes for the series 713, M12 connectors includes sizes ranging from 2.5 to 8 millimeters. Smaller wire sizes allow for more options in automation applications and industrial networks. The new outlet has strain relief and an IP67 environmental protection rating. Available in straight and right-angled field-attachable connectors, the outlet features a metal lock...
The M-710iC/50 SE FoundryPRO robot is IP67-protected for operation in harsh environments. The robot is coated with epoxy, and the wrist has protective covers to withstand high-pressure washing. The base of the robot purges air to disallow vapor entrance. Double oil seals at the joints and coated bolts provide additional protection against water.
The new environmental regulations impose numerous constraints on companies and have significant implications for their financial health. The energy-saving and greenhouse gas emission (GGE) reduction programs proposed by various authorities present major challenges for many organizations. The Kyoto protocol targets a 6% reduction in GGE below 1990 levels by 2012.
If you type “sustainability strategy” or “sustainability plan” into any Internet search engine, more than 1 million results are returned. Similarly, a recent study conducted by the Vandiver Group indicated that approximately 70% of the companies surveyed have or are in the process of developing a sustainability strategy.
Operations consulting firm The Results Group (TRG) has released the first Green Enterprise Maturity Model to help companies increase revenue and lower costs while reducing carbon footprint.TRG’s Green Enterprise Maturity Model enables companies to assess Green maturity relative to their industry, execute business-focused Green initiatives, and create a road map for building a dominant competitive position. The Green Enterprise Maturity Model enables TRG to characterize company readiness and capability to capitalize on new opportunities. The model profiles companies at four levels of maturity—Complier, Dabbler, Consistent Improver and Enterprise Optimizer—across major business dimensions. The model-based road map seeks to drive innovation and performance improvement across all enterprise operations, including supply chain, customer support, and product development.“We see a lasting sea change around sustainability.
Series 04 and Series 14 stainless-steel switches protect control panes from impact and harsh environmental and operating conditions. The units are configurable as pushbuttons or indicators in 22.5- and 30-millimeter sizes. Illuminated with high-intensity LEDs, the products are fitted with a stainless-steel lens, a protective front ring, and bezels for added impact resistance.
Myths abound about HVLS fan technology: It’s expensive, it’s heavy, it’s ineffective. The physics behind the technology isn’t complex; it’s just about air movement. How the air is moved is the real science.
Now that summer’s here, increased temperatures and humidity have an increased impact on the climate within the plant. Between keeping energy consumption down and the workforce comfortable while on the floor, plant managers can find themselves in a conundrum. Do they keep the plant floor air conditioned and the workers content?
How long has your plant been operating since it was built? Is your maintenance thorough and up-to-date? Has there been an unexplained increase in energy usage? Have changes been made to the building systems? The answers to these questions and more may indicate that your plant needs recommissioning. Recommissioning, or “retrocommissioning,” is much like new building commissioning.
“Manufacturing for the Future” is not just a nice slogan, it was the subject of the June 3 discussion in downtown Chicago, sponsored by Financial Times and Machines Italia, a part of the Italian Trade Commission.
There’s no escaping issues related to energy efficiency: global warming, carbon footprints, consumption. The buzzwords abound. A less frequently publicized, but certainly no less important issue connected to energy efficiency is your company’s bottom line. In short, energy efficiency saves you money; the bigger your facility, the more you can save.
Ohio potato chip maker's new plant to be Green Building Council-certified
Schneider Electric, the well-known supplier of electrical distribution and automation and control solutions, replaced roughly 7,000 lighting fixtures in 21 U.S.-based facilities and instantly found itself spending $580,000 less a year on electricity bills. It also picked up $196,000 in federal tax benefits. And that was just the beginning.
The series 84 range of extremely low-profile, durably-rugged switches and indicators features a minimally low back-of-panel depth thus making them ideal for applications where space is restricted.
Sustainability is the farthest-reaching trend to hit manufacturing in years, and this latest E-newsletter from Plant Engineering will help you sort out how it will affect your organization and how you can best use it as a strategy for good business and a better bottom line.
One of the largest aluminum manufacturers in China expects to reduce plant downtime and boost product quality by installing a specialized measurement and control solution from Honeywell.
A new report confirms that best-in-class service organizations are adopting data-analysis tools, common knowledge bases, and simulation modeling technology to increase the speed and quality of post-sales service decision-making.
Vascomill 10, a liquid tool for high-pressure oil applications, is especially suited for cutting oil applications in Swiss-style CNC lathes. Its low viscosity allows for maximum air escape, making it resistant to foaming. The fluid, a vegetable ester-based cutting oil, pairs its low viscosity with a high flashpoint comparable to mineral oils of the same viscosity.
The PowerLogic PM750 power meter provides high-accuracy power, energy and demand measurements. It can be used to replace analog meters; and for stand-alone metering in custom panels, switchboards, switchgear, gensets, MCCs and UPS systems. It supports direct connection to up to 480 Vac phase-to-phase, and integrates with PowerLogic energy management systems.
Rockwell Automation will add predictive modeling capabilities to its line of process automation solutions through the acquisition of Pavilion Technologies. Modeling technology allows users to predict how production processes will be affected as certain conditions—temperature, pressure, etc.—change. Having ready access to this information enables companies to wring more value from existing production assets.
In an effort to reinforce its hybrid and process industries offerings, Rockwell Automation has agreed to buy Pavilion Technologies.
ANSI/ASHRAE/IESNA Standard 90.1, Energy Standard for Buildings Except Low-Rise Residential Buildings, provides minimum requirements for the energy-efficient design of buildings except low-rise residential buildings. Fourteen proposed addenda to the 2007 standard, due out for publication later this year, currently are open for public comment.
Former President Bill Clinton will deliver the keynote speech of the opening plenary of Greenbuild, scheduled for Nov. 7-9, at Chicago’s McCormick Place.
Executive vice president Stephen Roell is appointed chief executive and a new logo, corporate slogan and ad campaign better aligns with the company’s image and marketing efforts.
A producer of industrial sand, Fairmount Minerals was recently awarded the inaugural NAM Sandy Trowbridge Award for Excellence in Community Service.
The PowerLogic high-density metering cabinet is designed to provide accurate energy monitoring. Available in type 3R outdoor or type 1 indoor configurations, it enables facility managers to allocate and bill for energy based on actual usage by departments, tenants and cost centers and in accordance with the national sub-billing standards, ANSI C12.
In his new GreenBits blog, ASHRAE president Kent Peterson lends his perspective about industry trends and society happenings.
From emergency and disaster preparedness to the rise of sustainable building design, today’s facility manager must adapt to current trends and prepare for future problems. The top trends were discussed at IFMA’s forecasting workshop in Houston.
The company’s electrical group adds energy specialist John White to lead its sustainability efforts
It can be a confusing world out there when it comes to energy. Climate change, rising energy costs, availability and new energy technologies all vie for our time and attention. In such an environment it is tempting to 'wait and see’ how these energy-related issues will ultimately be resolved before making any long-term decisions.
Vari-Max IFRG precision high efficiency indirect gas fired heaters are more than 90% efficient and are capable of a 1,000 F temperature rise with a 1,200 F discharge temperature. They provide heated, contaminant-free process air and have a heavy-duty construction. Des Champs Technologies www.deschamps.
Suppose you were a board member and your CEO announced at a board meeting that a major plant, one in which the company had invested hundreds of millions of dollars, was being disposed, resulting in a major charge to the company. How would you feel about his judgment? On the other hand, if these were human assets being disposed through layoffs, how would you feel? If you’re like most, ther...
Click here to view PDF of : Properly applying power quality devices to variable speed drives.
Recent enhancements made to the line of low NOx KC1000 high-efficiency boilers and water heaters support sealed combustion and can be configured to support dual-fuel (natural gas or propane) applications. The units will not require seasonal combustion air recalibration in applications where ambient air temperatures remain between -30 and 130 degrees F.
Click here to download this word document .
The digital tension meter is a low-cost solution for displaying web tension in areas of the web where access to a tension control unit is not required or convenient for the operator. It features a simple LCD readout with 0.6-inch, bright red digits and a selectable decimal point. Its high-impact plastic case and sealed front panel ensure operation in wash-down or dusty environments.
According to a report by NPR’s Kathleen Schalch, Washington, D.C. will become the first major city to require that private developers build "green" buildings. New structures will have features such as green roofs, natural light, fume-free carpets and paint, low-flow water fixtures and no-flush urinals, which use a chemical trap instead of water.
RAPID 2007 comes to the Detroit Marriott at the Renaissance Center May 1-3, 2007. North America's largest annual rapid manufacturing conference and exposition, the event provides an interactive environment where buyers and sellers can gather to discuss, demonstrate, review and evaluate the latest applications in design, prototyping, tooling, and direct manufacturing. It allows industry professionals to meet new suppliers, compare equipment, network with peers, discover new applications and find a range of solutions and cutting-edge products to make operations more efficient and profitable. Highlights include three days of exhibits, more than 20 conference sessions and pre-conference tours and workshops, among others.
Pocket-sized spiral-bound reference books provide industrial managers, supervisors and employees with knowledge and skills needed to improve ergonomic conditions and practices. Ergonomics for Managers and Supervisors includes information and methods to identify ergonomic issues and guidelines for adjusting and designing a safer work environment.
With a focus on ease of navigation and new technology, the American Society of Heating, Refrigerating and Air-Conditioning Engineers unveiled its redesigned Website, www.ASHRAE.org. An improved Website is a cornerstone of fulfilling the society’s new strategic plan, which calls for sustainability leadership, world-class educational programs, a raised public profile and global access to te...
With the first anniversary of Hurricane Katrina here and gone, a professor of mechanical engineering at Tulane University does not want the disastrous event to slip from the national consciousness. To that end, Robert G. Watts, Ph.D., will lead a discussion forum titled “Environmental and Other Issues in a Post-Katrina New Orleans,” to take place on Nov.
Illuminated-ring keys considerably improve visual components, provide more security, and should be present on all operator panels that control modern machines and systems, according to the company. Its illuminated-ring keys are composed of a short-stroke key, a source of light and high-performance LEDs. The main component is the luminous ring, which is said to provide evenly distributed light around the key.
Jane Lansing, vice president of marketing at Emerson, will present a keynote address at ISA's upcoming Marketing and Sales Summit, to be held Sept. 13-15 at the Omni Hotel in Austin, Texas. "Engineers are People, Too," will focus on marketing to engineers and technical customers. Lansing’s presentation will explore methods of communicating effectively with audiences, implementing efficient marketing in a challenging environment and developing effective tools for a sales force. "For years, marketers have been faced with a challenge to do more with less," said Shari Worthington, co-chair of the summit.
The American Society of Heating, Refrigerating, and Air Conditioning Engineers and the Association of Physical Plant Administrators, an association serving educational facilities professionals, have signed an agreement to provide mutual support in promoting sustainable higher education facilities. The memorandum of understanding, signed July 10 by the two groups, announces ASHRAE’s and APPA’s intent to share resources jointly promoting educational programs, creating new products, and encouraging continuing professional development for their members. The associations also will explore cross-marketing each other’s products and services. “The relationship between ASHRAE and APPA is crucial to furthering new advancements in HVAC&R technology,” said ASHRAE president Terry Townsend, P.E. “With this memorandum in place, ASHRAE and APPA members have the tools to provide ongoing technological solutions to educational facilities managers.”.
The T4012 interlock switch features a compact, glass-filled NEMA 6 thermoplastic housing, making it suitable for use in most applications, including washdown environments. When used with the optional stainless steel actuator, these switches are designed to provide a minimum of two million actuations in demanding environments.
The Alliance to Save Energy will sponsor a Webcast, “What Your Management Needs to Know about Energy Cost Control” on June 29 at 2 p.m. EST. The Webcast will explore strategies for controlling energy costs and ways to secure top-level management support for energy management initiatives. Speakers include: Christopher Russell, director of industrial programs for the Alliance to Save Energy, will keynote and moderate this web seminar. Andrew Goldstone, Norm Ziemer, director of facilities at ExcelaHealthLatrobeHospital, Latrobe, PA There is a fee for this seminar.
Web exclusive: Manufacturing approach to reliability excellence Click here: https://www.plantengineering.com/article/CA6324018.html FEATURES Finding labor savings — high- to no-cost solutions Before higher investment options are implemented, lower investment alternatives should be considered. Many options require little or no investments but can lead to substantial labor savings. Click here: https://www.mhia.org/articles/4_10_06.cfm Survey indicates optimism about manufacturing growth Chromalox, Inc. surveyed manufacturing engineers and engineering management, with one-third of the 85 respondents working outside of the U.S.
Web exclusive: Manufacturing Approach to Reliability ExcellenceClick here: https://www.plantengineering.com/article/CA6324018.html FEATURES MRO spending: plan for the unplanned Unplanned maintenance needs can wreak havoc, both on the plant engineer and the bottom line. Plant Engineering senior editor Kevin Campbell talked with W.W. Grainger’s Ken House about solutions for these unplanned events.Click here: https://www.plantengineering.com/article/CA6328312.html?stt=001&text=mro+spending AWWA heads to Phoenix for annual event Part of the American Water Works Association’s 125thanniversary celebration, the AWWA’s annual DSS Conference and Exposition will be held Sept.
Which sounds worse to you: That gasoline prices are headed past $3 a gallon, or that gasoline prices have gone up 100% since last summer? Not much of a choice there, is it? A year ago in our cover story on energy, we pointed to the sharp rise in fuel prices – in particular that gasoline had just gone past $2 a gallon.
Two new reports show steady growth and continued optimism for the manufacturing sector. The quarterly Manufacturers Alliance/MAPI Survey on the Business Outlook showed a March 2006 composite index of 74 equals that of the previous December 2005 survey, an indication that the industrial component of the U.
Go to www.plantengineering.com now and voice your views on this month's question: What area of your plant operation will receive the least amount of attention this summer: capital improvements, employee training, automation upgrades, energy management or equipment maintenance?
They say there are four stages of grief: denial, anger, depression and acceptance. The Gulf Coast has reached the final stage — acceptance — yet what residents and business face is unacceptable. When I visited the area in December, I could see what one person I talked with called "a new normal.
The Advance University interactive ballast training website has been officially approved by the Association of Energy Engineers (AEE) for its Certified Lighting Efficiency Professional (CLEP) program.
How It Works: Groups of reader volunteers serve as EQA Reader Panels that thoroughly evaluate every feature article in every issue of Plant Engineerng. These EQA Reader Panel evaluations help us judge the effectiveness and usefulness of our feature editorial.They guide us in the selection of subjects and in the length and content of our articles.Additional comments provide important direct feedback to our editors.No other publication has an editorial evaluation method comparable to EQA. For 38 years this continuing program of editorial research has helped us create a unique editorial environment that attracts readers to your advertising.It’s our assurance of better editorial…your assurance of better readership. TestedNine Ways: 1. Title reflects the content of the article. 2. Information is presented clearlyand logically. 3.
Molex Inc. and LumaCon, LLC have entered into a definitive agreement providing Molex sole rights to manufacture, distribute and sell Small Form Factor (SFF) connectors using the patent-pending LumaCore technology. Connectors based on LumaCore technology are ideal for applications that require highly reliable multi-fiber optical interconnect solutions, such as in the aerospace, industrial and communications markets, where environmental extremes push the envelope of traditional optical interconnect solutions. The broad line of LumaCore optical terminus products enhance Molex’s comprehensive offering of single and multi-fiber interconnects by delivering dense optical interconnect solutions to the military and aerospace markets. LumaCore products offer all of the service and design flexibilities found in the single-fiber solutions, while enabling interconnect points to have nearly the same density as multi-fiber ribbon architecture interconnects. Under the terms of the agreement, Molex gains immediate access to LumaCon’s novel, all-metallic LC-compatible interconnect product line LC2 and its circular connector product offering, which is based on industry leading Mil-DTL-38999 Series III connector bodies and will be marketed as Molex’s MXL-38999 interconnect system. Under the agreement, LumaCon will provide direct design and marketing support, as well as transition all manufacturing and technology to Molex.
Power Measurement will operate as a global “power monitoring and control” group under the Schneider Electric name. Brad Forth, Power Measurement president and CEO, will lead Schneider Electric’s Power Monitoring and Control (PMC) initiative as vice president, PMC from the group’s headquarters in Victoria, British Columbia. Schneider Electric acquired Power Measurement in April 2005. As an integrated part of the Schneider Electric family, Power Measurement, now Schneider’s PMC group will continue to develop intelligent systems for analysis and control of energy consumption. “At a time when energy management has never been more important, it’s very exciting for everyone here to be a part of this great initiative,” said Forth.
A new coolant decanter improves efficiency of parts washers and machine tool coolant sumps by making it possible for coolant to be virtually recycled for reuse. The Mighty Mini SSTweights just seven pounds and is designed for the machine tool industry. Its small footprint is well suited for areas where space is at a premium.
The J Series Clear Cover for non-metallic enclosures allows full view of controls inside the enclosure without the inconvenience of having to open the enclosure, which is ideal in corrosive environments. The clear cover is available in two newly-added sizes: 8 inches x 8 inches and 12 inches x 12 inches.
NightStar is an LED-based illuminator for the Magnicator II level indicator. It provides superior plant-wide visibility of flag indicators in low or no-light environments. Accurate and quick level verification at night and in darkened areas is now possible. The illuminator is safe and reliable with a 10-year life, is field upgradeable and provides the longest field-of-view.
Most of us are perfectly happy with one career that sustains us and fulfills us and for which we receive a modest level of recognition. Joe Foszcz has had two. Our senior-most senior editor retires in October after 18 years sharing with PLANT ENGINEERINGS readers the knowledge he gained from his years as a plant engineer himself.
Originally broadcast November 15, 2005This Register As if electrical costs weren’t enough of a problem for plant managers, the quality of the current is a serious issue for many manufacturers. What can plant managers do to ensure power quality, whether from their own generation or from utilities, and what are some of the issues every plant engineer needs to know when confronting this issue. Senior Editor, Jack Smith, moderates a panel of thought-leading plant managers and power quality experts through a discussion of the solutions available for plant managers who are faced with the issues of power generation and electrical costs for their plants. Topics of discussion include: How Harsh are Harmonics? How do they manifest themselves? How to minimize them? Tracking and eliminating transients and surges Preventing voltage sags and swells Return on investment Power quality improvement strategies Detection and measurement Grounding Mitigation Panelists Include: Rudy T. Wodrich, P.E., MBA Manager — Power Quality Correction GroupSchneider Electric Rudy manages a US$10M business unit within Schneider Electric, and is ultimately accountable for sales, marketing, application engineering and field service of all products relating to power quality throughout North America.
Electronic circuits require dc voltage and current to operate. Some circuits use a "single-sided" power supply, meaning that the reference voltage is 0 V and the operating voltage is some positive value, such as 5, 12 or 15 Vdc. The value of the voltage depends on the type of circuit or equipment to be powered.
PLANT ENGINEERING magazine will be a contributing sponsor of the Robert W. Campbell Awards, which honor companies that successfully integrate safety, health and environmental concerns into their business plan. The award is cosponsored by the National Safety Council and ExxonMobil Corporation, and will be presented at the annual National Safety Congress in Orlando, Sept.
The effort in Kansas City to launch the Dream It-Do It campaign has been entrusted to Paul Scianna, executive director of the Alliance for Innovation in Manufacturing (AIM) in Kansas City, and Phyllis Eisen, vice-president of The Manufacturing Institute, which is part of the National Association of Manufacturers. PLANT ENGINEERING spoke exclusively with both to find out how Dream It. Do It. is being received, and why the effort is so important to the short- and long-term future of manufacturing: When you talk with educators and young people, what's their initial impression of Dream It.
Intelligent energy management ION 7550 RTU option converts the ION 7550 energy meter into a highly effective solution for combined metering of utilities such as water, air, gas, electricity and steam. Using multiple I/O points and Modbus Master support, the meter inputs pulses, analog signals and data from other meters and transducers. Data and sequence-of-events logging, GPS time synchronization and Web-enabled communications options allow the unit to operate as a data concentrator for collecting, storing and delivering information over public or private networks to energy management or automation systems for later analysis. Power Measurement www.pwrm.com Write 313 on PE card Lock-out relays Lock-Out Relays protect critical electrical equipment in utilities and plants.
The economic theory of supply and demand developed by Alfred Marshall suggests that prices increase in response to tight supplies and increasing demand. Marshall died in 1924, so he missed two of the better examples of his theory at work — Prohibition, and today's energy supply crisis. It is the latter event that drives many managers to the point where they are at least grateful the forme...
So I'm at National Manufacturing Week, and I'm moderating the live Webcast PLANT ENGINEERING did that was sponsored by Kaman Industrial Technologies in conjunction with Rockwell Automation on the advantages of setting up a motor management program. In the course of our discussion (which you can now see on our Webcast archive at www.
Chicago-based Schneider Electric has expanded its corporate portfolio with the announcement of two acquisitions in the last month. Schneider Electric has purchased the Magnecraft product range from MSD, Inc., a leading U.S. supplier of industrial relays with $14 million in sales in 2004. Schneider Electric said the acquisition will significantly broaden the company's product offerings, making ...
This issue is devoted to the first plants to be recognized in our PLANT ENGINEERING Top Plants program — Hewlett Packard Caribe BV and S&C Electric John R. Conrad Industrial Complex. These two plants are very different. HP makes electronic products on the micro level. S&C makes high-voltage electrical equipment on the macro level.
Industrial pumps The course, Reliability & Maintenance of Industrial Pumps, teaches people to learn how to stop repairing pumps. It is designed toward the understanding of centrifugal pumps and systems to gain maximum efficiency and life from the equipment. The course uses a textbook written for mechanics, operators, and maintenance personnel who work with centrifugal pumps. American Trainco , americantrainco.com , Write 315 on PE card Pump control PumpSmart Model 200 Version 4.0 is a microprocessor-based, variable speed drive, programmed specifically for centrifugal pumps up to 700 hp.
Machiavelli had a pretty good understanding of how difficult it can be to manage significant change. He went on to observe that the innovator has many enemies in those who have done well under the old order and only lukewarm defenders in those who will do well under the new order. Even those who will do well in the new order recognize the risk involved in change and tend to wait to see how thi...
Jack Welch, the former CEO of GE, called it a "digital cockpit." Others frequently refer to it as a "dashboard." No matter. The concept is the same: a group of numbers or graphs that allow you to constantly check the pulse of your plant or department quickly — and in real time, if possible. Ideally, such a tool includes alarms that alert you when something goes wrong or when measures move...
Ethernet is a local area network (LAN) technology with networks traditionally operating within a single building, connecting devices in close proximity. At most, Ethernet devices should have only a few hundred yards of cable between them. For two devices on a network to successfully communicate, they must both understand the same protocol.
With the uncertainty surrounding the availability and prices of today's energy supply, plant engineers are tasked with maintaining operable and cost-effective facilities. Those who meet the challenge must be well versed in the principles of energy management and equipped with the proper tools. A ground-up approach, starting with submetering of equipment, lines, processes, or departments c...
After coming out of the recent economic good times, 2001 has been a year to shake our confidence. Our nation has been attacked; our economy has slowed. Earlier in the year, we wondered if the California electric grid was beginning to resemble that of a Third World nation. We experienced rolling blackouts.
For as long as I've been an editor, I've heard the complaints about lack of time and funding to attend trade shows. If it wasn't a time crunch, it was a money crunch. Or vice versa. And then there was the approval issue: "I'm not sending people off to [you name the city] on the off chance that they'll discover or learn something useful.
Drawing the line on sexual harassment I have a couple of comments regarding the October 2000 Human Side of Engineering case, "When "love" turns sour.
Plant engineers are industry's stewards. That may not sound like much of a compliment. But in the truest sense of the title, it is a very high position indeed.
Despite the madness surrounding Jan. 1, 2000, the next millennium doesn't officially start until Jan. 1, 2001.
Metasys M5 facility management and operator workstation helps users manage, analyze, and convey the information of a business enterprise.
Literature on EMD Series energy management dryers outlines how to realize significant savings under low flow conditions while avoiding the dew point variations of standard cycling types.
ThermaPlex Hi-Torque gear oils are available in five ISO viscosity grades and deliver long-lasting protection against corrosion, rust, and unwanted environmental contaminants.
Circular fluid bed processors for drying, moisturizing and cooling powder and bulk solid materials are detailed in a 6-p brochure.
The 370 Series fluorescent light is suited for environments exposed to damp, wet, or extremely dusty and dirty conditions. The fiber glass enclosure is weather-resistant and corrosion-free.
A comprehensive catalog describes a line of absorbent and disposal items and a closed-loop program covering pickup and proper product disposal.
A full range of services for the handling, removal, transportation, recycling, and processing of hazardous, nonhazardous, and special wastes is available.
LED indicators for use on panels, equipment, and machinery are covered in a 4-p selection guide. The guide presents a wide assortment of products that can be sealed to IP 67 for hostile environments and install easily in a range of panel thicknesses.
A brochure features open and enclosed metal halide prismatic glass reflectors in two different styles. Units presented feature controlled uplight, high efficiency integral ballast, and white corrosion-resistant paint.
StreamGuard Passive Skimmer floats in the sump of catch basins, oil/water separators, or stormwater vaults to capture accumulated hydrocarbons. Unlike common adsorbents, the product does not deteriorate or release absorbed hydrocarbons.
WebCD Boilerspec CD-ROM interactively helps specify firetube, watertube, and feedwater equipment online.
Crane Boss 200 wireless radio remote control has a heavy-duty flexible antenna, and sealed pushbutton controls for more severe environments. The handheld device controls two hoists with three motions of two speeds using two selector switches.
Paula Graham, a clerical employee in the plant engineering department, believed with obvious justification that the inhalation of tobacco smoke was hazardous to her health.
ED200 intelligent condensate drain has no moving parts and uses capacitance sensing to discharge condensate and not compressed air. The fully automatic unit operates with 100% oil or water and any intermediate level of emulsification.
Mist Eliminator removes water and oil from compressed air using depth-of-bed coalescing technology to produce a 0.5-psi pressure drop over a 10-yr expected life. The filter achieves 100% efficiency in removing particles larger than 3 microns and 99.
V-LOG energy management trim technology is a control valve design solution for severe service applications. The trim provides staged pressure reductions through a series of discrete flow channels.
For literature and product information on building automation systems, circle the appropriate number on the reader service card.
Features and benefits of the Z Series multiwing fans are presented in a 24-p catalog. Also included are: technical information, specification data, and airflow test result graphs.
Stainless steel cooler lowers the temperature of compressed air to provide clean, dry, cool air to overheated controls. A 6 X 6 X 2-ft cabinet can be cooled and maintain a NEMA 4, 4X, or 12 rating.
This issue introduces the name and new logo of Cahners Business Information, publishers of Plant Engineering. You'll notice the new logo in the upper left corner of our cover.
A 4-p brochure describes a line of personal radio communication systems for use with group tours or training groups, especially in noisy environments.
Eco-10 10 V option electronic fluorescent dimming ballasts provide energy management lighting control. These ballasts establish lighting controls independent of power circuits, so retrofits and upgrades are simple and less costly. Lutron Electronics Co.
Responding to a report from the Fed that industrial production rose 0.5% in December, while capacity utilization edged up slightly to 83.4%, National Association of Manufacturers President Jerry Jasinowski issued the following statement.
A low-cost building management system for facilities up to 100,000 sq ft incorporates LonMark open communications to provide an easy upgrade and expansion path, easy installation and setup, and local and remote monitoring of HVAC, lighting, and energy management. Honeywell, Inc.
IQ Energy Sentinel microprocessor-based, energy submeter represents an alternative to separate watt meters, watt-hour meters, and watt demand meters at roughly 1/3 the installed cost.
Electronic submeter provides data on electricity consumption, demand, and time-of-use; and may be interfaced with energy management/building control systems. Alarms can be set to trigger when usage exceeds preset limits.
Model RTHC Series R water-cooled, helical, rotary liquid chillers are offered in sizes from 300 to 450 tons (60 Hz) and 250 to 380 tons (50 Hz).