The PCM-3240 is a PC/104 four-axis stepping/pulse-type servo motor control card that simplifies stepping and pulse-type servo motor control, providing added motor performance. It has been modified to fit into a standard PC/104 board, eliminating the chance of mechanical interference in the embedded controller. The card’s intelligent NOVA MCX341-motion ASIC provides a variety of motion control functions, such as 2/3-axis linear interpolation, two-axis circular interpolation and T/S-curve acceleration/deceleration rate. The control performs these functions without requiring any main CPU processing. Other features include: a hand wheel and jog junction, a 4-MPPS pulse output for each axis, a CW/CCW or pulse/direction pulse type, a 1-MHz encoder input for each axis, an A/B phase or up/down encoder pulse, a constant speed control and position management and software limit switch functions.

Advantech Corporation, eAutomation

www.eAutomationPro.com/us

Advantech Corporation is a CSIA member as of 2/26/2015

Do you have experience and expertise with the topics mentioned in this content? You should consider contributing to our WTWH Media editorial team and getting the recognition you and your company deserve. Click here to start this process.