Georgia Tech gives students an early lesson in workplace safety
To increase job-safety training and awareness among younger Americans, scientists from the Georgia Tech Research Institute have joined with OSHA and other groups to introduce health and safety training to Georgia high schools. The aim: to ensure that young workers grasp the basics of job safety before they ever reach the workplace.
As part of an effort to increase job-safety training and awareness among younger Americans, scientists from the Georgia Tech Research Institute (GTRI) have joined with OSHA and other groups to introduce health and safety training to Georgia high schools.
The aim: to try to ensure that young workers grasp the basics of job safety before they ever reach the workplace.
GTRI instructors and others have already taught OSHA job-safety classes at three Georgia high schools, and more schools are scheduled to receive instruction. The effort stems from a 2006 agreement between OSHA, GTRI, Georgia schools and other groups to make safety and health training more available to the state’s students.
“Today, it’s an effort for many people in the workforce to remember safety basics — for example, to put their safety glasses on when working with chemicals,” said Michelle L. Dunham, a research scientist in the Occupational Safety and Health Division of GTRI’s Electronic Systems Laboratory. “We want to make it automatic for kids joining the workforce to take those kinds of precautions — the same way they always put on a seatbelt in a car because that’s what they’ve grown up doing.”
Students attend a 10-hour course that’s team-taught by OSHA, Georgia Tech instructors and industry representatives. The modular course covers general safety and health information as well as instruction pertaining to students’ areas of work specialization.
“There are lots of different modules, and depending on the school, they’ll vary,” Dunham said. “We’ve started out teaching students going into the construction trades, but the course could be helpful to students in other study areas, such as automotive and medical services.”
To date, GTRI instructors and others have taught the 10-hour course at three Atlanta area high schools — Maxwell High School of Technology in Lawrenceville, McEachern High School in Powder Springs and Dekalb High School of Technology-North, in Dunwoody. More than 100 students have completed the classes.
Those graduating receive the OSHA 10-hour card, which can give them an advantage with employers wanting to comply with OSHA regulations.
The course is rigorous, Dunham notes. Missing even a single class means a student does not receive a 10-hour card. “We decided that this was an adult learning process,” she said. “Students had to learn that this was like being on a job.”
Dunham, an industrial hygienist, explains that the Georgia Tech Safety and Health Program also works directly with industry. Georgia Tech staff members perform on-campus training and consultation at the OSHA Training Institute Education Center, and also at job sites throughout Georgia and the Southeast.
Fall protection equipment
Miller arc-rated fall protection products meet ASTM F887-05 arc-flash standards. The products feature Revolution harness technology, which is available with DualTech webbing that retains fire retardant properties and comes with leather insulators. The Kevlar web look on the harness back pad allows for a connection without metal when with used with Kevlar shock-absorbing lanyards with choke-off loop.
Miller Fall Protection
www.millerfallprotection.com
Arc flash prevention components
The FlashGard low-voltage motor control center offers disconnect units from the vertical bus with the door closed and an optional, remote-operated racking device so users can advance and retract the stabs from distances up to 25 feet. An ARC Reduction Maintenance Switch reduces the time-available fault current. The system also includes a freewheeling racking mechanism that prevents overtorquing, and an interlock prevents removal of the buckets while the stabs are engaged on the vertical bus.
Eaton Corp.
www.eatonelectrical.com
Cable lockout
The hasp is constructed of tough and durable Nylon and can accommodate up to six padlocks. Highly visible red color identifies the padlock for lockout use. All metal parts are zinc-coated or non-corroding, and the 3/16-inch steel cable is rated at 1,000 pounds minimum pull strength at the weakest point. Cables are PVC coated, providing wear-resistance for the cable and scratch resistance for the mechanisms and devices they are used on. The unit is available in two cable lengths.
North Safety Products U.S.A.
www.northsafety.com
Do you have experience and expertise with the topics mentioned in this content? You should consider contributing to our WTWH Media editorial team and getting the recognition you and your company deserve. Click here to start this process.