Frack well flow meter

The ST100 flow meter can be calibrated to measure various kind of process gas, including wet gas, mixed gases and dirty gases.

By Fluid Components International February 2, 2015

ST100 Series mass flow meter meters can measure flow rates as low as 0.25 SFPS and as high as 1000 SFPS with up to 1000:1 turndown. They are calibration-matched to specific mixed gas compositions and to the installation’s temperature and pressure conditions. These meters provide operator in-service calibration verification and eliminate unnecessary de-installation/re-calibration costs. Also standard in ST100 is an on-board data logger capable of storing up to 21 million readings of any or all measurements. The logged data is easily retrievable from a removable 2GB micro SD memory card or by uploading from the unit’s USB port. The basic insertion style air/gas meter features a no moving parts, non-clogging thermal flow sensing element and accuracy of ±0.75% of reading, ±0.5% of full scale and repeatability of ±0.5% fs. 

Fluid Components International

Original content can be found at Oil and Gas Engineering.