Wireless sensors push smart machines into green revolution

STMicroelectronics, ARaymond, and Micropelt demonstrated thermal-energy harvesting solutions at Hannover Fair.

05/31/2011


STMicroelectronics (NYSE: STM), ARaymond, and Micropelt have announced that they are jointly presenting thermal-energy harvesting-based solutions to power ‘smart sensors’ and ‘smart microsystems’ at the Hannover Fair under the common theme of "Green Solutions." The three companies partnered to exhibit the value chain of self-sustaining wireless systems. 

Wireless sensor and actuator systems are reportedly strong future contributors to energy and resource efficiency; the improvement of asset health and uptime; and more efficient condition-based maintenance and operating safety of machines and production equipment. Ubiquitous wireless systems are indispensable to achieving a huge green impact; however, they are a viable option only if local battery maintenance can be circumvented.

Micropelt has developed chip-sized thermogenerators (TEGs) which turn local heat fluxes into electrical energy for ultra-low-power systems. Due to the highest power density in a few square millimeters of footprint, Micropelt’s chip-sized thermogenerators have attracted many customers worldwide. STMicroelectronics, one of the world’s biggest chip makers, and ARaymond, a worldwide supplier to the automotive and solar industries, are presenting solutions they have co-developed with Micropelt. 

ST focuses on components supporting energy harvesters in their complementary role of an energy generator with energy storage. Consequently, the development efforts between ST and Micropelt focused on an evaluation system featuring ST’s new robust and long-life solid-state thin-film rechargeable battery (EnFilm) combined with Micropelt’s Thermal Electrical Generator (TEG) chip. The Perpetual Energy Module (PEM-TE01) system demonstrates how these two technologies can provide uninterrupted power and establish a virtual perpetual-energy solution to a long-life and maintenance-free wireless system.

ARaymond’s engineers teamed up with Micropelt to develop a new industrial approach to hermetically packaging Micropelt’s energy-harvesting wireless-sensor evaluation platform, TE-Power NODE. The joint effort has resulted in ARaymond’s fully energy-autonomous wireless temperature sensor Heat BiTe for use in solar-thermal and similar systems which carry a liquid that is warmer or colder than ambient. Micropelt uses a variation of this liquid harvester solution which features a flat interface for attachment to any warm surface to ruggedize their evaluation kit to IP47- and IP48-level. It is now called TE-Power MOTE. 

“Leveraging our expertise in power management and power saving, energy harvesting is a very attractive new opportunity for which we can apply existing ST technologies,” said Igor Bimbaud, ST’s New Energies BU Director. “Our jointly developed PEM-TE01 demonstrates the concept of a perpetual self-sustained energy supply for low-power systems. Our thin-film cell stores every bit of energy that has been harvested, keeping it for years and working throughout the device’s life.”

“Many of our customers complain about wiring issues while asking for greater intelligence in the components. Wiring is expensive, resistive to automation and every interface can cause trouble,” explained Dr. Hans-Jürgen Lesser, ARaymond’s Executive Director for R+D. “We found Micropelt’s thermoharvesting technology to be a perfect solution to these issues, because we already provide fluid handling solutions to many customers. Now we can integrate our thermoharvesting Heat BiTe into various fluid systems achieving a wireless and fully autonomous condition-monitoring system. This is one of the most versatile intelligent components available on the market and we’re proud of it.” 

“New technologies evolve by evidence,” concluded Wladimir Punt, Micropelt’s VP Sales and Marketing. “We are very pleased with the results of our cooperations with ST and ARaymond which proves to our current and future customers worldwide that thermoharvesting is a solution to many of today’s issues.”

- Edited by Chris Vavra, Control Engineering, www.controleng.com



No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
2017 Lubrication Guide; Software tools; Microgrids and energy strategies; Use robots effectively
Prescriptive maintenance; Hannover Messe 2017 recap; Reduce welding errors
Safety standards and electrical test instruments; Product of the Year winners; Easy and safe electrical design
Infrastructure for natural gas expansion; Artificial lift methods; Disruptive technology and fugitive gas emissions
Mobility as the means to offshore innovation; Preventing another Deepwater Horizon; ROVs as subsea robots; SCADA and the radio spectrum
Future of oil and gas projects; Reservoir models; The importance of SCADA to oil and gas
Diagnostic functions for system safety; Specifying industrial enclosures; Effective decision support for a crisis
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Natural gas for tomorrow's fleets; Colleges and universities moving to CHP; Power and steam and frozen foods

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
Featured articles highlight technologies that enable the Industrial Internet of Things, IIoT-related products and strategies to get data more easily to the user.
This digital report will explore several aspects of how IIoT will transform manufacturing in the coming years.
Maintenance Manager; California Oils Corp.
Associate, Electrical Engineering; Wood Harbinger
Control Systems Engineer; Robert Bosch Corp.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me