Wireless sensor networks to grow to $2 billion by 2021

IDTechEx's research indicates that the market for wireless sensor networks will grow from $.45 billion to about $2 billion in the next 10 years. Current and emerging applications include ...

09/20/2011


According to IDTechEx research in the report Wireless Sensor Networks 2011-2021 WSN will grow rapidly from $0.45 billion in 2011 to $2 billion in 2021. These figures refer to WSN defined as wireless mesh networks, considered self-healing and self-organizing. Wireless sensor networks will eventually enable the automatic monitoring of forest fires, avalanches, hurricanes, failure of country wide utility equipment, traffic, hospitals and much more over wide areas, something previously impossible. Current applications include automating meter readings in buildings, and manufacture and process control automation.

The market for non-mesh wireless sensor systems in general is far larger and some proposed standards apply to both. For example, in addition to the above, the market for real time locating systems is $0.38 billion in 2011 rising to $1.6 billion in 2021. 

Mesh WSN – status

According to IDTechEx, by far the biggest success of WSN has been in smart meters. Lesson number one – the governments can make things happen faster than industry. In many countries around the world governments have mandated that so called “smart meters” need to be installed in certain circumstances, such as new house builds or retrofits. More than 50 million have been installed so far. Now meter reading data is sent wirelessly, and the power is taken from the electricity supply so no batteries are needed. This is seen as a starting point to home automation – wireless sensors embedded in the house that will automatically communicate with the smart meter, a thermostat, etc. It is part of the smart grid activity. Here, the ZigBee protocol is being employed.

Lack of standards delays adoption

However, those that supply WSN need to be aware, said IDTechEx. There is no single standard that has emerged as a clear winner. Indeed, many so called standards are not – many companies implementing ZigBee, for exampl,e meet the basic criteria to use the ZigBee label but add further capability resulting in systems that are not interoperable with different sensors from different vendors. Many vendors, including giant system integrators that have their own proprietary wireless communications, hope that they may become the chosen default “standard”. A small number may win. The industry is not gearing towards a more collaborative approach to allow many to win. This in turn is putting off adoption. Would you install tens of thousands of wireless sensors in your plant locations if it was a proprietary solution? What if that company would not exist in five years?

This reads on to the lack of scalability – party due to lack of multi vendors sensors working together – but no-one has really tested many tens of thousands of mesh wireless sensor nodes. Theory suggests key network paths may form and if they are removed the system can slow down to unacceptable levels.

Delays

Another challenge that vendors need to address is that many only offer hardware. Adopters are often on their own for the software – which they need to make useful decisions on the data collected to give the system a payback. IDTechEx noted that in wireless sensing, the big successes are those that offer complete solutions. One example is Savi Technology, part of Lockheed Martin, that offer a full solution to asset tracking/visibility and the other is Ubisense, a successful UK company that has recently listed (and oversubscribed in doing so) based on a real time locating systems (RTLS) solution offering. Those selling only hardware now take note.

In addition, reducing the price and increasing the life of the nodes is key to the high volume applications.

Adoption forecasts

In the new IDTechEx report Wireless Sensor Networks 2011-2021, IDTechEx forecasts the market including how the average price per node will drop from $9 in 2011 per piece to $5 per piece in 2021. The report looks at the latest activity and sees how these challenges are being tackled.

U.S. leads; Asia is gaining

The USA dominates the development and use of WSN partly, IDtechEx said, because of the heavier funding available there. U.S. industry sits astride the computer industry thanks to companies such as Microsoft and IBM, and WSN is regarded as a next wave of computing, so U.S. industry is particularly interested to participate. The U.S. military, deeply interested in WSN, spends more than all other military forces combined. Creating and funding start-ups is comparatively easy in the USA. IDTechEx has profiled the main players in WSN, and location by country is shown below.

Watch the governments

It was the governments that created the first killer market for wireless sensors in smart meters, even though in reality most do not use the wireless features of the smart meters yet. U.S. military budgets have spent more than $1.5 billion on RTLS/sensor asset tracking solutions. Industry usually prioritises rapid payback, Governments don’t always have to as they seek better security, safety, longer term efficiency etc. One such new project in Europe is “Living planIT,” focused on making smarter cities; 22% of the global population lives in 600 major sized cities, representing 50% of the global GDP. Improving quality of life is therefore a very important challenge but also represents a great opportunity for sustainable technologies. Living PlanIT's aim is to create an ICT platform through aggregating existing and proven technologies that will be blended into real estate development. That would have as a prerequisite to embed technology (such as wireless sensors) into the construction process rather than rely on retrofitting which becomes more cost intensive.

In the first wave of the project, 2,897,640 sensors will be embedded in Living PlanIT's "test-city" in Portugal. Requirements for these include standardization, open API, horizontal integration but also, zero maintenance for embedded sensors that would have to meet lifetime expectations of over 30 years. Living PlanIT will be presenting at the IDTechEx event “Wireless Sensor Networks USA 2011” in Boston, USA on November 15-16 (http://www.IDTechEx.com/Boston), covering the latest technologies and adoption, and end-users needs and perspectives.

www.idtechex.com 

IDTechEx

- Edited by Chris Vavra, Control Engineering, www.controleng.com



No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2013 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Leaders Under 40 program features outstanding young people who are making a difference in manufacturing. View the 2013 Leaders here.
The new control room: It's got all the bells and whistles - and alarms, too; Remote maintenance; Specifying VFDs
2014 forecast issue: To serve and to manufacture - Veterans will bring skill and discipline to the plant floor if we can find a way to get them there.
2013 Top Plant: Lincoln Electric Company, Cleveland, Ohio
Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Plant Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.

Bring focus to PLC programming: 5 things to avoid in putting your system together; Managing the DCS upgrade; PLM upgrade: a step-by-step approach
Balancing the bagging triangle; PID tuning improves process efficiency; Standardizing control room HMIs
Commissioning electrical systems in mission critical facilities; Anticipating the Smart Grid; Mitigating arc flash hazards in medium-voltage switchgear; Comparing generator sizing software

Annual Salary Survey

Participate in the 2013 Salary Survey

In a year when manufacturing continued to lead the economic rebound, it makes sense that plant manager bonuses rebounded. Plant Engineering’s annual Salary Survey shows both wages and bonuses rose in 2012 after a retreat the year before.

Average salary across all job titles for plant floor management rose 3.5% to $95,446, and bonus compensation jumped to $15,162, a 4.2% increase from the 2010 level and double the 2011 total, which showed a sharp drop in bonus.

2012 Salary Survey Analysis

2012 Salary Survey Results

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.