Wireless market to top $1.1B by 2012: ARC

Wireless process sensor market expected to lead charge; new standards will have an impact

04/11/2008


The market for wireless devices and equipment in process manufacturing will grow to over $1.1billion in 2012, a growth rate of 32% per year, according to a new ARC Advisory Group study “ Wireless in Process Manufacturing Worldwide Outlook ” . The data in this study is from 2007 and includes a forecast of market growth through the year 2012.

The market will also change its character during the period, as new standardized wireless sensing products and hardened wireless local area networks penetrate the process market., and because the presence of dangerous and potentially explosive materials mandates use of equipment carrying special certifications.

Wireless process sensing is expected to be the fastest growing market segment. Today it accounts for only a small portion of the total market, but according to ARC, it will become the largest segment during the next five years, as the market absorbs a deluge of new wireless sensing products that comply with wireless versions of industrial standards.
Two industrial networking standards, WirelessHART and ISA100 , both use the same sensor radio hardware as the ZigBee standard, but with their own software.

Wireless LAN use will also grow rapidly, spurred by the introduction of new access point products that can safely be installed in the hazardous environments that may be present in such plants.

“Manufacturers in the process industries know that they need better visibility into operations that occur inside their own fence,” said Harry Forbes, Senior Analyst at Boston-based ARC Advisory Group. “ARC’s end user research indicates that manufacturers believe better visibility has huge potential value in the form of more consistent use of best practices, higher plant utilization, and improved operational safety.”

For more information on this study, go to: www.arcweb.com/res/wireless





No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
IIoT grows up; Six ways to lower IIoT costs; Six mobile safety strategies; 2017 Salary Survey
2016 Top Plant; 2016 Best Practices on manufacturing progress, efficiency, safety
2016 Product of the Year; Diagnose bearing failures; Asset performance management; Testing dust collector performance measures
Future of oil and gas projects; Reservoir models; The importance of SCADA to oil and gas
Big Data and bigger solutions; Tablet technologies; SCADA developments
SCADA at the junction, Managing risk through maintenance, Moving at the speed of data
What controller fits your application; Permanent magnet motors; Chemical manufacturer tames alarm management; Taking steps in a new direction
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
Package boilers; Natural gas infrared heating; Thermal treasure; Standby generation; Natural gas supports green efforts

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Motion control advances and solutions can help with machine control, automated control on assembly lines, integration of robotics and automation, and machine safety.
This article collection contains several articles on the vital role of plant safety and offers advice on best practices.
This article collection contains several articles on preventing compressed air leaks and centrifugal air compressor basics and best practices for the "fifth utility" in manufacturing plants.
Maintenance Manager; California Oils Corp.
Associate, Electrical Engineering; Wood Harbinger
Control Systems Engineer; Robert Bosch Corp.
click me