What is a "sanitary" device?


Dear Control Engineering: One of the things I see regularly in your new product listings are devices that are designated as “sanitary,” for use in food and pharmaceutical applications. What does that mean?

Manufacturing plants that produce food and pharmaceutical products are concerned about bad things growing in a manufacturing environment that could make it into the final product and cause contamination. Such things can make consumers sick or even dead, so we should all be glad such concerns exist. There are many organizations that oversee food and pharmaceutical manufacturing, depending on the specific segment. For example, there is the U.S. FDA, various departments of agriculture, and local health departments.

These groups use standards for hardware configuration and production practices that describe in extraordinary detail exactly what the equipment should look like and materials of construction. One such group is the International Association of Food Industry Suppliers (IAFIS), which is connected to the 3-A Sanitary Standards organization. These standards describe how equipment is to be made such that it can be adequately sanitized in cleaning processes, and not provide a breeding ground for bacteria and other bugs that can contaminate products. The standards touch on many key points:

• Appropriate materials, e.g., stainless steel and various plastics;
• Cleanable surface finishes;
• Absence of internal cracks, crevices, threads, and pockets;
• Welding specifications, and so forth.

These standards and practices came out of the dairy industry originally, but have now been adopted for many applications with similar concerns.

A sanitary temperature sensor (left).Devices, such as temperature transmitters or pressure sensors, that are made to be inserted into process piping or tanks, normally use the same kinds of fittings as the pipes themselves. This tri-clamp system uses a pair of tapered flanges on the end of the pipe or device that mate with a gasket and external clamp. This approach ensures an effective seal, but one that can be disassembled easily and minimizes any possibility of breeding contamination.

In the photo, the device on the left is designed for sanitary insertion and built in compliance with the relevant 3-A requirements. If you looked at the underside of the flange, you would see that it has a very fine surface finish, the point where the probe joins the flange has a smooth fillet, and an appropriate grade of stainless steel is used. The key point is that the device cannot become a source of contamination.

--Peter Welander, pwelander@cfemedia.com

No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Safety for 18 years, warehouse maintenance tips, Ethernet and the IIoT, GAMS 2016 recap
2016 Engineering Leaders Under 40; Future vision: Where is manufacturing headed?; Electrical distribution, redefined
Strategic outsourcing delivers efficiency; Sleeve bearing clearance; Causes of water hammer; Improve air quality; Maintenance safety; GAMS preview
SCADA at the junction, Managing risk through maintenance, Moving at the speed of data
Safety at every angle, Big Data's impact on operations, bridging the skills gap
The digital oilfield: Utilizing Big Data can yield big savings; Virtualization a real solution; Tracking SIS performance
Applying network redundancy; Overcoming loop tuning challenges; PID control and networks
Driving motor efficiency; Preventing arc flash in mission critical facilities; Integrating alternative power and existing electrical systems
Package boilers; Natural gas infrared heating; Thermal treasure; Standby generation; Natural gas supports green efforts

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This article collection contains several articles on the vital role of plant safety and offers advice on best practices.
This article collection contains several articles on the Industrial Internet of Things (IIoT) and how it is transforming manufacturing.
This article collection contains several articles on strategic maintenance and understanding all the parts of your plant.
click me