What did we learn about the business cycle From SPS/IPC/Drives in 2011?

Factory automation insiders believe, in spite of recent economic troubles in Europe, that the FA industry will remain strong, though perhaps growth may be reduced.

12/19/2011


The two main factory automation (FA) shows of the year, SPS and Hannover, provide an excellent opportunity to gauge industry momentum at two fairly evenly separated points of the year. The most recent one, SPS Nürnberg, didn’t disappoint. The organizers, Mesago, boasted substantial visitor and exhibitor growth compared with 2010, and this was evident from walking around. IMS Research attended with over 20 dedicated FA analysts, underlying our commitment to the show.

While our analysts met with a diverse array of attendees and exhibitors from around the world, our conversations were inevitably drawn to the economic and political events currently taking place in Europe. My concern going was that our discussions would highlight industry growth for FA equipment is entering a notable slowdown, and even worse, that this could be a precursor for another contraction. General sentiment, however, alleviated this concern (at least for now). Discussions regarding future order books suggested a softening in the fourth quarter, after what has been three very strong quarters of growth for FA equipment during 2011. Further, while most conversations about 2012 contained caveats in case of a possible Euro melt-down, in general people were projecting growth for 2012, if not somewhat moderated, versus what has been an extraordinary growth year for FA equipment in 2011. One vendor summed it up quite well “what we’re reading in the newspapers doesn’t correlate with what we’re seeing in our order books”.

If one examines revenues reported by publicly operated automation equipment entities as we do as part of our IAEE report, we can see that revenues for European-based vendors on a quarter-to-quarter basis actually contracted during the third quarter. The quarterly signal (the blue series in the accompanying chart) is a noisy one, and really the rolling annual average presents a better barometer of where we are. Clearly revenues peaked in the second quarter, but the last four quarters were 16.7% improved over the equivalent timeframe a year earlier. This doesn’t provide us the forward looking information we’d really like to have, but if one factors in the insight discussed above, a soft fourth quarter followed by a moderated growth profile would represent good news for automation equipment vendors. What is our current forecast for 2012? 10.2% in Europe and 12.1% globally. An upcoming blog authored by our machinery production expert Andrew Robertson should add some insight to our position.

Graph highlighting the Industrial Automation Electronic Equipment (IAEE) Automation Index from 1Q 2009 to 3Q 2011. Courtesy: IMS Research



No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
2016 Product of the Year; Diagnose bearing failures; Asset performance management; Testing dust collector performance measures
Safety for 18 years, warehouse maintenance tips, Ethernet and the IIoT, GAMS 2016 recap
2016 Engineering Leaders Under 40; Future vision: Where is manufacturing headed?; Electrical distribution, redefined
SCADA at the junction, Managing risk through maintenance, Moving at the speed of data
Safety at every angle, Big Data's impact on operations, bridging the skills gap
The digital oilfield: Utilizing Big Data can yield big savings; Virtualization a real solution; Tracking SIS performance
Applying network redundancy; Overcoming loop tuning challenges; PID control and networks
Driving motor efficiency; Preventing arc flash in mission critical facilities; Integrating alternative power and existing electrical systems
Package boilers; Natural gas infrared heating; Thermal treasure; Standby generation; Natural gas supports green efforts

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This article collection contains several articles on the vital role of plant safety and offers advice on best practices.
This article collection contains several articles on the Industrial Internet of Things (IIoT) and how it is transforming manufacturing.
This article collection contains several articles on strategic maintenance and understanding all the parts of your plant.
click me