The vision sensor is designed to inspect small features over a wide area and detect/inspect up to 1,500 parts per minute.
The Checker 232 model is designed to inspect small features over a wide area and detect/inspect up to 1,500 parts per minute. The vision sensor was developed specifically for applications where small features are being inspected on large parts, such as the inspection of clips and springs on large automotive assemblies. It also can be used where a much longer working distance is needed and the vision sensor must be mounted far from the area to be inspected.
There’s no limit to the number of part features that a single vision sensor can inspect. It uses multi-image analysis to determine if a part is present without an external trigger, greatly simplifying installation. This also enables the sensor to track parts in varying positions along the production line.
- Events & Awards
- Magazine Archives
- Oil & Gas Engineering
- Salary Survey
- Digital Reports
Annual Salary Survey
Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.
There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.
But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.
Read more: 2015 Salary Survey