Vending machine tampering: How serious?

Some of the world's best inventions are apt to trigger rash outbursts of temper. The computer that acts up, the telephone when it plays the numbers game, and the vending machine that fails to vend, to cite a small sampling.


Some of the world's best inventions are apt to trigger rash outbursts of temper. The computer that acts up, the telephone when it plays the numbers game, and the vending machine that fails to vend, to cite a small sampling.

You can swear at the computer and hang up the telephone, but what recourse have you when the vending machine doesn't produce after inserting your nickel -- uh, quarter, that is? Your natural inclination is to kick the machine or hammer it with your fist. Which prompts more than one company to classify vending machine abuse as a punishable offense.

Specifically, the company in question published in its manual that: "Tampering with vending machines on the premises will not be tolerated; employees guilty of this violation will be subject to suspension or discharge."

Night shift Utility Worker Jeff Gordon had his 85 cents investment and not this admonition in mind when the cafeteria's vending machine failed to eject the sandwich he had paid for. Pounding the machine didn't work; neither did kicking it. Nor did attempting to overcome its stubbornness with the aid of a pair of pliers and screw driver at which point night shift supervisor Bill Stolheim happened to pass by. When Gordon vented his frustration, Stolheim instructed him to put in for a refund.

"What you're doing is in violation of the contract and subject to discipline."

"Joe Feeny put in for a refund 2-mo ago and still hasn't got it."

"He'll get it and so will you. The 85 cents isn't gonna break you."

The supervisor moved on and Gordon went back to work -- until Stolheim was out of sight. He then returned to the vending machine with screwdriver and pliers. When Stolheim caught him the second time he informed him curtly, "That's it, Gordon, you're through!"

Gordon appealed the discharge as "too severe for the offense."

Question: Do you think Gordon deserves to be fired?

Malcam's verdict: "Reduce the penalty to a 1-wk suspension," Plant Engineer Ed Malcalm instructed Stolheim. "There's no question he was in violation, but the purpose of that contract clause is more to prevent stealing than discourage the venting of frustration. Include on the suspension notice that any repetition of tampering will result in dismissal."

No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Safety for 18 years, warehouse maintenance tips, Ethernet and the IIoT, GAMS 2016 recap
2016 Engineering Leaders Under 40; Future vision: Where is manufacturing headed?; Electrical distribution, redefined
Strategic outsourcing delivers efficiency; Sleeve bearing clearance; Causes of water hammer; Improve air quality; Maintenance safety; GAMS preview
SCADA at the junction, Managing risk through maintenance, Moving at the speed of data
Safety at every angle, Big Data's impact on operations, bridging the skills gap
The digital oilfield: Utilizing Big Data can yield big savings; Virtualization a real solution; Tracking SIS performance
Applying network redundancy; Overcoming loop tuning challenges; PID control and networks
Driving motor efficiency; Preventing arc flash in mission critical facilities; Integrating alternative power and existing electrical systems
Package boilers; Natural gas infrared heating; Thermal treasure; Standby generation; Natural gas supports green efforts

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This article collection contains several articles on the vital role of plant safety and offers advice on best practices.
This article collection contains several articles on the Industrial Internet of Things (IIoT) and how it is transforming manufacturing.
This article collection contains several articles on strategic maintenance and understanding all the parts of your plant.
click me