USBIC advisory: Domestic manufacturers say new Democratic trade bill will stem foreign trade cheating; key loopholes remain

07/22/2008


U.S. Business and Industry Council (USBIC) recommended quick passage of a new bill introduced by senior House Democrats to improve the enforcement of U.S. trade agreements and trade laws. But the Council, most of whose 1,550 members are small and midsize manufacturers, added that several provisions should be tightened still further. And Council President Kevin L. Kearns emphasized that more fundamental changes are urgently needed to turn U.S. trade policy into an engine of domestic growth and higher living standards for all Americans once again.
The Trade Enforcement Act of 2008, sponsored by House Ways and Means Committee Chairman Charles Rangel (D.-N.Y.) and Rep. Sander Levin (D.-Mich), chairman of the Ways and Means Trade Subcommittee:
(1) Eliminates some barriers to the use of U.S. trade laws meant to protect American producers from predatory foreign trade practices—especially those engaged in by China and other Nonmarket Economies;
(2) Establishes new sanctions for imports that endanger Americans’ health and safety; and
(3) Creates new government offices to use World Trade Organization dispute-settlement mechanisms more effectively; monitor and respond more actively to foreign trade barriers and other predatory practices; and improve protection of U.S. intellectual property rights.
According to Kearns, “The Rangel-Levin bill contains many useful ideas for helping American victims of foreign trade cheating gain the protection and compensation they deserve. These provisions are essential for maintaining a world-class productive base in America. The bill would also finally require the U.S. government to oppose the World Trade Organization’s longstanding campaign to expand its powers over sovereign governments illegally, and to weaken U.S. trade laws unjustifiably.”
Yet Kearns observed that the bill leaves important enforcement gaps in U.S. trade policy, and that the Council looks forward to working with the bill’s sponsors to address them. For example, the bill increases Congress’ authority over the U.S. Trade Representative’s agenda for eliminating individual foreign nontariff trade barriers. It also creates a new Congressional Trade Enforcer to conduct its own investigations into these barriers and trigger Executive Branch action. Yet Kearns noted that any use of sanctions to secure trade diplomacy goals vis-a-vis WTO members—including the bill’s restoration of the Super 301 procedure—can still be overturned by the WTO’s dispute-resolution process.
Similarly, the creation of a new General Counsel for the Trade Representatives’ office does not per se guarantee that the United States will file more cases at the World Trade Organization, nor that America’s WTO case record will improve. Kearns described as “laudable and overdue” the bill’s efforts to halt the WTO’s overreaching and to strengthen U.S. trade remedies. Such proposals could be valuable in preventing U.S. trade negotiators from agreeing to further restrictions on U.S. trade laws at the current Doha Round of world trade talks, Kearns said.
Yet he noted that the bill does not change the United States’ lack of internationally recognized legal authority to nullify WTO dispute-resolution decisions or to change its procedures unilaterally. And while the bill does limit a president’s discretion in denying relief to domestic industries in China safeguard cases, the chief executive still retains considerable wiggle room.
Although the bill establishes new sanctions for enterprises whose products repeatedly violate U.S. health and safety laws, Kearns pointed out that the application of sanctions at the firm level could be circumvented by use of alternate suppliers and even shell companies %%MDASSML%% especially in countries with either threadbare or politicized legal systems like China. The same problem could undermine the bill’s Import Safety Program, which seeks to identify reliable importers and producers of goods that pose potential health and safety hazards, but which only reviews the records and performance of such companies every five years.
Kearns also noted that the biggest problems draining domestic manufacturers’ global competitiveness, fueling America’s dangerously high trade deficits, and undermining employees’ wages and benefits, remain unaddressed by Congress or the Administration.
Said Kearns, “Even if the Rangel-Levin bill becomes law, the imperative of sweeping trade policy overhaul will remain as strong as ever. Domestic companies and their employees are still being devastated by the NAFTA-spearheaded transformation of U.S. trade policy into an offshoring policy. They still face dynamic mercantilist systems throughout Europe and Asia, which routinely thwart the piecemeal, slow-moving approach of America’s trade law system. They still face discriminatory foreign Value-Added Tax arrangements, which may generate nearly half of the U.S. trade deficit. And they still face currency manipulation from China and Japan in particular.”
Kearns concluded, “The issue of currency manipulation is in the top tier of issues that America’s domestic manufacturers want addressed. The Ryan-Hunter currency manipulation bill should also be passed immediately as a companion measure to the Rangel-Levin measure. Then we’d be making some real progress.”





The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
A new approach to the Skills Gap; Community colleges may hold the key for manufacturing; 2017 Engineering Leaders Under 40
Doubling down on digital manufacturing; Data driving predictive maintenance; Electric motors and generators; Rewarding operational improvement
2017 Lubrication Guide; Software tools; Microgrids and energy strategies; Use robots effectively
The cloud, mobility, and remote operations; SCADA and contextual mobility; Custom UPS empowering a secure pipeline
Infrastructure for natural gas expansion; Artificial lift methods; Disruptive technology and fugitive gas emissions
Mobility as the means to offshore innovation; Preventing another Deepwater Horizon; ROVs as subsea robots; SCADA and the radio spectrum
Power system design for high-performance buildings; mitigating arc flash hazards
Research team developing Tesla coil designs; Implementing wireless process sensing
Commissioning electrical systems; Designing emergency and standby generator systems; Paralleling switchgear generator systems

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
Featured articles highlight technologies that enable the Industrial Internet of Things, IIoT-related products and strategies to get data more easily to the user.
This digital report will explore several aspects of how IIoT will transform manufacturing in the coming years.
Maintenance Manager; California Oils Corp.
Associate, Electrical Engineering; Wood Harbinger
Control Systems Engineer; Robert Bosch Corp.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me