U.S. manufacturing vibrant, claims economist at CSIA conference

The 2009 Control System Integrator Association Annual Executive Conference highlights the end of an era and reports some of the first signs of a pending economic upturn. Long-time executive director Norm O’Leary says this would be his last conference as host; Lynda Patterson, president, and Robert Lowe, executive director (photo in story) will lead.

04/30/2009



Naples, FL– This year’s Control System Integrator Association’s (CSIA) conference here began with an end. Long-time executive director Norm O’Leary officially announced that this would be his last conference as host.

Robert Lowe
Robert Lowe (photo, left; also president of Loman Control Systems ) replaces O'Leary as executive director, in addition to Lynda Patterson, who now serves in the recently created position of CSIA President.Lynda Patterson, CSIA president

Click here to read more about this change.


Overall attendance at this year’s meeting is flat compared to last year, following a continual rate of increase over the previous 15-year history of the organization’s annual conference. A flat level of attendance in difficult economic times, however, is major feat. O’Leary pointed out that other, similar-sized conferences—such as MESA —have cancelled events for this year.

Economist Alan Beaulieu of the Institute for Trend Research

As it has for the last two years, CSIA launched this year’s conference with a report from economist Alan Beaulieu of the Institute for Trend Research . Beaulieu correctly called the current recession—both in timing and severity—at least year’s conference to a somewhat stunned audience that had some difficulty digesting how tough the economic times into which we were headed would be.

Since his economic predictions have been so accurate, here’s a summary of what he had to say at this year’s conference:

  • Though industrial production remains at its lowest level in 30 years, we have not hit bottom yet. “The rate of decline is easing,” says Beaulieu, “but inventories are still higher than incoming orders. We remain six to eight months away from recovery. And that recovery will be mild. 2011, however, will be a good year economically.”

  • Despite the current deep recession, Beaulieu points out that the U.S. remains the world’s manufacturing powerhouse—outpacing China’s production capability by 2:1. The U.S. is also still the world’s leading exporter, ahead of Germany, China, Japan, and U.K. “Manufacturing in the U.S. is not dying,” he says. “We’re just doing more with less. Production is down now, but that is compared to the past few years when we saw the highest levels of production in the U.S. since World War II. We’re vibrant.”

  • Three of the eight indicators the Institute for Trend Research follows are showing positive signs. When five of those are positive, the Institute will consider a recovery to be underway. The three showing positive signs are: money supply is increasing; bond prices are rising; and the ISM Index, though still in contraction, has been gaining for 3 months straight.

  • In particular, Beaulieu predicts good growth for the food and beverage and medical device industries. He also predicts a rise in commodity prices over the next year or two, especially copper and oil, as economic pressures build with a revitalized economy. He also recommends investment in cement, steel, and construction machinery manufacturers, as they will be near-term beneficiaries of government infrastructure spending.

- CSIA offers more resources .

- Control Engineering covers system integration , provides the Automation Integrator Guide .

David Greenfield , editorial director

Control Engineering News Desk

Register here





No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Your leaks start here: Take a disciplined approach with your hydraulic system; U.S. presence at Hannover Messe a rousing success
Hannover Messe 2016: Taking hold of the future - Partner Country status spotlights U.S. manufacturing; Honoring manufacturing excellence: The 2015 Product of the Year Winners
Inside IIoT: How technology, strategy can improve your operation; Dry media or web scrubber?; Six steps to design a PM program
Getting to the bottom of subsea repairs: Older pipelines need more attention, and operators need a repair strategy; OTC preview; Offshore production difficult - and crucial
Digital oilfields: Integrated HMI/SCADA systems enable smarter data acquisition; Real-world impact of simulation; Electric actuator technology prospers in production fields
Special report: U.S. natural gas; LNG transport technologies evolve to meet market demand; Understanding new methane regulations; Predictive maintenance for gas pipeline compressors
Warehouse winter comfort: The HTHV solution; Cooling with natural gas; Plastics industry booming
Managing automation upgrades, retrofits; Making technical, business sense; Ensuring network cyber security
Designing generator systems; Using online commissioning tools; Selective coordination best practices

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This article collection contains several articles on the vital role that compressed air plays in manufacturing plants.
This article collection contains several articles on the Industrial Internet of Things (IIoT) and how it is transforming manufacturing.
This article collection contains several articles on strategic maintenance and understanding all the parts of your plant.
click me