U.S. construction spending falls on slump in commercial projects

Nonresidential construction dropped 6.9% in January, partly due to winter storms, tight credit and high vacancy rates.

03/04/2011


Construction projectConstruction spending in the U.S. fell more than forecasted in January, paced by the biggest slump in commercial projects in 17 years, showing that the industry will continue to be a laggard in the economic recovery.

The 0.7% drop brought the value of all projects down to a $791.8 billion annual rate, the lowest since August, according to the U.S. Dept. of Commerce. Outlays on private non-residential works dropped 6.9%, the most since January 1994, which may reflect the influence of winter storms. This January was the fifth snowiest January in 45 years of satellite coverage, according to the National Climatic Data Center.

Construction of power plants, hospitals, hotels, and office buildings dropped during the month as tight credit and high vacancy rates restrained investment.

“Office vacancies are high and consumer spending is weak, making the need to expand into shopping centers fairly limited,” Neill Dutta, an economist at Bank of America Merrill Lynch Global Research in New York, said before the report.

Private construction spending fell 1.2% in January from the prior month. Spending on public construction fell 0.1%, the report said. Federal construction spending increased 9.1%.

Government agencies are under pressure to cut spending. States are projecting $125 billion of budget deficits in fiscal 2012 and will lose most federal stimulus funds this year, the Washington-based Center on Budget and Policy Priorities said in a Jan. 21 report.

The Dept. of Commerce also revised the December reading up to a 1.6% drop from a previously estimated decline of 2.5%.

- Edited by Bettina Chang, Consulting-Specifying Engineer, www.csemag.com



No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
IIoT grows up; Six ways to lower IIoT costs; Six mobile safety strategies; 2017 Salary Survey
2016 Top Plant; 2016 Best Practices on manufacturing progress, efficiency, safety
2016 Product of the Year; Diagnose bearing failures; Asset performance management; Testing dust collector performance measures
Future of oil and gas projects; Reservoir models; The importance of SCADA to oil and gas
Big Data and bigger solutions; Tablet technologies; SCADA developments
SCADA at the junction, Managing risk through maintenance, Moving at the speed of data
What controller fits your application; Permanent magnet motors; Chemical manufacturer tames alarm management; Taking steps in a new direction
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
Package boilers; Natural gas infrared heating; Thermal treasure; Standby generation; Natural gas supports green efforts

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Motion control advances and solutions can help with machine control, automated control on assembly lines, integration of robotics and automation, and machine safety.
This article collection contains several articles on the vital role of plant safety and offers advice on best practices.
This article collection contains several articles on preventing compressed air leaks and centrifugal air compressor basics and best practices for the "fifth utility" in manufacturing plants.
Maintenance Manager; California Oils Corp.
Associate, Electrical Engineering; Wood Harbinger
Control Systems Engineer; Robert Bosch Corp.
click me