Union: Make the refinery safer, or we’ll walk

The United Steelworkers have threatened to strike at 69 oil refineries in the U.S. unless stricter safety procedures at plants and pipelines are adopted


If oil companies don’t agree to stricter safety procedures at plants and pipelines, the union representing employees at 69 U.S. oil refineries said it will strike.

The United Steelworkers (USW), which failed during contract negotiations in 2009 to get companies to agree to have a union-trained safety specialist at each refinery, will make a similar demand during talks that begin in January for a new three-year pact, said Gary Beevers, a USW representative.

About 300 delegates to the union’s annual oil bargaining conference in Dallas approved a bargaining policy for contract talks with the companies.

“We were not in a position to strike the last time because the recession told us we couldn’t do that to the American public,” Beevers said. “We’re still not where we need to be economically, but the companies’ margins are better. We’re either going to get some changes in health and safety or we’re going to have a strike.”

Refinery and pipeline union members, which number about 30,000, haven’t struck since 1980, when a work stoppage lasted three months. A strike would affect almost two-thirds of U.S. refining capacity, according to union research.

During the last contract talks in 2009, the union accepted higher wages while relenting on new safety provisions. The three-year agreement included 3 percent annual raises and $2,500 bonuses.

The union pointed out incidents that safety training could have prevented. One was the chemical explosion at Tesoro Corp.’s Anacortes, WA, refinery on April 2, 2010, that killed seven people, the deadliest accident at a U.S. plant since 2005.

Five percent of U.S. refineries had significant incidents in the previous two years, Robert Hall, the U.S. Chemical Safety and Hazard Investigation Board’s lead Anacortes investigator, said on April 5, 2010.

“We always ask for better wages but we’re tired of taking chances with people’s lives,” Beevers said.

The policy, agreed upon unanimously by the delegates to the bargaining conference, went out this week to local unions representing workers at refineries and pipeline units. Ratification by 75 percent of the locals must occur within 45 days for the policy to become the official position for negotiating a new three-year contract with employers.

Most of the local contracts expire Jan. 31 and the rest later in the year. Talks should begin in January with Royal Dutch Shell, which will bargain on behalf of companies including Exxon Mobil Corp., ConocoPhillips and Valero Energy Corp. If approved, a deal between Shell and the USW will become the pattern used to negotiate local contracts.

- Edited by Chris Vavra, Plant Engineering, www.plantengineering.com 

No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2013 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
A cool solution: Collaboration, chemistry leads to foundry coat product development; See the 2015 Product of the Year Finalists
Raising the standard: What's new with NFPA 70E; A global view of manufacturing; Maintenance data; Fit bearings properly
Sister act: Building on their father's legacy, a new generation moves Bales Metal Surface Solutions forward; Meet the 2015 Engineering Leaders Under 40
Cyber security cost-efficient for industrial control systems; Extracting full value from operational data; Managing cyber security risks
Drilling for Big Data: Managing the flow of information; Big data drilldown series: Challenge and opportunity; OT to IT: Creating a circle of improvement; Industry loses best workers, again
Pipeline vulnerabilities? Securing hydrocarbon transit; Predictive analytics hit the mainstream; Dirty pipelines decrease flow, production—pig your line; Ensuring pipeline physical and cyber security
Upgrading secondary control systems; Keeping enclosures conditioned; Diagnostics increase equipment uptime; Mechatronics simplifies machine design
Designing positive-energy buildings; Ensuring power quality; Complying with NFPA 110; Minimizing arc flash hazards
Building high availability into industrial computers; Of key metrics and myth busting; The truth about five common VFD myths

Annual Salary Survey

After almost a decade of uncertainty, the confidence of plant floor managers is soaring. Even with a number of challenges and while implementing new technologies, there is a renewed sense of optimism among plant managers about their business and their future.

The respondents to the 2014 Plant Engineering Salary Survey come from throughout the U.S. and serve a variety of industries, but they are uniform in their optimism about manufacturing. This year’s survey found 79% consider manufacturing a secure career. That’s up from 75% in 2013 and significantly higher than the 63% figure when Plant Engineering first started asking that question a decade ago.

Read more: 2014 Salary Survey: Confidence rises amid the challenges

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.