Uncommon side: The hoodwinked employee -- Part I

Chief Engineer Joel Shifron was dismayed when he heard through the grapevine that Group Leader Vince Russo had all but decided to accept a job offer from a competitive firm. Russo was a guy he couldn't afford to lose.

09/01/1999


Chief Engineer Joel Shifron was dismayed when he heard through the grapevine that Group Leader Vince Russo had all but decided to accept a job offer from a competitive firm. Russo was a guy he couldn't afford to lose. Confronting the engineer with the rumor, Shifron asked if it was true.

Russo admitted it was. "You can't blame a guy for trying to better himself," he replied.

"That's true, but management has big things in store for you." The chief did his best to dissuade him, but Russo had apparently made up his mind.

"Do me a favor," Shifron asked. "Don't tell them you'll take the job until I have a chance to discuss it with Harry."

Russo reluctantly agreed to hold off for a short time. That afternoon, Shifron called him to the conference room. Jeff Balsam, his assistant, was also present.

"I have good news, Vince. The boss agreed to go along with a 15% raise, effective at once."

"I dunno," Russo said, "It's not the money. The executive who interviewed me assured me that I would make senior engineer within a year."

"I don't think that's a problem," Shifron said. "Just hold on a little longer."

Shifron huddled again with Plant Engineer Harry Boggs, and returned to give Russo the same assurance about making senior engineer within a year.

Russo seemed to be wavering. "Why shoot crap with your career?" Shifron reasoned. "What you have here is a sure thing. Your job is good for life. Management has plans for you. With a new job, you never can tell. It could blow up in your face."

Russo let out a breath. "Fifteen percent? And Harry is serious about making me senior?"

"That's what he said," Balsam chimed in. "I was there."

"Ok, then you're stuck with me."

But in weeks to come, the company's fortunes went downhill. Russo's work output fell off as well, along with performance throughout the department. He received a termination notice 6-mo later.

Russo was stunned. "You said I would make senior in a year, and that my job was good for life."

"Maybe so," Shifron countered. "But this was automatically predicated on sustaining an acceptable level of performance. Your productivity fell below standard."

"That's a crock," Russo replied. "Since the volume of work fell off, there was nothing I could do." He threatened to sue for breach of promise.

Question: How do you rate Russo's chances of winning the suit?





No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
2017 Lubrication Guide; Software tools; Microgrids and energy strategies; Use robots effectively
Prescriptive maintenance; Hannover Messe 2017 recap; Reduce welding errors
Safety standards and electrical test instruments; Product of the Year winners; Easy and safe electrical design
Infrastructure for natural gas expansion; Artificial lift methods; Disruptive technology and fugitive gas emissions
Mobility as the means to offshore innovation; Preventing another Deepwater Horizon; ROVs as subsea robots; SCADA and the radio spectrum
Future of oil and gas projects; Reservoir models; The importance of SCADA to oil and gas
Diagnostic functions for system safety; Specifying industrial enclosures; Effective decision support for a crisis
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Natural gas for tomorrow's fleets; Colleges and universities moving to CHP; Power and steam and frozen foods

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
Featured articles highlight technologies that enable the Industrial Internet of Things, IIoT-related products and strategies to get data more easily to the user.
This digital report will explore several aspects of how IIoT will transform manufacturing in the coming years.
Maintenance Manager; California Oils Corp.
Associate, Electrical Engineering; Wood Harbinger
Control Systems Engineer; Robert Bosch Corp.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me