UK PV module price watch - Supply chain prices respond to feed-in tariff chaos

Although the UK saw record demand for PV modules up until the December 12th Feed-in tariff cut, on average December saw module prices in the UK decline in response to the heavy cuts that took place, albeit temporarily.

01/11/2012


Although the high court ruled that the changes to tariff were unlawful just over a week later and reversed the cuts; confusion over what the decision means for the industry, mixed with slow demand due to the Christmas break, means that prices have not yet had a chance to re-adjust to the news that the previous highly generous incentive levels appear to be on offer again - for the time being.

Average Supplier Prices Decline

Although December’s FiT cut forced some to pay inflated prices to secure modules via distributors before the FiT deadline, average prices for modules purchased direct from manufacturers declined by 6% over November’s level. The decline came as prices were adjusted to reflect the planned new incentive levels, and distributors and wholesalers cleared stock levels in anticipation of demand evaporating after the FiT cut.

Chart highlighting PV module market prices from the manufacturer. Courtesy: IMS Research

Chinese Tier-2 Pricing Declines to £0.66/W

Given the huge oversupply of PV modules that currently plagues the global PV industry; a spike in demand in the UK offered suppliers around the globe a much welcome opportunity to shift some of their bulging inventories and often at very attractive prices for their customers. This was particularly the case for Chinese Tier-2 manufacturers, who offered crystalline PV modules as low as £0.50/W during December, and average prices for these modules (purchased direct from manufacturers) fell to just £0.66/W during the month.

Despite declining by 15% in December, average crystalline module pricing direct from Japanese manufacturers remained significantly above their competition and over 30% higher than the market average. The long standing high-quality reputation of Japanese suppliers as well as the popularity of high efficiency products (e.g. Sanyo’s HIT module) in small roof-top installations which dominate the UK market, has allowed them to command a premium price.

Chart highlighting UK crystalline PV module market prices from the manufacturer. Courtesy: IMS Research

Rush to Purchase Modules Causes Spike in Distributor Pricing

Distributor pricing remained close to 25% higher than direct-manufacturer pricing in December as installers for small projects continued to favour purchasing in small quantities from local distributors and supply struggled to meet demand.

Although average prices from both distributors and manufacturers declined in December, a desperate rush to complete installations prior to the December 12th deadline, combined with a relatively short supply, saw some customers paying extremely high prices. Prices as high as £2.76/W were recorded for small orders from distributors and the range of prices (difference between highest and lowest prices) offered by distributors increased from £1.39 in November to an incredible £2.16 in December. In comparison, the range of prices offered directly by manufacturers remained fairly stable, as their longer lead times (due to modules not generally being located within the UK) meant that they were less able to provide modules in time to install before the FiT cut.

Chart highlighting overall UK crystalline PV module market prices. Courtesy: IMS Research

Prices To Continue Declining in January – Or Perhaps Not?

The pricing survey also asked respondents how they expected January’s prices to compare to December’s. As the majority of responses were received before the FiT cut was reversed, it is not surprising that the overwhelming majority were expecting prices to continue declining in January. Over 90% of survey respondents were expecting prices to decline in January, with almost 80% anticipating that prices would decline by over 5%. A weighted average of all responses suggests that average prices will decline by 5.5%, making average crystalline manufacturer prices around £0.82/W in January.

At the time of writing this article (January 3rd 2012), the industry is not only experiencing the same ‘first few days back after Christmas’ calm as many industries, but demand is currently stalled by confusion over what the high court’s ruling means for the industry - rather than the low tariff rates that people had previously expected would put the brakes on the market. As the month goes on, clarity will hopefully be restored and demand is likely to return, although some nerves from potential investors over future changes will prevent it reaching the levels that it did in November and early December. As end of year incentive reductions in other major European markets have pushed module prices in Europe lower still, prices in the UK are still predicted to decline this month. 

Chart highlighting overall predicted price increase/decrease in PV modules for January 2012. Courtesy: IMS Research

Profile photo of Sam Wilkinson, a senior market research analyst for IMS Research who specializes in the photovoltaics (PV) market. Courtesy: IMS ResearchJanuary and February will certainly be important months for the UK PV industry as it attempts to adjust once again to the ever changing business environment that relying on government subsidy schemes inevitably brings, and with volatile demand will almost certainly come volatile pricing!



No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2013 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Leaders Under 40 program features outstanding young people who are making a difference in manufacturing. View the 2013 Leaders here.
The new control room: It's got all the bells and whistles - and alarms, too; Remote maintenance; Specifying VFDs
2014 forecast issue: To serve and to manufacture - Veterans will bring skill and discipline to the plant floor if we can find a way to get them there.
2013 Top Plant: Lincoln Electric Company, Cleveland, Ohio
Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Plant Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.

Why manufacturers need to see energy in a different light: Current approaches to energy management yield quick savings, but leave plant managers searching for ways of improving on those early gains.
Electric motor power measurement and analysis: Understand the basics to drive greater efficiency; Selecting the right control chart; Linear position sensors gain acceptance
Protecting standby generators for mission critical facilities; Selecting energy-efficient transformers; Integrating power monitoring systems; Mitigating harmonics in electrical systems

Annual Salary Survey

Participate in the 2013 Salary Survey

In a year when manufacturing continued to lead the economic rebound, it makes sense that plant manager bonuses rebounded. Plant Engineering’s annual Salary Survey shows both wages and bonuses rose in 2012 after a retreat the year before.

Average salary across all job titles for plant floor management rose 3.5% to $95,446, and bonus compensation jumped to $15,162, a 4.2% increase from the 2010 level and double the 2011 total, which showed a sharp drop in bonus.

2012 Salary Survey Analysis

2012 Salary Survey Results

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.