UK Government on solar back foot - Tariff confusion continues

With feed-in tariffs (FiT) declared illegal by the UK's High Court, the PV market is in a state of flux with one of its major assets no longer being a factor.

01/26/2012


The UK’s High Court today declared the Governments cuts to feed-in tariffs (FiTs) paid to owners of solar Photovoltaic (PV) systems illegal and reversed the cuts to payments to their original levels. This latest development is likely to cause further confusion amongst the industry and prevent homeowners and businesses from fully understanding the potential risks and rewards of installing their own solar PV systems.

When the UK’s FiT was first introduced in early 2010, it led to a slow, but steady increase in the number of PV systems being deployed in the country. The FiT payments effectively subsidise the several thousand pound investment, by paying owners a guaranteed, and inflating-linked payment for every unit of electricity generated by their systems. In 2011, however, the market quickly gathered pace, driven by rapidly falling PV system prices as a result of huge oversupply largely coming from Chinese solar panel manufacturers and also slowing demand in other major markets in countries like Germany. Factory-gate panel prices fell by more than 30% in 2011 according to latest data from IMS Research.

When DECC realized that deployment was growing at a rate much quicker than anticipated and that the budget set aside for FiT payments would quickly be used up, it announced in October that FiT payments would be more than halved for any PV system installed after 12th December. Crucially, however, the Government 12th December deadline was in fact before the end of the consultation process on the proposed cuts, which ended on December 23rd. It was for this reason that the High Court today ruled the cuts illegal.

Ironically, it was the Government’s decision to cut FiT payments that lead to further overheating of the UK market and a rapid acceleration of PV systems being built. The announcement in October was followed by a flurry of new applications as savvy homeowners and businesses sought to install systems and beat the deadline. This led to 800 MW of new PV capacity being added in the UK in 2011, according to IMS Research, up from just 50 MW in 2010. This propelled the UK to become the seventh largest market globally, despite being ranked just 20th in 2010. Given the UK’s new found importance in the global PV industry, any changes to the incentive mechanisms here are likely to have a profound effect on the global supply chain and could spark further oversupply, sending prices down further.

Whilst some in the industry may see today’s new positively, it will most likely spell more bad news and uncertainty. DECC has already indicated that it would seek to appeal to the Supreme Court which could then rule in its favour. This means that installers of PV systems currently offer any guarantees to homeowners looking to install solar PV systems how much money they will actually generate, and if it will actually provide a decent return on investment.

Profile photo of Ash Sharma, senior research director for photovolatics at IMS Research. Courtesy: IMS ResearchIf the Government were to lose a further appeal and rates remain unchanged, this could spell further danger to the UK industry. Paying inflated prices (which would be double those offered in Germany currently) would undoubtedly lead to further market overheating with a second rush of installations. Whilst this may provide short-term gain, it would likely create a boom-bust cycle which has been seen in other solar PV markets such as Spain and destroy the industry when all available budget is spent providing huge returns to some investors, but then nothing left for further installations.

With further price declines expected in early 2012, it seems obvious that FiTs in the UK needed to be reduced, but today’s latest twist will likely cause on-going confusion, uncertainty and could spell the end of the UK solar PV industry.



No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Hannover Messe 2016: Taking hold of the future - Partner Country status spotlights U.S. manufacturing; Honoring manufacturing excellence: The 2015 Product of the Year Winners
Inside IIoT: How technology, strategy can improve your operation; Dry media or web scrubber?; Six steps to design a PM program
World-class manufacturing: A recipe for success: Finding the right mix for a salad dressing line; 2015 Salary Survey: Manufacturing slump dims enthusiasm
Getting to the bottom of subsea repairs: Older pipelines need more attention, and operators need a repair strategy; OTC preview; Offshore production difficult - and crucial
Digital oilfields: Integrated HMI/SCADA systems enable smarter data acquisition; Real-world impact of simulation; Electric actuator technology prospers in production fields
Special report: U.S. natural gas; LNG transport technologies evolve to meet market demand; Understanding new methane regulations; Predictive maintenance for gas pipeline compressors
Warehouse winter comfort: The HTHV solution; Cooling with natural gas; Plastics industry booming
Managing automation upgrades, retrofits; Making technical, business sense; Ensuring network cyber security
Designing generator systems; Using online commissioning tools; Selective coordination best practices

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This article collection contains several articles on the vital role that compressed air plays in manufacturing plants.
This article collection contains several articles on the Industrial Internet of Things (IIoT) and how it is transforming manufacturing.
click me