Troubled employee? Handle with care

The only thing Project Leader Sam Norcross knew for sure was that Phil Potter's performance continued to decline. Every time he broached the subject, Potter, a bright young engineer, promised to improve, a promise he consistently broke.

08/01/1998


The only thing Project Leader Sam Norcross knew for sure was that Phil Potter's performance continued to decline. Every time he broached the subject, Potter, a bright young engineer, promised to improve, a promise he consistently broke.

When the supervisor tried to determine the reason for the decline, he hit a dead end. In response to his questions Potter assured him that nothing was wrong, he had no personal problems. Norcross didn't believe him. Something had to be wrong. He couldn't put his finger on what. But the Phil Potter on staff today was not the same guy who had been in his group for almost 2 yr now.

For one thing, he was drinking. Norcross had observed him several times at lunchtime downing booze at the bar where they ate. But he never had been drunk on the job, so he couldn't focus on that. Another thing: In the past Potter had been cheerful and friendly. In recent months he appeared grumpy and irritable as if it might hurt him to smile.

Something was troubling him, but Norcross couldn't figure out what.

Question : What, if anything, would you do in a similar situation?

Brill's counsel: Norcross discussed his concern with his boss. Plant Engineer Bob Brill listened thoughtfully as the project leader relayed his misgivings.

"It does look like something is wrong," he agreed. "A person doesn't suddenly change his skin like a lizard without some underlying cause.

"What to do about it, of course, is the question. My advice is to proceed gingerly. The safest approach in a situation like this is to discuss the job, not the man. In fact, that's all you have a right to discuss. Faulty work judgment, poor performance, and behavior affecting others in the department are legitimate subjects for discussion.

"Beyond that, you can suggest that Potter seek professional guidance if he needs it, even offer to help arrange it, but the one course not to take is to try to play psychologist yourself."





The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
Doubling down on digital manufacturing; Data driving predictive maintenance; Electric motors and generators; Rewarding operational improvement
2017 Lubrication Guide; Software tools; Microgrids and energy strategies; Use robots effectively
Prescriptive maintenance; Hannover Messe 2017 recap; Reduce welding errors
The cloud, mobility, and remote operations; SCADA and contextual mobility; Custom UPS empowering a secure pipeline
Infrastructure for natural gas expansion; Artificial lift methods; Disruptive technology and fugitive gas emissions
Mobility as the means to offshore innovation; Preventing another Deepwater Horizon; ROVs as subsea robots; SCADA and the radio spectrum
Research team developing Tesla coil designs; Implementing wireless process sensing
Commissioning electrical systems; Designing emergency and standby generator systems; Paralleling switchgear generator systems
Natural gas engines; New applications for fuel cells; Large engines become more efficient; Extending boiler life

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
Featured articles highlight technologies that enable the Industrial Internet of Things, IIoT-related products and strategies to get data more easily to the user.
This digital report will explore several aspects of how IIoT will transform manufacturing in the coming years.
Maintenance Manager; California Oils Corp.
Associate, Electrical Engineering; Wood Harbinger
Control Systems Engineer; Robert Bosch Corp.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me