Trends to watch this fall

Here are four key trends to watch for this fall and throughout 2014.

09/20/2013


Commercial buildingsAutumn typically is the start of a lot of things, including a new school year, the next season of a favorite TV show, and, in some cases, the company’s fiscal year. For publications such as this one, it typically means looking forward to the next year, and determining what trends or topics are going to be important to cover.

Following trends isn’t easy—if we knew what “the next big thing” would be, we’d all be wealthy because we’d invest wisely in the stock market. And absolutely no one can stay on top of every aspect of everything; it’s not physically possible to read, research, and retain that much information.

We can, however, get a very good grasp on trends by talking to key people from various backgrounds. For example, when I start to gather information about topics to cover in the next year, I work with three different groups: engineers, manufacturers, and associations. Sprinkle in a little research from external experts, and you have a snapshot of what’s happening in the industry.

Here are four key trends you should watch for:

1. Energy codes will dictate more and more of what engineers do, how they design a building or system, and what types of products they specify. ASHRAE Standard 90.1-2014 is about to be released, and other recognized codes/standards like International Green Construction Code (IgCC), ASHRAE Standard 189.1, and the International Energy Conservation Code are driving building engineering. Architecture 2030, the U.S. Green Building Council, and other organizations are driving efforts of the building sector to become more energy efficient.

2. LEDs will continue to overtake the lighting market. While LEDs (light-emitting diodes) have been around since the 1960s, they’re just now coming into their own in the commercial market. When we conduct research among our audience, LEDs typically fall high on the list of technologies they need to know more about. Lighting controls go hand-in-hand with LEDs, primarily because energy codes (see above) require low lighting power density and because owners demand more control over their building’s systems.

3. Integration of building systems is no longer a luxury for owners, it’s a requirement. For example, integrating fans and smoke control systems may seem quite obvious to many senior engineers, but for engineers just coming out of college or those with little knowledge of fire/life safety systems, it’s not always as apparent. Integrating lighting and HVAC systems also is important; by using building energy modeling software, engineers can determine how to size HVAC systems to balance the heat given off by lighting systems, particularly energy-efficient lighting fixtures (back to energy efficiency again).

4. The market for hospitals and health care facilities will continue to change, growing at a slightly slower pace due to the still-lagging economy. The recent changes to the U.S. health care laws will change the structure by which hospitals charge patients, which will change the way health care facilities are designed and managed. According to a February 2013 report from “Health Facilities Management”: “Health care organizations are investing less in megaprojects involving traditional hospitals and more in upgrades or additions designed to help them thrive under the Affordable Care Act (ACA), with its emphasis on accountability, affordability, and patient access. That means a greater focus on infrastructure and technology, hospital-physician integration, and outpatient facilities.”



No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
2016 Product of the Year; Diagnose bearing failures; Asset performance management; Testing dust collector performance measures
Safety for 18 years, warehouse maintenance tips, Ethernet and the IIoT, GAMS 2016 recap
2016 Engineering Leaders Under 40; Future vision: Where is manufacturing headed?; Electrical distribution, redefined
SCADA at the junction, Managing risk through maintenance, Moving at the speed of data
Safety at every angle, Big Data's impact on operations, bridging the skills gap
The digital oilfield: Utilizing Big Data can yield big savings; Virtualization a real solution; Tracking SIS performance
Applying network redundancy; Overcoming loop tuning challenges; PID control and networks
Driving motor efficiency; Preventing arc flash in mission critical facilities; Integrating alternative power and existing electrical systems
Package boilers; Natural gas infrared heating; Thermal treasure; Standby generation; Natural gas supports green efforts

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This article collection contains several articles on the vital role of plant safety and offers advice on best practices.
This article collection contains several articles on the Industrial Internet of Things (IIoT) and how it is transforming manufacturing.
This article collection contains several articles on strategic maintenance and understanding all the parts of your plant.
click me