Top Consulting-Specifying Engineer Articles, August 2011

Most visited articles at www.csemag.com during August 2011 included getting to know the new lighting code, using geothermal systems to obtain net zero, chiller plants in humid zones, engineering smart hospitals, and MEP project profiles from the 2011 MEP Giants.

09/02/2011


August 2011’s leading Consulting-Specifying Engineer online stories include:

Know the newest lighting code - Justin Schultz and Michael Chow explain the new ANSI/ASHRAE/IESNA 90.1-2010 lighting and lighting control changes. Figure 5: Exterior lighting zones are shown. Defined zones allow for differentiation between building sites to allow more lighting in well-lit zones and less lighting in dim-lit zones. Courtesy: Dept. of Energy Building Energy Codes Program

Achieving net zero with geothermal systems - In order to meet the most stringent definition of a net zero building, a building must have net zero energy and water usage, and waste production; geothermal systems are one way to meet those Five condenser water pumps were installed with variable frequency drives for soft start and stop. Courtesy: Southland Industriesrequirements. 

Using chiller plants in humid zones - In this article, using chiller plants in humid zones is discussed; including an example of dual chiller plants achieving energy efficiency for a federal office building in Washington, D.C. 

MEP Giants Project Profiles - As part of the 2011 program, MEP Giants submitted project profiles detailing the variety of projects across the globe, with 50 of the 100 responding, there’s quite a lot to see.

Smart hospital engineering - In Consulting-Specifying Engineer August, expert engineers offered advice on engineering hospital systems intelligently, from HVAC to fire/life safety.



No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
IIoT grows up; Six ways to lower IIoT costs; Six mobile safety strategies; 2017 Salary Survey
2016 Top Plant; 2016 Best Practices on manufacturing progress, efficiency, safety
2016 Product of the Year; Diagnose bearing failures; Asset performance management; Testing dust collector performance measures
Future of oil and gas projects; Reservoir models; The importance of SCADA to oil and gas
Big Data and bigger solutions; Tablet technologies; SCADA developments
SCADA at the junction, Managing risk through maintenance, Moving at the speed of data
What controller fits your application; Permanent magnet motors; Chemical manufacturer tames alarm management; Taking steps in a new direction
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
Package boilers; Natural gas infrared heating; Thermal treasure; Standby generation; Natural gas supports green efforts

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Motion control advances and solutions can help with machine control, automated control on assembly lines, integration of robotics and automation, and machine safety.
This article collection contains several articles on the vital role of plant safety and offers advice on best practices.
This article collection contains several articles on preventing compressed air leaks and centrifugal air compressor basics and best practices for the "fifth utility" in manufacturing plants.
Maintenance Manager; California Oils Corp.
Associate, Electrical Engineering; Wood Harbinger
Control Systems Engineer; Robert Bosch Corp.
click me