Top 5 Plant Engineering articles, November 9-15: 2015 Product of the Year Finalists, arc flash energy analysis, Leaders under 40, more.

Articles about the 2015 Product of the Year finalists, arc flash energy analysis, Leaders under 40, arc flash NFPA 70E, and STEM education were Plant Engineering's five most-clicked articles from last week, November 2-8. Were you out last week? You can catch up here.

11/16/2015


Plant Engineering Top 5 most read articles online, for Nov. 9-15, covered the 2015 Product of the Year finalists, arc flash energy analysis, Leaders under 40, arc flash NFPA 70E, and STEM education. Link to each article below.

1. 2015 Product of the Year Finalists 

Plant Engineering offers these 2015 Product of the Year Finalists for your consideration and your votes. 

2. Ten essential steps to support arc flash incident energy analysis

These 10 essential steps after receipt of an arc-flash-incident energy analysis will help enhance personnel and equipment protection, and help support compliance with NFPA and OSHA standards.

3. 2015 Engineering Leaders Under 40

The 2015 Engineering Leaders Under 40 are a dedicated group of engineers that give hope to the future of manufacturing.

4. Arc Flash NFPA 70E Webcast: Your questions answered

Webcast presenter Brian Downie answered additional questions about topics such as reviewing the arc flash program, labeling requirements, PPE, and reducing dangerous levels of arc flash. 

5. Bridging the racial gap in STEM education

Experts from National Action Council for Minorities in Engineering and University of Illinois at Urbana Champaign College of Engineering offered advice about science, technology, engineering, and mathematrics (STEM) education. See three STEM tips for parents and engineers. 

The list was developed using CFE Media's web analytics for stories viewed on www.plantengineering.com, November 9-15, for articles published within the last two months. 

-Erin Dunne, production coordinator, CFE Media, edunne@cfemedia.com



No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
IIoT grows up; Six ways to lower IIoT costs; Six mobile safety strategies; 2017 Salary Survey
2016 Top Plant; 2016 Best Practices on manufacturing progress, efficiency, safety
2016 Product of the Year; Diagnose bearing failures; Asset performance management; Testing dust collector performance measures
Future of oil and gas projects; Reservoir models; The importance of SCADA to oil and gas
Big Data and bigger solutions; Tablet technologies; SCADA developments
SCADA at the junction, Managing risk through maintenance, Moving at the speed of data
What controller fits your application; Permanent magnet motors; Chemical manufacturer tames alarm management; Taking steps in a new direction
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
Package boilers; Natural gas infrared heating; Thermal treasure; Standby generation; Natural gas supports green efforts

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Motion control advances and solutions can help with machine control, automated control on assembly lines, integration of robotics and automation, and machine safety.
This article collection contains several articles on the vital role of plant safety and offers advice on best practices.
This article collection contains several articles on preventing compressed air leaks and centrifugal air compressor basics and best practices for the "fifth utility" in manufacturing plants.
Maintenance Manager; California Oils Corp.
Associate, Electrical Engineering; Wood Harbinger
Control Systems Engineer; Robert Bosch Corp.
click me