Top 5 Plant Engineering articles, March 28-April 3: Product of the Year winners, corrective maintenance repairs, maintaining deepwater wells, more
Articles about the 2015 Product of the Year winners, corrective maintenance repairs, maintaining deepwater wells, subsea repairs, and the skills gap were Plant Engineering's five most clicked articles from last week, March 28-April 3. Were you out last week? You can catch up here.
Plant Engineering Top 5 most read articles online, for March 28 to April 3, covered the 2015 Product of the Year winners, corrective maintenance repairs, maintaining deepwater wells, subsea repairs, and the skills gap. Link to each article below.
Plant Engineering's 2015 Product of the Year program consisted of 15 categories with 52 winners. The awards were presented to the winners at the 2016 Engineering Awards in Manufacturing dinner hosted by both Plant Engineering and Control Engineering.
There has been a lot of discussion as to why we are asking technicians to write corrective work orders for problems found on a PM instead of fixing the issue on the spot. If we consider the example of the four machines within the article, it becomes clear why this is the case.
The full effect of cheap oil on deepwater production is yet to be seen. Operators are cutting capital investment but remain committed to replacing production. One analysis suggests that the cost of adding recoverable reserves by intervention in producing fields is cheaper than by development of new fields.
Depressed oil and gas prices and the resulting cuts in capital spending for exploration and production have made headlines in the petroleum industry. Shrinking cash flows have had similar impacts on the other on aging offshore infrastructure. Many pipelines designed to be replaced 10 to 15 years after the first flow continue to operate after 20 or even 30 years of service.
The reported skills shortage can be greatly alleviated with the new productivity best practices and by new definitions of the old work augmented with better shop practices—which produce more productive teams with new tools to apply to old tasks.
This list was developed using CFE Media's web analytics for stories viewed on www.plantengineering.com, March 28 to April 3, for articles published within the last two months.
—Erin Dunne, production coordinator, CFE Media, firstname.lastname@example.org.
- Events & Awards
- Magazine Archives
- Oil & Gas Engineering
- Salary Survey
- Digital Reports
- Survey Prize Winners
Annual Salary Survey
Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.
There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.
But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.
Read more: 2015 Salary Survey