Top 5 Plant Engineering articles August 8-14: Four causes of water hammer damage, managing air quality, IR inspections, more
Articles about four causes of water hammer damage, managing air quality, IR inspections, CMMS benefits and functions, and Big Data were Plant Engineering's five most clicked articles from last week, August 8-14. Were you out? You can catch up here.
Plant Engineering top 5 most read articles from August 8-14, covered four causes of water hammer damage, managing air quality, IR inspections, CMMS benefits and functions, and Big Data. Link to each article below.
Water hammer is not only a system issue; it is primarily a safety issue. Understanding the naturee and severity of water hammer in a steam and condensate system will plants to avoid the safety issue and destructive forces.
Given the range of potential problems, i-plant dust/particles are a dangerous issue that simply cannot be ignored. Any company engaged in a process handling or particulate generating operation will benefit form proper control practices.
Part 1 of 3: Because of the many facets of IR scans, this is the first of a three-part series which sheds light on an important part of a predictive maintenance program.
By incorporating your quality and engineering teams into an advanced CMMS, you can enable better communication, increased productivity, and improved efficiency across your enterprise. Part 1 of a series.
By automating the Big Data analysis, ranking asset needs by priority, and generating actionable plans, asset performance management (APM) programs can help plant operators identify emerging trends and take immediate action to mitigate any risk of failure.
This list was developed using CFE Media's web analytics for stories viewed on www.plantengineering.com, August 8-14, for articles published within the last two months.
Erin Dunne, production coordinator, CFE Media, firstname.lastname@example.org.
- Events & Awards
- Magazine Archives
- Oil & Gas Engineering
- Salary Survey
- Digital Reports
- Survey Prize Winners
- CFE Edu
Annual Salary Survey
Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.
There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.
But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.
Read more: 2015 Salary Survey