Top 5 Control Engineering articles, March 17-23
Were you out last week? Miss something? Here are Control Engineering's five most-clicked articles from last week, March 17-23, including articles about intermittent high-voltage fault, PLC, harmonics in electrical systems, OEMs, and robotic controls.
Application Update: Troubleshoot a high-voltage electrical fault and see recommended solutions.
Inside Machines: The PLCopen working group for motion control has standardized and logically defined all aspects of machine control programming, providing one of the best attempts of integrating PLC, robot, and motion control in an easy-to-understand language common among many manufacturers.
Although devices using power electronics can produce distortion in electrical distribution systems, it's up to the engineer to apply effective solutions to mitigate them.
Triangle Research International Inc. (TRi) is supplying original equipment manufacturers with the brain of its top-of-the-line PLC in a small CPU board called SmartTILE (TRi Integrated Logic Engine), so OEMs can optimize their equipment with less time and effort.
Open robotic control: For facilities that already use programmable logic controllers (PLCs) for other machine control functions, integrating robotic control into a PLC may be a wiser choice than relying on the controller provided by the robot manufacturer. Here's what to consider.
The list was developed using CFE Media's web analytics for stories viewed on www.controleng.com, March 17 - 23, for articles published within the last two months.
- Jessica DuBois-Maahs, associate content manager, CFE Media, email@example.com
- Events & Awards
- Magazine Archives
- Oil & Gas Engineering
- Salary Survey
- Digital Reports
Annual Salary Survey
Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.
There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.
But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.
Read more: 2015 Salary Survey