TLC Engineering names five associates

TLC Engineering for Architecture's board of directors has announced five new associates.

08/22/2012


Five engineers have been named as associates by TLC Engineering for Architecture by the board of directors. Associates are selected based on their long-term potential as leaders in the firm and their continued individual contribution to the successful efforts of TLC.

Eric Bradford, PE, LEED AP BD+C, structural engineer in TLC's Cocoa office has over nine years experience in structural engineering and construction administration. Courtesy: TLC EngineeringEric Bradford, PE, LEED AP BD+C, structural engineer in TLC's Cocoa office has over nine years experience in structural engineering and construction administration with a diverse design portfolio of educational, recreational, institutional and other commercial structures. In addition, he is an experienced threshold inspector and has provided inspections for various educational and recreational facilities.

Bradford is a past President of the American Society of Civil Engineers (ASCE), Cape Canaveral Branch and Gainesville Branch and a LEED Accredited Professional with the U.S. Green Building Council (USGBC).

He graduated from the University of Florida with a Bachelor’s in Civil Engineering. 

Jeffrey Stash, LEED AP BD+C, senior plumbing and fire protection specialist in TLC's Fort Myers office has over 23 years of engineering experience. Courtesy: TLC EngineeringJeffrey Stash, LEED AP BD+C, senior plumbing and fire protection specialist in TLC's Fort Myers office has over 23 years of engineering experience and is fluent in the International Building Code with extensive knowledge of designing systems that utilize alternative energy sources, including PV panels and solar water heating systems.

He is an active member of the American Society of Plumbing Engineers (ASPE), a LEED Accredited Professional with the U.S. Green Building Council (USGBC) and an Accredited Professional with the American Rainwater Collection Systems Association (ARCSA). He is also a Florida Master Plumber.

Stash is a graduate of Northern Virginia College and Maryland Drafting Institute.

Jamil Aljasir, mechanical specialty designer in TLC's Tampa office, has over 11 years of engineering experience. Courtesy: TLC EngineeringJamil Aljasir, mechanical specialty designer in TLC's Tampa office, has over 11 years of engineering experience on a broad range of building types including aviation, education, office and governmental facilities.

He specializes in mechanical design services, load analysis, commissioning services and maintaining facilities in accordance with sustainable building standards.

Aljasir holds an Associates in Applied Science from the ITT Technical Institute.

Rania Girgis, Business Development Representative for TLC, focusing on the healthcare market, has five years of experience in marketing and business development in the architectural/engineering industry. Courtesy: TLC EngineeringRania Girgis, Business Development Representative for TLC, focusing on the healthcare market, has five years of experience in marketing and business development in the architectural/engineering industry.

She has a bachelor of science degree in education from the University of Central Florida.

She is on the Board of Directors of the Society for Marketing Professional Services (SMPS) Central Florida and a Leadership Associate for the Construction Owners Association of America (COAA).  

Tony Esposito, PE, LEED AP, Mechanical Project Engineer in TLC's Healthcare Division, has over 12 years engineering experience. Courtesy: TLC EngineeringTony Esposito, PE, LEED AP, Mechanical Project Engineer in TLC's Healthcare Division, has over 12 years engineering experience in the design of hospitals and other medical facilities.

He is an active member of the American Society of Heating, Refrigeration, and Air Conditioning Engineers (ASHRAE) Central Florida chapter and a LEED Accredited Professional with the U.S. Green Building Council (USGBC).

Esposito holds a Bachelor of Science in Mechanical Engineering and a Master’s of Business Administration from the University of Central Florida and remains an active alumni at the University.



No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
2017 Lubrication Guide; Software tools; Microgrids and energy strategies; Use robots effectively
Prescriptive maintenance; Hannover Messe 2017 recap; Reduce welding errors
Safety standards and electrical test instruments; Product of the Year winners; Easy and safe electrical design
Infrastructure for natural gas expansion; Artificial lift methods; Disruptive technology and fugitive gas emissions
Mobility as the means to offshore innovation; Preventing another Deepwater Horizon; ROVs as subsea robots; SCADA and the radio spectrum
Future of oil and gas projects; Reservoir models; The importance of SCADA to oil and gas
Diagnostic functions for system safety; Specifying industrial enclosures; Effective decision support for a crisis
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Natural gas for tomorrow's fleets; Colleges and universities moving to CHP; Power and steam and frozen foods

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
Featured articles highlight technologies that enable the Industrial Internet of Things, IIoT-related products and strategies to get data more easily to the user.
This digital report will explore several aspects of how IIoT will transform manufacturing in the coming years.
Maintenance Manager; California Oils Corp.
Associate, Electrical Engineering; Wood Harbinger
Control Systems Engineer; Robert Bosch Corp.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me