Time to buy that electric car?

Have we reached the tipping point where an electric car will be cheaper? Watch this video.

04/29/2011

Flash is required!

Earlier this week, the Chicago Tribune ran a discussion about electric cars. If you recall the last time gas was this expensive a couple of years back, electric cars were on the drawing board, but that was about it. Now they’re available, at least sort of. (You may still have to wait to get an electric Rolls Royce.)

Murray Jones (left), discusses ABB electric vehicle charging technology with Peter Welander, CFE Media, Control Engineering.The article was considering whether that technology is now economically viable and practical, and the answer is: sort of. As for the economic side, here’s a point it made:

“At $5 a gallon, consumers who drive 12,000 miles a year could save on average $2,257 at Commonwealth Edison's off-peak electric rates by switching to a pure electric vehicle, according to an analysis released Wednesday by the Environmental Law and Policy Center.”

That’s great, but when you factor in the price of the car, the article goes on to suggest that it would take about 10 years to break even at current price levels.

The practicality question is another matter. If you buy a Volt, with its ability to recharge itself if necessary, you’re probably OK. If you buy a Leaf, you have to know where you’re going to charge it. You can do that at home, but let’s say you want to go on a road trip that will take you farther than a single charge. Where do you juice up?

ECOtality BLINKThe video clip helps answer that question. Among the things displayed at ABB’s Automation & Power World last week was an electric car charging station and a Nissan Leaf. ABB is keen on deploying this infrastructure, and hopes you will be interested in buying an electric car. In the video, Murray Jones explains what the company is doing, and where the first “electric highways” are being built. If car prices come down a little, this kind of thing could be here sooner than you think. 



No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
World-class maintenance: The three keys to success - Deploy people, process and technology; 2016 Lubrication Guide; Why hydraulic systems get hot
Your leaks start here: Take a disciplined approach with your hydraulic system; U.S. presence at Hannover Messe a rousing success
Hannover Messe 2016: Taking hold of the future - Partner Country status spotlights U.S. manufacturing; Honoring manufacturing excellence: The 2015 Product of the Year Winners
The digital oilfield: Utilizing Big Data can yield big savings; Virtualization a real solution; Tracking SIS performance
Getting to the bottom of subsea repairs: Older pipelines need more attention, and operators need a repair strategy; OTC preview; Offshore production difficult - and crucial
Digital oilfields: Integrated HMI/SCADA systems enable smarter data acquisition; Real-world impact of simulation; Electric actuator technology prospers in production fields
Improving flowmeter calibration; Selecting flowmeters for natural gas; Case study: Streamlining assembly systems using PC-based control; CLPM: Improving process efficiency, throughput
Putting COPS into context; Designing medium-voltage electrical systems; Planning and designing resilient, efficient data centers; The nine steps of designing generator fuel systems
Warehouse winter comfort: The HTHV solution; Cooling with natural gas; Plastics industry booming

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This article collection contains several articles on the vital role that compressed air plays in manufacturing plants.
This article collection contains several articles on the Industrial Internet of Things (IIoT) and how it is transforming manufacturing.
This article collection contains several articles on strategic maintenance and understanding all the parts of your plant.
click me